Tag Archives: steel machine

China Professional ASME/ANSI B29.1-2011 240 Alloy/Carbon Steel/Stainless Steel Transmission Martin Car Parking/Sugar/Coal Machine Roller Chain Standard Sizes

Product Description


ROLLER CHAIN

Roller chain or bush roller chain is the type of chain drive most commonly used for transmission of mechanical power on many kinds of domestic, industrial and agricultural machinery, including conveyors, wire- and tube-drawing machines, printing presses, cars, motorcycles, and bicycles. It consists of a series of short cylindrical rollers held together by side links. It is driven by a toothed wheel called a sprocket. It is a simple, reliable, and efficient means of power transmission.

LUBRICATION

Many driving chains (for example, in factory equipment, or driving a camshaft inside an internal combustion engine) operate in clean environments, and thus the wearing surfaces (that is, the pins and bushings) are safe from precipitation and airborne grit, many even in a sealed environment such as an oil bath. Some roller chains are designed to have o-rings built into the space between the outside link plate and the inside roller link plates. Chain manufacturers began to include this feature in 1971 after the application was invented by Joseph Montano while working for Whitney Chain of Hartford, Connecticut. O-rings were included as a way to improve lubrication to the links of power transmission chains, a service that is vitally important to extending their working life. These rubber fixtures form a barrier that holds factory applied lubricating grease inside the pin and bushing wear areas. Further, the rubber o-rings prevent dirt and other contaminants from entering inside the chain linkages, where such particles would otherwise cause significant wear.[citation needed]

There are also many chains that have to operate in dirty conditions, and for size or operational reasons cannot be sealed. Examples include chains on farm equipment, bicycles, and chain saws. These chains will necessarily have relatively high rates of wear, particularly when the operators are prepared to accept more friction, less efficiency, more noise and more frequent replacement as they neglect lubrication and adjustment.

Many oil-based lubricants attract dirt and other particles, eventually forming an CHINAMFG paste that will compound wear on chains. This problem can be circumvented by use of a “dry” PTFE spray, which forms a solid film after application and repels both particles and moisture.

VARIANTS DESIGN

Layout of a roller chain: 1. Outer plate, 2. Inner plate, 3. Pin, 4. Bushing, 5. Roller
If the chain is not being used for a high wear application (for instance if it is just transmitting motion from a hand-operated lever to a control shaft on a machine, or a sliding door on an oven), then 1 of the simpler types of chain may still be used. Conversely, where extra strength but the smooth drive of a smaller pitch is required, the chain may be “siamesed”; instead of just 2 rows of plates on the outer sides of the chain, there may be 3 (“duplex”), 4 (“triplex”), or more rows of plates running parallel, with bushings and rollers between each adjacent pair, and the same number of rows of teeth running in parallel on the sprockets to match. Timing chains on automotive engines, for example, typically have multiple rows of plates called strands.

Roller chain is made in several sizes, the most common American National Standards Institute (ANSI) standards being 40, 50, 60, and 80. The first digit(s) indicate the pitch of the chain in eighths of an inch, with the last digit being 0 for standard chain, 1 for lightweight chain, and 5 for bushed chain with no rollers. Thus, a chain with half-inch pitch would be a #40 while a #160 sprocket would have teeth spaced 2 inches apart, etc. Metric pitches are expressed in sixteenths of an inch; thus a metric #8 chain (08B-1) would be equivalent to an ANSI #40. Most roller chain is made from plain carbon or alloy steel, but stainless steel is used in food processing machinery or other places where lubrication is a problem, and nylon or brass are occasionally seen for the same reason.

Roller chain is ordinarily hooked up using a master link (also known as a connecting link), which typically has 1 pin held by a horseshoe clip rather than friction fit, allowing it to be inserted or removed with simple tools. Chain with a removable link or pin is also known as cottered chain, which allows the length of the chain to be adjusted. Half links (also known as offsets) are available and are used to increase the length of the chain by a single roller. Riveted roller chain has the master link (also known as a connecting link) “riveted” or mashed on the ends. These pins are made to be durable and are not removable.

USE

An example of 2 ‘ghost’ sprockets tensioning a triplex roller chain system
Roller chains are used in low- to mid-speed drives at around 600 to 800 feet per minute; however, at higher speeds, around 2,000 to 3,000 feet per minute, V-belts are normally used due to wear and noise issues.
A bicycle chain is a form of roller chain. Bicycle chains may have a master link, or may require a chain tool for removal and installation. A similar but larger and thus stronger chain is used on most motorcycles although it is sometimes replaced by either a toothed belt or a shaft drive, which offer lower noise level and fewer maintenance requirements.
The great majority of automobile engines use roller chains to drive the camshaft(s). Very high performance engines often use gear drive, and starting in the early 1960s toothed belts were used by some manufacturers.
Chains are also used in forklifts using hydraulic rams as a pulley to raise and lower the carriage; however, these chains are not considered roller chains, but are classified as lift or leaf chains.
Chainsaw cutting chains superficially resemble roller chains but are more closely related to leaf chains. They are driven by projecting drive links which also serve to locate the chain CHINAMFG the bar.

Sea Harrier FA.2 ZA195 front (cold) vector thrust nozzle – the nozzle is rotated by a chain drive from an air motor
A perhaps unusual use of a pair of motorcycle chains is in the Harrier Jump Jet, where a chain drive from an air motor is used to rotate the movable engine nozzles, allowing them to be pointed downwards for hovering flight, or to the rear for normal CHINAMFG flight, a system known as Thrust vectoring.

WEAR

 

The effect of wear on a roller chain is to increase the pitch (spacing of the links), causing the chain to grow longer. Note that this is due to wear at the pivoting pins and bushes, not from actual stretching of the metal (as does happen to some flexible steel components such as the hand-brake cable of a motor vehicle).

With modern chains it is unusual for a chain (other than that of a bicycle) to wear until it breaks, since a worn chain leads to the rapid onset of wear on the teeth of the sprockets, with ultimate failure being the loss of all the teeth on the sprocket. The sprockets (in particular the smaller of the two) suffer a grinding motion that puts a characteristic hook shape into the driven face of the teeth. (This effect is made worse by a chain improperly tensioned, but is unavoidable no matter what care is taken). The worn teeth (and chain) no longer provides smooth transmission of power and this may become evident from the noise, the vibration or (in car engines using a timing chain) the variation in ignition timing seen with a timing light. Both sprockets and chain should be replaced in these cases, since a new chain on worn sprockets will not last long. However, in less severe cases it may be possible to save the larger of the 2 sprockets, since it is always the smaller 1 that suffers the most wear. Only in very light-weight applications such as a bicycle, or in extreme cases of improper tension, will the chain normally jump off the sprockets.

The lengthening due to wear of a chain is calculated by the following formula:

M = the length of a number of links measured

S = the number of links measured

P = Pitch

In industry, it is usual to monitor the movement of the chain tensioner (whether manual or automatic) or the exact length of a drive chain (one rule of thumb is to replace a roller chain which has elongated 3% on an adjustable drive or 1.5% on a fixed-center drive). A simpler method, particularly suitable for the cycle or motorcycle user, is to attempt to pull the chain away from the larger of the 2 sprockets, whilst ensuring the chain is taut. Any significant movement (e.g. making it possible to see through a gap) probably indicates a chain worn up to and beyond the limit. Sprocket damage will result if the problem is ignored. Sprocket wear cancels this effect, and may mask chain wear.

CHAIN STRENGTH

The most common measure of roller chain’s strength is tensile strength. Tensile strength represents how much load a chain can withstand under a one-time load before breaking. Just as important as tensile strength is a chain’s fatigue strength. The critical factors in a chain’s fatigue strength is the quality of steel used to manufacture the chain, the heat treatment of the chain components, the quality of the pitch hole fabrication of the linkplates, and the type of shot plus the intensity of shot peen coverage on the linkplates. Other factors can include the thickness of the linkplates and the design (contour) of the linkplates. The rule of thumb for roller chain operating on a continuous drive is for the chain load to not exceed a mere 1/6 or 1/9 of the chain’s tensile strength, depending on the type of master links used (press-fit vs. slip-fit)[citation needed]. Roller chains operating on a continuous drive beyond these thresholds can and typically do fail prematurely via linkplate fatigue failure.

The standard minimum ultimate strength of the ANSI 29.1 steel chain is 12,500 x (pitch, in inches)2. X-ring and O-Ring chains greatly decrease wear by means of internal lubricants, increasing chain life. The internal lubrication is inserted by means of a vacuum when riveting the chain together.

CHAIN STHangZhouRDS

Standards organizations (such as ANSI and ISO) maintain standards for design, dimensions, and interchangeability of transmission chains. For example, the following Table shows data from ANSI standard B29.1-2011 (Precision Power Transmission Roller Chains, Attachments, and Sprockets) developed by the American Society of Mechanical Engineers (ASME). See the references[8][9][10] for additional information.

ASME/ANSI B29.1-2011 Roller Chain Standard SizesSizePitchMaximum Roller DiameterMinimum Ultimate Tensile StrengthMeasuring Load25

ASME/ANSI B29.1-2011 Roller Chain Standard Sizes
Size Pitch Maximum Roller Diameter Minimum Ultimate Tensile Strength Measuring Load
25 0.250 in (6.35 mm) 0.130 in (3.30 mm) 780 lb (350 kg) 18 lb (8.2 kg)
35 0.375 in (9.53 mm) 0.200 in (5.08 mm) 1,760 lb (800 kg) 18 lb (8.2 kg)
41 0.500 in (12.70 mm) 0.306 in (7.77 mm) 1,500 lb (680 kg) 18 lb (8.2 kg)
40 0.500 in (12.70 mm) 0.312 in (7.92 mm) 3,125 lb (1,417 kg) 31 lb (14 kg)
50 0.625 in (15.88 mm) 0.400 in (10.16 mm) 4,880 lb (2,210 kg) 49 lb (22 kg)
60 0.750 in (19.05 mm) 0.469 in (11.91 mm) 7,030 lb (3,190 kg) 70 lb (32 kg)
80 1.000 in (25.40 mm) 0.625 in (15.88 mm) 12,500 lb (5,700 kg) 125 lb (57 kg)
100 1.250 in (31.75 mm) 0.750 in (19.05 mm) 19,531 lb (8,859 kg) 195 lb (88 kg)
120 1.500 in (38.10 mm) 0.875 in (22.23 mm) 28,125 lb (12,757 kg) 281 lb (127 kg)
140 1.750 in (44.45 mm) 1.000 in (25.40 mm) 38,280 lb (17,360 kg) 383 lb (174 kg)
160 2.000 in (50.80 mm) 1.125 in (28.58 mm) 50,000 lb (23,000 kg) 500 lb (230 kg)
180 2.250 in (57.15 mm) 1.460 in (37.08 mm) 63,280 lb (28,700 kg) 633 lb (287 kg)
200 2.500 in (63.50 mm) 1.562 in (39.67 mm) 78,175 lb (35,460 kg) 781 lb (354 kg)
240 3.000 in (76.20 mm) 1.875 in (47.63 mm) 112,500 lb (51,000 kg) 1,000 lb (450 kg

For mnemonic purposes, below is another presentation of key dimensions from the same standard, expressed in fractions of an inch (which was part of the thinking behind the choice of preferred numbers in the ANSI standard):

Pitch (inches) Pitch expressed
in eighths
ANSI standard
chain number
Width (inches)
14 28 25 18
38 38 35 316
12 48 41 14
12 48 40 516
58 58 50 38
34 68 60 12
1 88 80 58

Notes:
1. The pitch is the distance between roller centers. The width is the distance between the link plates (i.e. slightly more than the roller width to allow for clearance).
2. The right-hand digit of the standard denotes 0 = normal chain, 1 = lightweight chain, 5 = rollerless bushing chain.
3. The left-hand digit denotes the number of eighths of an inch that make up the pitch.
4. An “H” following the standard number denotes heavyweight chain. A hyphenated number following the standard number denotes double-strand (2), triple-strand (3), and so on. Thus 60H-3 denotes number 60 heavyweight triple-strand chain.
 A typical bicycle chain (for derailleur gears) uses narrow 1⁄2-inch-pitch chain. The width of the chain is variable, and does not affect the load capacity. The more sprockets at the rear wheel (historically 3-6, nowadays 7-12 sprockets), the narrower the chain. Chains are sold according to the number of speeds they are designed to work with, for example, “10 speed chain”. Hub gear or single speed bicycles use 1/2″ x 1/8″ chains, where 1/8″ refers to the maximum thickness of a sprocket that can be used with the chain.

Typically chains with parallel shaped links have an even number of links, with each narrow link followed by a broad one. Chains built up with a uniform type of link, narrow at 1 and broad at the other end, can be made with an odd number of links, which can be an advantage to adapt to a special chainwheel-distance; on the other side such a chain tends to be not so strong.

Roller chains made using ISO standard are sometimes called as isochains.

 

WHY CHOOSE US 

1. Reliable Quality Assurance System
2. Cutting-Edge Computer-Controlled CNC Machines
3. Bespoke Solutions from Highly Experienced Specialists
4. Customization and OEM Available for Specific Application
5. Extensive Inventory of Spare Parts and Accessories
6. Well-Developed CHINAMFG Marketing Network
7. Efficient After-Sale Service System

 

The 219 sets of advanced automatic production equipment provide guarantees for high product quality. The 167 engineers and technicians with senior professional titles can design and develop products to meet the exact demands of customers, and OEM customizations are also available with us. Our sound global service network can provide customers with timely after-sales technical services.

We are not just a manufacturer and supplier, but also an industry consultant. We work pro-actively with you to offer expert advice and product recommendations in order to end up with a most cost effective product available for your specific application. The clients we serve CHINAMFG range from end users to distributors and OEMs. Our OEM replacements can be substituted wherever necessary and suitable for both repair and new assemblies.

 

Standard or Nonstandard: Standard
Application: Textile Machinery, Garment Machinery, Conveyer Equipment, Packaging Machinery, Electric Cars, Motorcycle, Food Machinery, Marine, Mining Equipment, Agricultural Machinery, Car, Textile Machinery, Garment Machinery, Conveyor
Surface Treatment: Polishing
Samples:
US$ 3/Meter
1 Meter(Min.Order)

|

Order Sample

Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

China Professional ASME/ANSI B29.1-2011 240 Alloy/Carbon Steel/Stainless Steel Transmission Martin Car Parking/Sugar/Coal Machine Roller Chain Standard Sizes

car parking chain

Can car parking chains be integrated with access control systems, such as key cards or remote controls?

Yes, car parking chains can be integrated with access control systems, allowing for more efficient and convenient vehicle access in parking facilities. Integration with access control systems offers several benefits:

1. Key Cards: Parking chains can be linked to electronic access control systems that use key cards or RFID tags. Authorized users are provided with key cards that they can swipe or tap at the entrance to raise the chain, granting them access to the parking area.

2. Remote Controls: In automated parking chains, remote controls can be used to raise or lower the chains. This is particularly useful for parking attendants or personnel who can remotely manage vehicle access from a central location, reducing the need for physical presence at the entrance.

3. Electronic Passes: Some parking facilities issue electronic passes to authorized users. These passes can be read by sensors at the entrance, automatically raising the chain to allow access without the need for manual operation.

4. License Plate Recognition: Advanced access control systems may use license plate recognition technology to automatically identify and grant access to pre-registered vehicles as they approach the entrance, eliminating the need for physical cards or passes.

5. Time-Based Access: Access control systems can be configured to grant access only during specific times or days. This is particularly useful for parking facilities with restricted access hours or reserved parking spaces for certain users.

6. Enhanced Security: Integration with access control systems improves security by ensuring that only authorized vehicles can enter the parking area, reducing the risk of unauthorized access or parking violations.

7. Efficient Traffic Management: Automated access control systems can process vehicles more quickly, reducing waiting times and traffic congestion at the entrance during peak hours.

By integrating car parking chains with access control systems, parking facilities can enhance security, improve user experience, and efficiently manage vehicle access, making it a popular choice for modern parking facilities.

car parking chain

What are the maintenance requirements for car parking chains to ensure smooth operation over time?

Regular maintenance is essential to ensure the smooth operation and longevity of car parking chains. Proper care and attention will help prevent malfunctions and ensure reliable access control in parking facilities. Here are the key maintenance requirements:

1. Cleaning: Regularly clean the parking chains to remove dirt, dust, and debris that can accumulate over time. Clean chains ensure smooth movement and prevent unnecessary wear.

2. Lubrication: Apply appropriate lubrication to the chain links and any moving parts of the chain mechanism. Lubrication reduces friction and wear, allowing the chain to move smoothly.

3. Inspection: Conduct routine inspections of the parking chains to identify any signs of wear, damage, or misalignment. Promptly address any issues to prevent further damage and ensure optimal performance.

4. Adjustments: Check the tension and alignment of the chains regularly. Make necessary adjustments to ensure the chain remains properly tensioned and aligned.

5. Replacement of Worn Parts: If any components of the parking chain show significant wear or damage, replace them promptly to maintain the chain’s integrity and functionality.

6. Weather Protection: Apply protective coatings or paint to steel chains to minimize the impact of weather elements and reduce the risk of corrosion.

7. Addressing Corrosion: For chains made of materials susceptible to corrosion, such as steel, regularly inspect for signs of rust and treat affected areas to prevent further corrosion.

8. Preventing Obstructions: Ensure that the area around the parking chains is clear of any obstacles that could hinder their movement or cause damage.

9. Training and Education: Train parking attendants or personnel responsible for operating the parking chains to handle them properly and conduct basic maintenance tasks.

10. Regular Testing: Periodically test the raising and lowering mechanism of the parking chains to verify that they are functioning correctly.

By adhering to these maintenance requirements, parking facility managers can ensure the smooth operation and reliability of car parking chains, minimizing downtime and ensuring efficient access control for vehicles in the long run.

car parking chain

What is a car parking chain, and how is it used in parking facilities and garages?

A car parking chain is a mechanical barrier used in parking facilities and garages to control vehicle access and prevent unauthorized entry. It consists of a sturdy metal chain suspended across the entrance or exit of a parking area.

The chain is connected to two sturdy posts or walls on either side of the entrance. When lowered, the chain obstructs the passage of vehicles, restricting their entry or exit. Conversely, when lifted, it allows authorized vehicles to pass through.

Parking chains are commonly used in places where a more sophisticated access control system like a gate or a barrier arm may not be necessary. They offer a simple and cost-effective solution for managing vehicle flow.

Typically, parking facility attendants or authorized personnel are responsible for controlling the car parking chain. They manually raise and lower the chain using a key or a specialized lock system.

In some cases, modern parking chains may be automated and integrated with access control systems. This can include keycard readers, electronic passes, or even remote-controlled mechanisms, making it more convenient for authorized users to enter and exit the parking area.

Overall, car parking chains serve as a physical deterrent to prevent unauthorized access and ensure better control over vehicle movement in parking facilities and garages.

“`
China Professional ASME/ANSI B29.1-2011 240 Alloy/Carbon Steel/Stainless Steel Transmission Martin Car Parking/Sugar/Coal Machine Roller Chain Standard Sizes  China Professional ASME/ANSI B29.1-2011 240 Alloy/Carbon Steel/Stainless Steel Transmission Martin Car Parking/Sugar/Coal Machine Roller Chain Standard Sizes
editor by CX 2023-10-10

China factory EL Leaf Chain Long Pitch Flat Top Table Car Parking Drag Sharp Al Bl EL for Mine Machinery Grain Durable Machine Supplier Forging Stainless Steel Leaf Chains

Product Description

EL Leaf Chain Long Pitch Flat Top Table Car Parking Drag Sharp AL BL EL for Mine Machinery Grain Durable Machine Supplier Forging Stainless Steel Leaf Chains

Application of Leaf Chain

Leaf chains are used in a variety of applications, including:

  • Forklift trucks: Leaf chains are used in the masts of forklift trucks to lift and lower loads.
  • Conveyors: Leaf chains are used in conveyors to move materials from 1 place to another.
  • Wind turbines: Leaf chains are used in wind turbines to transmit power from the turbine blades to the generator.
  • Machine tools: Leaf chains are used in machine tools to move parts and tools.
  • Robotics: Leaf chains are used in robotics to move the robot’s arms and legs.

Leaf chains are a type of chain that is made up of a series of plates connected by pins. The plates are designed to flex, which allows the chain to absorb shock and vibration. This makes leaf chains ideal for applications where there is a lot of movement or where the chain is exposed to harsh conditions.

Leaf chains are a durable and reliable type of chain that can be used in a variety of applications. They are a cost-effective option for many applications, and they offer a number of advantages over other types of chains, such as their ability to absorb shock and vibration.

Here are some of the advantages of using leaf chains:

  • Durability: Leaf chains are very durable and can withstand a lot of wear and tear.
  • Strength: Leaf chains are very strong and can transmit a lot of power.
  • Inexpensive: Leaf chains are relatively inexpensive, which makes them a cost-effective option for many applications.
  • Flexibility: Leaf chains are very flexible, which makes them ideal for applications where there is a lot of movement.
  • Shock absorption: Leaf chains are very good at absorbing shock and vibration, which makes them ideal for applications where these factors are a concern.

Here are some of the disadvantages of using leaf chains:

  • Noise: Leaf chains can be noisy, which can be a problem in some applications.
  • Maintenance: Leaf chains require regular maintenance to keep them in good condition.
  • Limited load capacity: Leaf chains have a limited load capacity, which can limit their use in some applications.

Overall, leaf chains are a versatile and durable type of chain that can be used in a variety of applications. They are a cost-effective option for many applications, and they offer a number of advantages over other types of chains.

 

Usage: Transmission Chain, Drag Chain, Conveyor Chain, Dedicated Special Chain
Material: Stainless steel
Surface Treatment: Oil Blooming
Feature: Oil Resistant
Chain Size: 1/2"*3/32"
Structure: Roller Chain
Samples:
US$ 9999/Piece
1 Piece(Min.Order)

|
Request Sample

China factory EL Leaf Chain Long Pitch Flat Top Table Car Parking Drag Sharp Al Bl EL for Mine Machinery Grain Durable Machine Supplier Forging Stainless Steel Leaf Chains

car parking chain

What are the best practices for maintaining and cleaning car parking chains to extend their lifespan?

Proper maintenance and regular cleaning are essential to extend the lifespan of car parking chains. By following these best practices, you can ensure the chains remain in good working condition and provide reliable access control for an extended period:

1. Regular Inspections: Conduct routine inspections of the parking chains to identify signs of wear, damage, or misalignment. Promptly address any issues to prevent further damage and ensure optimal performance.

2. Lubrication: Apply appropriate lubrication to the chain links and any moving parts of the chain mechanism. Lubrication reduces friction and wear, allowing the chain to move smoothly.

3. Cleaning: Regularly clean the parking chains to remove dirt, dust, and debris that can accumulate over time. Clean chains ensure smooth movement and prevent unnecessary wear.

4. Remove Obstructions: Ensure that the area around the parking chains is clear of any obstacles that could hinder their movement or cause damage.

5. Weather Protection: Apply protective coatings or paint to steel chains to minimize the impact of weather elements and reduce the risk of corrosion.

6. Addressing Corrosion: For chains made of materials susceptible to corrosion, such as steel, regularly inspect for signs of rust and treat affected areas to prevent further corrosion.

7. Tension and Alignment: Check the tension and alignment of the chains regularly. Make necessary adjustments to ensure the chain remains properly tensioned and aligned.

8. Use Quality Materials: Invest in high-quality parking chains made from durable materials to ensure their longevity and resistance to wear and tear.

9. Proper Handling: Train parking attendants or personnel responsible for operating the parking chains to handle them properly and avoid unnecessary stress or damage.

10. Follow Manufacturer’s Guidelines: Adhere to the manufacturer’s guidelines and recommendations for maintenance and care.

By following these best practices, you can significantly extend the lifespan of car parking chains and ensure they provide reliable access control in parking facilities for many years.

car parking chain

What are the safety features of car parking chains to prevent accidents and injuries?

Car parking chains are designed with several safety features to prevent accidents and injuries. These features ensure that the chains operate safely and effectively, protecting both vehicles and users. Some common safety features include:

1. Reflective Elements: Many parking chains have reflective coatings or materials to enhance visibility, especially during low-light conditions. This makes the chains more noticeable to drivers and pedestrians, reducing the risk of collisions.

2. Smooth and Even Surface: Parking chains are manufactured with smooth and even surfaces to prevent any sharp edges or protrusions that could cause injuries or damage to vehicles.

3. Clear Signage: Proper signage is placed near the parking chains to inform users of their presence and how to operate them. This helps prevent confusion and misuse.

4. Low Friction: Chains are often lubricated to reduce friction and ensure smooth movement, minimizing the risk of accidents caused by chain jams or abrupt stops.

5. Emergency Access: Parking chains are designed with emergency access in mind. In manual systems, there are quick-release mechanisms to allow easy removal of the chain in emergency situations or to facilitate access for emergency vehicles.

6. Height and Clearance: Proper clearance is maintained to prevent chains from interfering with vehicles or causing damage during entry or exit.

7. Secure Mounting: Parking chains are securely mounted to prevent accidental detachment or falling, especially in retractable systems.

8. Load Capacity: For automatic systems, parking chains are designed to handle the weight of vehicles passing through, ensuring they can safely support the load.

9. Regular Maintenance: Regular inspections and maintenance help identify any safety issues and address them promptly, ensuring the chains remain safe for use.

10. Training and Education: Parking attendants and users should receive proper training on how to operate the parking chains safely and effectively.

By incorporating these safety features and promoting responsible use, car parking chains can effectively prevent accidents and injuries, providing a secure and controlled parking environment for all users.

car parking chain

What are the standard sizes and configurations available for car parking chains?

Car parking chains come in various sizes and configurations to accommodate different parking facility needs. The standard sizes and configurations include:

1. Length: Parking chains are available in different lengths to span across various entrance or exit widths. Common lengths range from 10 feet (3 meters) to 20 feet (6 meters) to cover typical driveway widths.

2. Link Diameter: The diameter of the individual chain links can vary, with common sizes being around 1/4 inch (6mm) to 3/8 inch (10mm). Thicker links provide additional strength and durability.

3. Material: Parking chains are usually made from sturdy metals like steel, which ensures they can withstand outdoor conditions and the weight of vehicles.

4. Color: While the most common color for parking chains is standard metal silver, some manufacturers offer chains with colored coatings for aesthetic purposes or enhanced visibility.

5. Configurations: There are two primary configurations of parking chains:

  • Fixed: Fixed parking chains are permanently mounted on sturdy posts or walls on either side of the entrance or exit. They are not adjustable in length and remain in place at all times.
  • Retractable: Retractable or removable parking chains can be raised or lowered as needed. They are connected to retractable posts or bollards, allowing attendants or automated systems to control access by raising or lowering the chain.

It’s essential to choose the appropriate size and configuration based on the specific requirements of the parking facility, the expected volume of traffic, and the level of security needed.

China factory EL Leaf Chain Long Pitch Flat Top Table Car Parking Drag Sharp Al Bl EL for Mine Machinery Grain Durable Machine Supplier Forging Stainless Steel Leaf Chains  China factory EL Leaf Chain Long Pitch Flat Top Table Car Parking Drag Sharp Al Bl EL for Mine Machinery Grain Durable Machine Supplier Forging Stainless Steel Leaf Chains
editor by CX 2023-10-08

China manufacturer EL Leaf Chain Long Pitch Flat Top Table Car Parking Drag Sharp Al Bl EL for Mine Machinery Grain Durable Machine Supplier Forging Stainless Steel Leaf Chains

Product Description

EL Leaf Chain Long Pitch Flat Top Table Car Parking Drag Sharp AL BL EL for Mine Machinery Grain Durable Machine Supplier Forging Stainless Steel Leaf Chains

Application of Leaf Chain

Leaf chains are used in a variety of applications, including:

  • Forklift trucks: Leaf chains are used in the masts of forklift trucks to lift and lower loads.
  • Conveyors: Leaf chains are used in conveyors to move materials from 1 place to another.
  • Wind turbines: Leaf chains are used in wind turbines to transmit power from the turbine blades to the generator.
  • Machine tools: Leaf chains are used in machine tools to move parts and tools.
  • Robotics: Leaf chains are used in robotics to move the robot’s arms and legs.

Leaf chains are a type of chain that is made up of a series of plates connected by pins. The plates are designed to flex, which allows the chain to absorb shock and vibration. This makes leaf chains ideal for applications where there is a lot of movement or where the chain is exposed to harsh conditions.

Leaf chains are a durable and reliable type of chain that can be used in a variety of applications. They are a cost-effective option for many applications, and they offer a number of advantages over other types of chains, such as their ability to absorb shock and vibration.

Here are some of the advantages of using leaf chains:

  • Durability: Leaf chains are very durable and can withstand a lot of wear and tear.
  • Strength: Leaf chains are very strong and can transmit a lot of power.
  • Inexpensive: Leaf chains are relatively inexpensive, which makes them a cost-effective option for many applications.
  • Flexibility: Leaf chains are very flexible, which makes them ideal for applications where there is a lot of movement.
  • Shock absorption: Leaf chains are very good at absorbing shock and vibration, which makes them ideal for applications where these factors are a concern.

Here are some of the disadvantages of using leaf chains:

  • Noise: Leaf chains can be noisy, which can be a problem in some applications.
  • Maintenance: Leaf chains require regular maintenance to keep them in good condition.
  • Limited load capacity: Leaf chains have a limited load capacity, which can limit their use in some applications.

Overall, leaf chains are a versatile and durable type of chain that can be used in a variety of applications. They are a cost-effective option for many applications, and they offer a number of advantages over other types of chains.

 

Usage: Transmission Chain, Drag Chain, Conveyor Chain, Dedicated Special Chain
Material: Stainless steel
Surface Treatment: Oil Blooming
Feature: Oil Resistant
Chain Size: 1/2"*3/32"
Structure: Roller Chain
Samples:
US$ 9999/Piece
1 Piece(Min.Order)

|
Request Sample

China manufacturer EL Leaf Chain Long Pitch Flat Top Table Car Parking Drag Sharp Al Bl EL for Mine Machinery Grain Durable Machine Supplier Forging Stainless Steel Leaf Chains

car parking chain

Can car parking chains be integrated with access control systems, such as key cards or remote controls?

Yes, car parking chains can be integrated with access control systems, allowing for more efficient and convenient vehicle access in parking facilities. Integration with access control systems offers several benefits:

1. Key Cards: Parking chains can be linked to electronic access control systems that use key cards or RFID tags. Authorized users are provided with key cards that they can swipe or tap at the entrance to raise the chain, granting them access to the parking area.

2. Remote Controls: In automated parking chains, remote controls can be used to raise or lower the chains. This is particularly useful for parking attendants or personnel who can remotely manage vehicle access from a central location, reducing the need for physical presence at the entrance.

3. Electronic Passes: Some parking facilities issue electronic passes to authorized users. These passes can be read by sensors at the entrance, automatically raising the chain to allow access without the need for manual operation.

4. License Plate Recognition: Advanced access control systems may use license plate recognition technology to automatically identify and grant access to pre-registered vehicles as they approach the entrance, eliminating the need for physical cards or passes.

5. Time-Based Access: Access control systems can be configured to grant access only during specific times or days. This is particularly useful for parking facilities with restricted access hours or reserved parking spaces for certain users.

6. Enhanced Security: Integration with access control systems improves security by ensuring that only authorized vehicles can enter the parking area, reducing the risk of unauthorized access or parking violations.

7. Efficient Traffic Management: Automated access control systems can process vehicles more quickly, reducing waiting times and traffic congestion at the entrance during peak hours.

By integrating car parking chains with access control systems, parking facilities can enhance security, improve user experience, and efficiently manage vehicle access, making it a popular choice for modern parking facilities.

car parking chain

How do I choose the right car parking chain for my parking facility based on traffic volume and vehicle types?

Choosing the right car parking chain for your parking facility involves considering the traffic volume and types of vehicles that will use the facility. Here are the key factors to consider:

1. Traffic Volume:

– For high-traffic areas with a significant number of vehicles entering and exiting frequently, consider a durable and heavy-duty parking chain made from materials like steel or stainless steel. These materials can withstand the wear and tear associated with frequent use.

– For low-traffic areas or temporary parking setups, lighter materials like plastic or PVC chains may be suitable as they are more cost-effective.

2. Vehicle Types:

– For standard passenger cars and small vehicles, most parking chains should be sufficient. However, consider the length of the chain to accommodate wider entry points.

– For larger vehicles, such as trucks or buses, ensure that the parking chain is robust enough to support their weight and size. Opt for heavy-duty chains with thicker links and higher load-bearing capacity.

3. Manual vs. Automatic:

– Manual parking chains operated by attendants may be suitable for smaller parking facilities with moderate traffic. They offer a cost-effective and simple access control solution.

– Automatic parking chains integrated with electronic access control systems are more suitable for larger parking facilities or those with high traffic volume. They provide faster and more efficient access control, minimizing waiting times.

4. Customization:

– Consider whether you require customized parking chains to fit specific dimensions or to align with the overall aesthetic of the parking facility.

5. Environmental Factors:

– For outdoor parking facilities exposed to harsh weather conditions, opt for materials that offer good corrosion resistance, such as stainless steel or aluminum.

6. Budget:

– Determine the budget available for the parking chains, considering both the initial investment and long-term maintenance costs.

7. Compliance:

– Ensure that the chosen parking chains comply with local regulations and accessibility requirements to provide a safe and accessible parking environment.

By carefully evaluating these factors, you can select the most appropriate car parking chain that aligns with your parking facility’s specific needs, ensuring efficient access control and a positive user experience for all vehicle types and traffic volumes.

car parking chain

What is a car parking chain, and how is it used in parking facilities and garages?

A car parking chain is a mechanical barrier used in parking facilities and garages to control vehicle access and prevent unauthorized entry. It consists of a sturdy metal chain suspended across the entrance or exit of a parking area.

The chain is connected to two sturdy posts or walls on either side of the entrance. When lowered, the chain obstructs the passage of vehicles, restricting their entry or exit. Conversely, when lifted, it allows authorized vehicles to pass through.

Parking chains are commonly used in places where a more sophisticated access control system like a gate or a barrier arm may not be necessary. They offer a simple and cost-effective solution for managing vehicle flow.

Typically, parking facility attendants or authorized personnel are responsible for controlling the car parking chain. They manually raise and lower the chain using a key or a specialized lock system.

In some cases, modern parking chains may be automated and integrated with access control systems. This can include keycard readers, electronic passes, or even remote-controlled mechanisms, making it more convenient for authorized users to enter and exit the parking area.

Overall, car parking chains serve as a physical deterrent to prevent unauthorized access and ensure better control over vehicle movement in parking facilities and garages.

“`
China manufacturer EL Leaf Chain Long Pitch Flat Top Table Car Parking Drag Sharp Al Bl EL for Mine Machinery Grain Durable Machine Supplier Forging Stainless Steel Leaf Chains  China manufacturer EL Leaf Chain Long Pitch Flat Top Table Car Parking Drag Sharp Al Bl EL for Mine Machinery Grain Durable Machine Supplier Forging Stainless Steel Leaf Chains
editor by CX 2023-09-08

China supplier Al Leaf Chain Long Pitch Flat Top Table Car Parking Drag Sharp Al Bl EL for Mine Machinery Grain Durable Machine Supplier Forging Stainless Steel Leaf Chains

Product Description

AL Leaf Chain Long Pitch Flat Top Table Car Parking Drag Sharp AL BL EL for Mine Machinery Grain Durable Machine Supplier Forging Stainless Steel Leaf Chains

Application of Leaf Chains

Leaf chains are a type of chain that is commonly used in a variety of applications, including:

  • Forklift trucks
  • Lift trucks
  • Lift masts
  • Straddle carriers
  • Material handling equipment
  • Conveyors
  • Elevators
  • Hoists
  • Cranes
  • Mining equipment
  • Construction equipment
  • Agricultural equipment

Leaf chains are known for their durability, high tensile strength, and compact design. They are also relatively inexpensive, making them a popular choice for a variety of applications.

Here are some of the specific benefits of using leaf chains:

  • Durability: Leaf chains are made from high-quality steel and are designed to withstand heavy loads and harsh environments.
  • High tensile strength: Leaf chains can support a significant amount of weight, making them ideal for lifting and transporting heavy loads.
  • Compact design: Leaf chains are relatively compact, making them easy to install and maintain.
  • Inexpensive: Leaf chains are relatively inexpensive, making them a cost-effective option for a variety of applications.

If you are looking for a durable, high-strength, and affordable chain for your application, then leaf chains are a great option.

Here are some additional details about the applications of leaf chains:

  • Forklift trucks: Leaf chains are used in the masts of forklift trucks to lift and lower the forks. They are also used in the drive trains of forklift trucks to transmit power from the engine to the wheels.
  • Lift trucks: Leaf chains are used in the masts of lift trucks to lift and lower the forks. They are also used in the drive trains of lift trucks to transmit power from the engine to the wheels.
  • Lift masts: Leaf chains are used in the masts of lift trucks and other material handling equipment to lift and lower loads.
  • Straddle carriers: Leaf chains are used in the drive trains of straddle carriers to transmit power from the engine to the wheels.
  • Material handling equipment: Leaf chains are used in a variety of material handling equipment, such as conveyors, elevators, and hoists.
  • Conveyors: Leaf chains are used in conveyors to move materials from 1 point to another.
  • Elevators: Leaf chains are used in elevators to raise and lower passengers and cargo.
  • Hoists: Leaf chains are used in hoists to lift and lower heavy loads.
  • Cranes: Leaf chains are used in cranes to lift and move heavy loads.
  • Mining equipment: Leaf chains are used in mining equipment to move materials from 1 point to another.
  • Construction equipment: Leaf chains are used in construction equipment to move materials and to lift and move heavy loads.
  • Agricultural equipment: Leaf chains are used in agricultural equipment to move materials and to lift and move heavy loads.

Leaf chains are a versatile and reliable type of chain that can be used in a variety of applications. If you are looking for a durable, high-strength, and affordable chain for your application, then leaf chains are a great option.

 

Usage: Transmission Chain, Drag Chain, Conveyor Chain, Dedicated Special Chain
Material: Stainless steel
Surface Treatment: Oil Blooming
Feature: Oil Resistant
Chain Size: 1/2"*3/32"
Structure: Roller Chain
Samples:
US$ 9999/Piece
1 Piece(Min.Order)

|
Request Sample

China supplier Al Leaf Chain Long Pitch Flat Top Table Car Parking Drag Sharp Al Bl EL for Mine Machinery Grain Durable Machine Supplier Forging Stainless Steel Leaf Chains

car parking chain

How do I install a car parking chain correctly and securely to ensure its proper functioning?

Proper installation is crucial to ensure the car parking chain operates correctly and securely. Follow these steps for a successful installation:

1. Site Assessment:

– Conduct a thorough site assessment to determine the best location for the parking chain. Consider factors such as traffic flow, visibility, and clearance requirements.

2. Choose the Right Chain:

– Select a parking chain that suits the specific needs of your parking facility, considering factors such as traffic volume, vehicle types, and environmental conditions.

3. Measurements:

– Measure the width of the entrance or exit where the chain will be installed to ensure you select the appropriate length of the chain.

4. Anchor Points:

– Identify and prepare sturdy anchor points on either side of the entrance or exit to mount the parking chain. Ensure the anchors are securely attached to the ground or wall to withstand the force applied by the chain.

5. Chain Height:

– Position the parking chain at an appropriate height to allow vehicles to pass underneath without obstruction. Ensure there is sufficient clearance for all types of vehicles that will use the parking facility.

6. Installation:

– Install the parking chain according to the manufacturer’s instructions. Use appropriate tools and equipment to ensure a secure and stable installation.

7. Secure Attachment:

– Double-check that the chain is securely attached to the anchor points, and there is no excessive slack or sagging.

8. Signage:

– Install clear and visible signage to inform users about the presence of the parking chain and how to operate it.

9. Testing:

– Test the parking chain’s movement to ensure it raises and lowers smoothly without any obstructions or jams.

10. Maintenance:

– Develop a maintenance schedule and conduct regular inspections to ensure the parking chain remains in good working condition. Lubricate the chain and address any issues promptly.

By following these installation steps and providing regular maintenance, you can ensure the car parking chain functions correctly and securely, providing efficient access control and enhancing the overall safety and convenience of your parking facility.

car parking chain

What are the safety features of car parking chains to prevent accidents and injuries?

Car parking chains are designed with several safety features to prevent accidents and injuries. These features ensure that the chains operate safely and effectively, protecting both vehicles and users. Some common safety features include:

1. Reflective Elements: Many parking chains have reflective coatings or materials to enhance visibility, especially during low-light conditions. This makes the chains more noticeable to drivers and pedestrians, reducing the risk of collisions.

2. Smooth and Even Surface: Parking chains are manufactured with smooth and even surfaces to prevent any sharp edges or protrusions that could cause injuries or damage to vehicles.

3. Clear Signage: Proper signage is placed near the parking chains to inform users of their presence and how to operate them. This helps prevent confusion and misuse.

4. Low Friction: Chains are often lubricated to reduce friction and ensure smooth movement, minimizing the risk of accidents caused by chain jams or abrupt stops.

5. Emergency Access: Parking chains are designed with emergency access in mind. In manual systems, there are quick-release mechanisms to allow easy removal of the chain in emergency situations or to facilitate access for emergency vehicles.

6. Height and Clearance: Proper clearance is maintained to prevent chains from interfering with vehicles or causing damage during entry or exit.

7. Secure Mounting: Parking chains are securely mounted to prevent accidental detachment or falling, especially in retractable systems.

8. Load Capacity: For automatic systems, parking chains are designed to handle the weight of vehicles passing through, ensuring they can safely support the load.

9. Regular Maintenance: Regular inspections and maintenance help identify any safety issues and address them promptly, ensuring the chains remain safe for use.

10. Training and Education: Parking attendants and users should receive proper training on how to operate the parking chains safely and effectively.

By incorporating these safety features and promoting responsible use, car parking chains can effectively prevent accidents and injuries, providing a secure and controlled parking environment for all users.

car parking chain

How do car parking chains enhance security and prevent unauthorized access to parking areas?

Car parking chains serve as a physical barrier and play a crucial role in enhancing security and preventing unauthorized access to parking areas. Here’s how they achieve this:

1. Physical Deterrent: The presence of a chain across the entrance acts as a visual deterrent, dissuading unauthorized vehicles from attempting to enter the parking area. It signals that the area is controlled and restricted to authorized personnel only.

2. Controlled Access: Parking chains are manually operated or integrated with electronic access control systems. Only authorized users with the appropriate credentials, such as a key, keycard, or remote control, can raise or lower the chain to gain access.

3. Preventing Tailgating: In manual systems, parking attendants can visually verify each vehicle’s authorization before allowing entry. In automatic systems, the access control technology ensures that only one vehicle is allowed to pass at a time, preventing unauthorized vehicles from tailgating behind an authorized one.

4. Flexible Access Control: Some parking chains can be integrated with electronic access control systems that allow for fine-grained control. This includes time-based access permissions or specific access rights for different user groups, enhancing security measures.

5. Cost-Effective Security: Compared to more advanced access control systems like automated gates or barrier arms, parking chains offer a cost-effective security solution, making them suitable for various parking facilities.

6. Reducing Vehicle Theft: By restricting access to only authorized vehicles, parking chains reduce the risk of theft or unauthorized use of parked vehicles.

7. Minimizing Traffic Violations: Parking chains prevent unauthorized parking, reducing instances of illegal parking or traffic violations within the parking area.

8. Additional Security Measures: Parking chains can be complemented with other security features like surveillance cameras, lighting, and manned security personnel, creating a comprehensive security strategy for the parking facility.

In summary, car parking chains provide a simple yet effective method to control access, enhance security, and prevent unauthorized entry into parking areas, ensuring a safer and more controlled environment for vehicles and users.

China supplier Al Leaf Chain Long Pitch Flat Top Table Car Parking Drag Sharp Al Bl EL for Mine Machinery Grain Durable Machine Supplier Forging Stainless Steel Leaf Chains  China supplier Al Leaf Chain Long Pitch Flat Top Table Car Parking Drag Sharp Al Bl EL for Mine Machinery Grain Durable Machine Supplier Forging Stainless Steel Leaf Chains
editor by CX 2023-09-06

China Professional Bl Leaf Chain Long Pitch Flat Top Table Car Parking Drag Sharp Al Bl EL for Mine Machinery Grain Durable Machine Supplier Forging Stainless Steel Leaf Chains

Product Description

BL Leaf Chain Long Pitch Flat Top Table Car Parking Drag Sharp AL BL EL for Mine Machinery Grain Durable Machine Supplier Forging Stainless Steel Leaf Chains

Application of Leaf Chains

Leaf chains are a type of chain that is used in a variety of applications, including:

  • Forklifts: Leaf chains are used in the masts of forklifts to lift and lower loads.
  • Cranes: Leaf chains are used in the booms of cranes to lift and lower loads.
  • Hoists: Leaf chains are used in hoists to lift and lower loads.
  • Machine tools: Leaf chains are used in machine tools to move parts and tools.
  • Conveyors: Leaf chains are used in conveyors to move materials.
  • Elevators: Leaf chains are used in elevators to move people and cargo.

Leaf chains are a durable and strong type of chain that is well-suited for applications that require a lot of lifting and moving. They are also relatively inexpensive, which makes them a cost-effective option for many applications.

Here are some of the advantages of using leaf chains:

  • Durability: Leaf chains are very durable and can withstand a lot of wear and tear.
  • Strength: Leaf chains are very strong and can lift a lot of weight.
  • Inexpensive: Leaf chains are relatively inexpensive, which makes them a cost-effective option for many applications.

Here are some of the disadvantages of using leaf chains:

  • Noise: Leaf chains can be noisy, which can be a problem in some applications.
  • Maintenance: Leaf chains require regular maintenance to keep them in good condition.
  • Limited flexibility: Leaf chains are not as flexible as other types of chains, which can limit their use in some applications.

Overall, leaf chains are a versatile and durable type of chain that can be used in a variety of applications. They are a cost-effective option for many applications, and they offer a number of advantages over other types of chains.

 

Usage: Transmission Chain, Drag Chain, Conveyor Chain, Dedicated Special Chain
Material: Stainless steel
Surface Treatment: Oil Blooming
Feature: Oil Resistant
Chain Size: 1/2"*3/32"
Structure: Roller Chain
Samples:
US$ 9999/Piece
1 Piece(Min.Order)

|
Request Sample

China Professional Bl Leaf Chain Long Pitch Flat Top Table Car Parking Drag Sharp Al Bl EL for Mine Machinery Grain Durable Machine Supplier Forging Stainless Steel Leaf Chains

car parking chain

Can car parking chains be integrated with access control systems, such as key cards or remote controls?

Yes, car parking chains can be integrated with access control systems, allowing for more efficient and convenient vehicle access in parking facilities. Integration with access control systems offers several benefits:

1. Key Cards: Parking chains can be linked to electronic access control systems that use key cards or RFID tags. Authorized users are provided with key cards that they can swipe or tap at the entrance to raise the chain, granting them access to the parking area.

2. Remote Controls: In automated parking chains, remote controls can be used to raise or lower the chains. This is particularly useful for parking attendants or personnel who can remotely manage vehicle access from a central location, reducing the need for physical presence at the entrance.

3. Electronic Passes: Some parking facilities issue electronic passes to authorized users. These passes can be read by sensors at the entrance, automatically raising the chain to allow access without the need for manual operation.

4. License Plate Recognition: Advanced access control systems may use license plate recognition technology to automatically identify and grant access to pre-registered vehicles as they approach the entrance, eliminating the need for physical cards or passes.

5. Time-Based Access: Access control systems can be configured to grant access only during specific times or days. This is particularly useful for parking facilities with restricted access hours or reserved parking spaces for certain users.

6. Enhanced Security: Integration with access control systems improves security by ensuring that only authorized vehicles can enter the parking area, reducing the risk of unauthorized access or parking violations.

7. Efficient Traffic Management: Automated access control systems can process vehicles more quickly, reducing waiting times and traffic congestion at the entrance during peak hours.

By integrating car parking chains with access control systems, parking facilities can enhance security, improve user experience, and efficiently manage vehicle access, making it a popular choice for modern parking facilities.

car parking chain

Are there any regulations or guidelines regarding the installation and use of car parking chains in public and private parking lots?

Yes, the installation and use of car parking chains in public and private parking lots are subject to various regulations and guidelines to ensure safety, accessibility, and compliance with local laws. Here are some common considerations:

1. Building Codes and Zoning Regulations: Before installing parking chains, property owners or operators must comply with local building codes and zoning regulations that dictate the types of barriers and access control mechanisms allowed in specific areas.

2. Accessibility Requirements: Parking facilities, including those using parking chains, must comply with accessibility standards, ensuring that they are accessible to individuals with disabilities. This may involve providing designated accessible parking spaces and ensuring barrier-free access to the facility.

3. Height and Clearance: There are often regulations regarding the height of parking chains to prevent them from interfering with vehicles and causing damage. Adequate clearance must be maintained to ensure smooth entry and exit of vehicles.

4. Visibility and Signage: Proper signage should be displayed to inform users about the parking control system in place and to direct them on how to operate it. Adequate lighting should also be provided to ensure good visibility, especially during low-light conditions.

5. Safety Measures: Safety should be a priority when installing parking chains. This includes ensuring that the chain and its supports are securely anchored to prevent accidents or unauthorized removal.

6. Fire Safety Regulations: In certain areas, there may be specific fire safety regulations that dictate the use of specific materials or the inclusion of fire lanes for emergency vehicle access.

7. Permits and Approvals: Depending on the location and local regulations, obtaining permits and approvals from relevant authorities may be necessary before installing parking chains.

8. Compliance with Industry Standards: Manufacturers and installers of parking chains should ensure that their products meet industry standards for quality, durability, and safety.

It is essential for property owners, facility managers, and operators to familiarize themselves with the specific regulations and guidelines in their area and to work with reputable suppliers and installers to ensure compliance and the safe and effective use of car parking chains.

car parking chain

What is a car parking chain, and how is it used in parking facilities and garages?

A car parking chain is a mechanical barrier used in parking facilities and garages to control vehicle access and prevent unauthorized entry. It consists of a sturdy metal chain suspended across the entrance or exit of a parking area.

The chain is connected to two sturdy posts or walls on either side of the entrance. When lowered, the chain obstructs the passage of vehicles, restricting their entry or exit. Conversely, when lifted, it allows authorized vehicles to pass through.

Parking chains are commonly used in places where a more sophisticated access control system like a gate or a barrier arm may not be necessary. They offer a simple and cost-effective solution for managing vehicle flow.

Typically, parking facility attendants or authorized personnel are responsible for controlling the car parking chain. They manually raise and lower the chain using a key or a specialized lock system.

In some cases, modern parking chains may be automated and integrated with access control systems. This can include keycard readers, electronic passes, or even remote-controlled mechanisms, making it more convenient for authorized users to enter and exit the parking area.

Overall, car parking chains serve as a physical deterrent to prevent unauthorized access and ensure better control over vehicle movement in parking facilities and garages.

“`
China Professional Bl Leaf Chain Long Pitch Flat Top Table Car Parking Drag Sharp Al Bl EL for Mine Machinery Grain Durable Machine Supplier Forging Stainless Steel Leaf Chains  China Professional Bl Leaf Chain Long Pitch Flat Top Table Car Parking Drag Sharp Al Bl EL for Mine Machinery Grain Durable Machine Supplier Forging Stainless Steel Leaf Chains
editor by CX 2023-08-29

China Custom Alloy Steel Conveyor Chain High Strength Agricultural Machinery Baling Machine Chains best roller chain

Product Description

Company Profile

-HangZhou CHOHO Industrial Co., Ltd. was founded in 1999. Has become the leader of chain system technology, the first batch of natioal recognized enterprise technology center,national technology innovation demonstration enterprise,and the first A-share listed company in China’s chain drive industry.The securities code is 003033.
-CHOHO has 4 subsidiaries, including testing technology and international trading companies. has 4 factories in HangZhou, Thailand factory, ZheJiang R&D Center and Tokyo R&D Center. In addition, CHOHO ZHangZhoug Industrial zone is expected to be completed & put into operation next year.
-We specialized in producing all kinds of standard chains and special chains, such as Agricultural Chain, Sprocket, Chain Harrow, Tillage Parts,Rice Harvester Chain, GS38 Chain, Roller Chain, Automobile Chain, Motorcycle Chain Industrial Chain and so on.Our  partners among world top enterprises, such as LOVOL,JOHN DEERE,NEWHOLLAND, CLASS,AGCO,DEUTZFAHR,HONDA, KUBOTA etc.

Production Capacity Equipment

By 2571,CHOHO has more than 2,700 sets of main production equipment and more than 600 sets of high-precision equipment,With the domestic advanced product laboratory and chain production assembly line, CHOHO has strong research and development and testing capabilities for high-end chain products.

Our Advantages

1. Any inquiry you make will be answered professionally within 6~8 hours.
2. Attaches great importance to product quality and approved by many global quality system certification,such as France, Norway, Germany.
3. Focused on Chain since 1999, have rich experience in Production.
4. High-quality workers,First-class advanced equipment,good quality control,advanced technology.
5. Be Good at Custom-Made Products, provide customized services for customers.
6. Participated in the drafting of 24 national and industrial standards such as chains.As of 2571-Mar, CHOHO has 180 authorized patents.
7. With the responsibility of “Providing high quality chain system with the same service life for the global locomotive industry”, have established a strong R&D team.

CHOHO has a natural brand awareness.  As of January 2571, CHOHO has registered the “CHOHO” trademark in more than 60 countries, including the United States, Japan, the United Kingdom, France, Germany, Russia, Spain, Austria, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, Finland, Greece , Hungary, Ireland, Italy, Netherlands, Poland, Portugal, Romania, Ukraine, Sweden, Australia, Algeria, Egypt, Kenya, Morocco, South Korea, Kazakhstan, Mongolia, Syria, Thailand, Pakistan, India, Brazil, Mexico, Colombia, etc. 

Product Advantages

— Ten CoreTechnologies —

1 Chain strengh preload technology 2 Pin CRV treatment technology
3 Plate smoothly punching technology 4 Bush oil hole technology
5 Vacuum Oiled Technology 6 Precision Punching Technology
7 Low frequency fatigue test technology for lange size chain  8 Chain length comparison technology
9 Variation of silence design technology 10 Chain dynamic testingtechnology technologies

Certifications

CHOHO attaches great importance to product quality and approved by many global quality system certification, such as France, Norway, and Germany. Through the establishment of a sophisticated production management process and quality control system, the entire product process control is achieved. With the introduction of advanced production, processing, and testing equipment, CHOHO has internationally leading full-process quality control capabilities to provide customers with high-quality products.

Choho Provide Chain System Solutions for The Global Top 500 and The Enterprises in Various Fields Top 10!

Broad Customer Channels  Market Continues to Develop!
CHOHO has been invited to participate in domestic & international agricultural machinery exhibitions, such as Hannover Messe, Bologna Fair, Canton Fair ,VIV ASIA and so on!

Packaging & Shipping

Packaging Details: Chain+Plastic Bag+Neutral Box+Wooden case+Big Carton+Steel Pallets or Customization

 

FAQ

1. Are you manufacturer or trade Company?
    We are a factory focused on producing and exporting Chain over 23 years,have a professional international trade team.
2. What terms of payment you usually use?
    T/T 30% deposit and 70% against document, L/C at sight.
3. What is your lead time for your goods?
    Normally 30~45 days.Stock can be shipped immediately.
4. Do you attend any Show?
    We attend Hannover show in Germany, EIMA in Italy, CZPT in France, CIAME in China and many other Agricultural machinery shows.
5.Do you offer free samples?
   Yes,we can.or you just bear the shipping cost.
6.Is OEM available?
   Yes, OEM is available. We have professional designers to help you design.
 

Type: Agricultural Machinery Chain
Material: Alloy
Inside Material: Stainless Steel
Feature: Oil-Resistant, Wear-Resistant
Tensile Strength: Strong
Made Style: Manufacture & OEM
Samples:
US$ 5/Meter
1 Meter(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

chain

Different types of drive chains

Drive chains are an important part of many different types of machinery. In this article, we’ll cover a variety of different types, from square links to engineered steel. From there, we’ll discuss different types of chains, such as double and leaf chains. Let’s take a closer look at each one. Once you know what kind of chain you’re looking for, you can make a buying decision. If you’re not sure where to start, read on to learn more about these types of chains, what to look for when choosing, and how to choose the right chain for your specific application.

Engineering Steel Chain

Engineering steel chains are widely used in conveyors, bucket elevators, tensioning links, transmission chains, etc., and have the characteristics of high strength, low friction, and good shock resistance. Early models of these chains were developed for difficult-to-convey applications. They were originally made of all-steel components with flanged rollers made of cast iron. They then increase in size, strength, and spacing in response to the heavy-duty requirements of the industry.
Today, these chains are used in a wide variety of applications, including tough oil drilling operations and forklifts. They offer excellent durability and high power transfer and are available in a variety of materials. They are also ideal for harsh environments such as harsh oil drilling. Their high-strength steel construction means they can handle harsh operating conditions. Their durability is an essential feature of any chain, and CZPT Chains offers a full line of engineered steel chains to meet your exact specifications.
A drive chain made of engineered steel consists of several components: links, pin joints, and sprockets. This allows them to carry heavy loads with minimal stretch. Due to its internal mechanical advantage, the chain runs around the sprockets with almost 100% efficiency. Also, the chain is made of special steel that can withstand certain conditions. They are available in different alloys and grades. If you have any questions, please feel free to contact us.
Roller chain wear is a major problem for conveyor and drive chains. In these cases, the rollers of the chain are more prone to wear than the bushings, so lubrication is essential. Many chains are designed to work with little or no lubrication. Finally, material selection is an important factor in the design of engineered steel conveyor chains. These factors will help ensure that the chain stays in good shape.

Conveyor Chains with Square Links

There are two basic types of conveyor chains. The first is the square chain, commonly used in cranes and hoists. It’s cheap to manufacture but more prone to overload. The second is a chain that uses hook joints or detachable links. These are used for short-term power transmission and have a lubricating effect. Usually, they are made of malleable iron but can be more expensive.
Another type of chain is the removable steel chain. For moderate loads, this is an easy-to-install option. The closed end of the tab should face the sprocket. It is very important to maintain the alignment of the chain relative to the sprockets. The chain should be adjusted to suit the load before installation. It is important to keep the chain lubricated to prolong its life.
Steel chains offer a wider selection of materials and heat treatments. This chain is also more accurate than its counterpart. Steel bushing chains are less expensive but require more frequent lubrication. Steel roller chains are often used for long conveyor centers or high loads. However, lower friction requirements require lower strength chains. This means that chains with square links are a better choice for smaller conveyors. But this style has its drawbacks.
Bushing chains are made of steel and are an excellent alternative for small-scale applications. The pins are silent and prevent tooth damage. Bushed roller chains are also used to a certain extent as conveyor chains. However, the main advantage of the bushing roller chain is that it does not make any noise at all. Bushed roller chains are made of alloy steel and are suitable for very low-speed applications.
chain

double chain

Double-strand roller chain, also known as a double-strand, consists of two rows of single-strand links. It has high impact strength, low weight, and a small form factor. Duplex roller chains are manufactured using CZPT technology, which uses solid rollers to improve sprocket tooth rotation and reduce shock loads. During the manufacturing process, the metal is heat-treated to increase strength and reduce corrosion.
A single chain is designed for a single sprocket, while a double chain consists of two identical chains connected side by side. Double chains are more durable than simple chains because double rollers contain roller bearings, pins, and other components. Simplex drive chains can handle high loads, while duplex drive chains are designed for medium-duty applications.

leaf chain

Blade chains are used in reciprocating devices such as forklifts. They are also used in machine tools for counterweight chains. Leaf chains come in a variety of lengths, usually with female or male ends. Leaf chains can be manufactured in even or odd pitches and are ideal for lifting and balancing. This article will introduce some key uses of leaf chains in drive chains. Additionally, we’ll discuss how they are made and how they behave in applications.
Most drive chains today are made from leaf chains. These chains are designed to increase the strength of the chain. However, they are less expensive than other types of chains. You can also purchase specialized leaf chains for certain applications. CZPT Chain also offers custom leaf chains for your unique needs. Leaf chains are commonly used in forklifts, material handling, and lifting applications. They are usually made from high-quality components. The BL1688 Leaf Chain has 8 x 8 laces and is sold in 10-foot boxes or 25- to 100-foot reels. The leaf chain can be cut as needed.
When selecting a leaf chain for a specific application, consider the minimum tensile strength of the chain. The minimum breaking strength must be high enough to protect the worker or machine, but must also be legal for the type of machine. Most manufacturers publish this minimum strength requirement. To make the most durable leaf chain, design engineers must consider the ISO4347 standard when choosing the right leaf chain. Leaf chain manufacturers tend to exceed international standards by about 20%.
chain

roller chain

Roller chains are made from a variety of materials. Some common materials include steel and stainless steel. The most suitable material depends on cost, environmental conditions, and horsepower transmission design. Chain manufacturers can optimize the material for the intended use. Depending on its size, spacing, and special construction techniques, it can be made lighter or heavier. This is an advantage for applications in noise-sensitive environments. Below are some examples of common uses for roller chains.
The wear of the components in a roller chain is an unavoidable part of its operation. The amount of elongation depends on factors such as lubrication, load, and the frequency of articulation between the pin and bushing. Manufacturing critical wear parts require careful attention to detail. Proper raw materials, manufacturing, and assembly are critical to product performance and longevity. If these components aren’t of high quality, they won’t last as long as the chain should.
The industry recommends measuring the wear elongation of the roller chain to determine when it needs to be replaced. Proper safety procedures must be used to measure chain tension. The tight span of the chain shall be measured by applying the measuring load specified by ANSI. A correctly measured roller chain is safe to use. For motorcycles, the chain is bigger and stronger. Often, toothed belts are replaced by shaft drives because they are less noisy and require less maintenance.
Tensile strength is the most commonly used measurement method for roller chains. This measurement represents the amount of load the chain can withstand before it breaks. Fatigue strength is another measure of durability. Fatigue strength measures how long a roller chain can withstand long-term use before failing. These two measurements are closely related and maybe the same or different. In addition to tensile strength, fatigue strength is a useful factor to consider when purchasing a chain.

China Custom Alloy Steel Conveyor Chain High Strength Agricultural Machinery Baling Machine Chains   best roller chainChina Custom Alloy Steel Conveyor Chain High Strength Agricultural Machinery Baling Machine Chains   best roller chain
editor by CX 2023-04-25

China Hot selling Alloy Steel Conveyor Chain High Strength Agricultural Machinery Baling Machine Chains with high quality

Product Description

Company Profile

-HangZhou CHOHO Industrial Co., Ltd. was founded in 1999. Has become the leader of chain system technology, the first batch of natioal recognized enterprise technology center,national technology innovation demonstration enterprise,and the first A-share listed company in China’s chain drive industry.The securities code is 003033.
-CHOHO has 4 subsidiaries, including testing technology and international trading companies. has 4 factories in HangZhou, Thailand factory, ZheJiang R&D Center and Tokyo R&D Center. In addition, CHOHO ZHangZhoug Industrial zone is expected to be completed & put into operation next year.
-We specialized in producing all kinds of standard chains and special chains, such as Agricultural Chain, Sprocket, Chain Harrow, Tillage Parts,Rice Harvester Chain, GS38 Chain, Roller Chain, Automobile Chain, Motorcycle Chain Industrial Chain and so on.Our  partners among world top enterprises, such as LOVOL,JOHN DEERE,NEWHOLLAND, CLASS,AGCO,DEUTZFAHR,HONDA, KUBOTA etc.

Production Capacity Equipment

By 2571,CHOHO has more than 2,700 sets of main production equipment and more than 600 sets of high-precision equipment,With the domestic advanced product laboratory and chain production assembly line, CHOHO has strong research and development and testing capabilities for high-end chain products.

Our Advantages

1. Any inquiry you make will be answered professionally within 6~8 hours.
2. Attaches great importance to product quality and approved by many global quality system certification,such as France, Norway, Germany.
3. Focused on Chain since 1999, have rich experience in Production.
4. High-quality workers,First-class advanced equipment,good quality control,advanced technology.
5. Be Good at Custom-Made Products, provide customized services for customers.
6. Participated in the drafting of 24 national and industrial standards such as chains.As of 2571-Mar, CHOHO has 180 authorized patents.
7. With the responsibility of “Providing high quality chain system with the same service life for the global locomotive industry”, have established a strong R&D team.

CHOHO has a natural brand awareness.  As of January 2571, CHOHO has registered the “CHOHO” trademark in more than 60 countries, including the United States, Japan, the United Kingdom, France, Germany, Russia, Spain, Austria, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, Finland, Greece , Hungary, Ireland, Italy, Netherlands, Poland, Portugal, Romania, Ukraine, Sweden, Australia, Algeria, Egypt, Kenya, Morocco, South Korea, Kazakhstan, Mongolia, Syria, Thailand, Pakistan, India, Brazil, Mexico, Colombia, etc. 

Product Advantages

— Ten CoreTechnologies —

1 Chain strengh preload technology 2 Pin CRV treatment technology
3 Plate smoothly punching technology 4 Bush oil hole technology
5 Vacuum Oiled Technology 6 Precision Punching Technology
7 Low frequency fatigue test technology for lange size chain  8 Chain length comparison technology
9 Variation of silence design technology 10 Chain dynamic testingtechnology technologies

Certifications

CHOHO attaches great importance to product quality and approved by many global quality system certification, such as France, Norway, and Germany. Through the establishment of a sophisticated production management process and quality control system, the entire product process control is achieved. With the introduction of advanced production, processing, and testing equipment, CHOHO has internationally leading full-process quality control capabilities to provide customers with high-quality products.

Choho Provide Chain System Solutions for The Global Top 500 and The Enterprises in Various Fields Top 10!

Broad Customer Channels  Market Continues to Develop!
CHOHO has been invited to participate in domestic & international agricultural machinery exhibitions, such as Hannover Messe, Bologna Fair, Canton Fair ,VIV ASIA and so on!

Packaging & Shipping

Packaging Details: Chain+Plastic Bag+Neutral Box+Wooden case+Big Carton+Steel Pallets or Customization

 

FAQ

1. Are you manufacturer or trade Company?
    We are a factory focused on producing and exporting Chain over 23 years,have a professional international trade team.
2. What terms of payment you usually use?
    T/T 30% deposit and 70% against document, L/C at sight.
3. What is your lead time for your goods?
    Normally 30~45 days.Stock can be shipped immediately.
4. Do you attend any Show?
    We attend Hannover show in Germany, EIMA in Italy, CZPT in France, CIAME in China and many other Agricultural machinery shows.
5.Do you offer free samples?
   Yes,we can.or you just bear the shipping cost.
6.Is OEM available?
   Yes, OEM is available. We have professional designers to help you design.
 

Type: Agricultural Machinery Chain
Material: Alloy
Inside Material: Stainless Steel
Feature: Oil-Resistant, Wear-Resistant
Tensile Strength: Strong
Made Style: Manufacture & OEM
Samples:
US$ 5/Meter
1 Meter(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

chain

buy drive chain

Buying a drive chain requires a certain understading of its characteristics. This article discusses the different types of chains available, including Silent, Flat-top, and Duplex. By the end of this article, you should have a basic understanding of what each type of chain is for. First, here are some basic rules to keep in mind when shopping for a chain. To find the drive chain that best suits your needs, read on.

roller chain

Choosing the right roller chain for your drive chain depends on several factors. First, you have to determine the motor horsepower and rpm for the small drive sprocket. These values ​​determine the size of the chain and the number of teeth on the drive sprocket. Next, you need to determine the size of the conveyor chain, it can be the horizontal, vertical, or curved radius. Depending on your specific needs, you can also choose between two-strand or three-strand chains.
The roller chain of the drive chain must be properly tensioned. It should also have a proper lubrication system. Chain sag should not exceed two to four percent of the center distance (the distance between the two axles). Also, it shouldn’t make any unusual noises or obvious problems. One of the main reasons for excessive wear is the size of the load. Each chain has a specified maximum working load.
The maximum roller chain load must be less than 1/9 or 6 times the tensile strength of the drive chain. This amount should not exceed this threshold, as exceeding this level will result in chain plate fatigue. To avoid this, you should use a roller chain with a higher number of strands. Also, for high power requirements, a roller chain with a higher number of strands is recommended. One final tip for choosing a drive chain: it should not be used when there is a high risk of corrosion or rusting.
The materials used to manufacture roller chains vary according to the specific application. Common materials include steel and stainless steel. However, stainless steel is used in food processing machinery and other environments that require lubrication. Brass and nylon are also sometimes used. These factors determine the selection of suitable materials for the drive chain. If you are not sure which material to use, you can consult an industry professional. These professionals will help you choose the right chain for the job at hand.

mute chain

The design of the silent transmission chain is as follows: the large chain plates 2 are stacked one on top of the other in the direction of the chain length. The connecting rods are connected by connecting pins 3. The outermost and central guide plates 4 are fastened to the connecting pins 3 by means of rivets. This construction helps minimize friction on the sliding surfaces of the chain. Chainplate 2 of the silent transmission chain is usually made of stainless steel.
The link plates are made of steel and have a rectangular shape with pinholes 41. These guide plates have no teeth but have curved surfaces that guide the silent drive chain on the sprockets. In addition, the rear portion of the guide plate is higher than the portion of the chainplate. This feature improves pitch balance. The present invention is also applicable to silent transmission chains using rockers.
When it comes to chain design, it’s important to remember that silent drive chains are often used in automotive engines, especially timing and cam drives. This type of drive reduces noise and vibration due to its low engagement angle and links engagement with the sprocket. However, these applications are not limited to timing and cam drives; they can also be used for front-wheel power transmission. For example, silent drive chains are designed to resemble those used in NASCAR racing engines.
The design of the silent drive chain is based on the structure of the roller chain. Its components are standardized and manufactured according to pitch. There are single-row and multi-row versions. Quiet chains, also known as inverted tooth chains, are shaped to reduce noise from stretching. It’s also designed to minimize the amount of friction caused by small changes in pitch. Its teeth don’t slide against each other, so the chain is smoother and more durable.

flat top chain

One of the important parts of the flat top chainplate system is the hinge pin, which is used to fix the chainplate and is responsible for the smooth and efficient conveying of the chainplate. There are several types of hinge pins, including single hinge pins and double hinge pins. The single hinge pin is suitable for the chainplate with a small span and small bearing capacity, and the double hinge pin is suitable for the chainplate with a large span and high bearing capacity.
The side bending flat top chain is suitable for conveying large and medium workpiece pallets. They can be made of steel or plastic, each with its own advantages. Both chainplates are designed to convey material smoothly. Side curved flat-top chains can be used on straight conveyors. They have a low coefficient of friction and can transport weights up to 1.2 kg/cm. They can also be combined with HD profiles.
Flat top drive chains are usually made of plastic material and come in two types: tabletop chains and buffer chains. They come in a variety of widths, but the most popular are standard widths, ranging from 3.25 inches to 12 inches. MatTop chains are usually shipped in 10-foot lengths. They come in different styles, but they all have the same basic specs. Tabletop chains are designed for general conveying, while pad chains are used for specific applications. Solid top chains are suitable for conveying bulk materials, while wide pad chains can handle large volumes of fluids and/or solid-solid mixtures.
These chain conveyors can be used to convey, connect or lift small items. This type of chain is especially useful in industries where the product is hot or greasy. The modular design of these chains allows them to be configured in three dimensions, making them suitable for production changes and transitions. They also help reduce slack in the chain. Flat top chains are commonly used in final assembly and mechanical or paint restoration in the automotive industry.

double chain

Besides the roller chain, another type of chain drive is the double drive chain. This type of chain consists of a series of short cylindrical rollers connected together by side links and driven by gears called sprockets. This type of chain is very reliable and only requires a tractor with a high rpm PTO. It is manufactured by CZPT and is available in many different sizes and finishes.

Self-lubricating chain

Self-lubricating drive chains are the ideal solution for applications that do not require the relubrication of conventional chains. This maintenance-free roller chain features fully heat-treated components that increase the chain’s fatigue resistance and strength. It’s sintered alloy bushings are oil-impregnated, reducing the chance of premature wear and elongation. Its self-lubricating properties enhance its durability and work well even in hard-to-reach places.
CZPT self-lubricating roller chains feature preloaded sintered steel bearing pins and oil-impregnated sintered bushings. These chains are drop-in replacements for standard roller chains and run on the same sprockets as standard chains. In addition to being maintenance-free, self-lubricating roller chains are compatible with most existing sprockets and are ideal for demanding applications.
The O-ring chain concept was used to develop self-lubricating systems. It has two or more annular grease storage chambers. A self-lubricating bushing roller chain has an oil reservoir between its pin chain and the roller chainplate. A grease seal between these two plates isolates the moving parts and keeps the joints well lubricated. O-rings are made of special nitrile rubber, whose properties vary by application.
CZPT SLR conveyor chains and CZPT SLR drive chains have rollers on sintered bushings. CZPT SLR chains and SLR conveyor chains are self-lubricating and have a higher working load than standard ANSI chains. They may not be interchangeable with other self-lubricating chains from other manufacturers. Self-lubricating drive chains are the best solution for demanding industrial applications requiring heavy-duty, reliable conveying.

China Hot selling Alloy Steel Conveyor Chain High Strength Agricultural Machinery Baling Machine Chains   with high qualityChina Hot selling Alloy Steel Conveyor Chain High Strength Agricultural Machinery Baling Machine Chains   with high quality
editor by CX 2023-04-23

China wholesaler CA type steel agricultural chain with attachments CA550 for agriculture machine connecting link roller chain

Applicable Industries: Producing Plant, Equipment Mend Shops, Construction performs
Normal or Nonstandard: Standard
Kind: Roller Chain
Substance: ALLOY
Tensile Power: Sturdy
Shade: Normal Or Blue
Pitch: 41.4mm
Software: Equipment Areas
Floor Treatment: First Color
Port: ZheJiang Ports
Packing: Chain+Plastic Bag+ Carton+Wooden Scenario
Payment: T/T
Services: OEM ODM
MOQ: 20pcs
Packaging Details: chain +plastics bag + box +carton+tray
Port: HangZhou port of ZheJiang

Chain NO p b1 G F W h4 d4 k
CA550 41.four 19.eighty one 22 52.5 76.two 12.seven eight.3 10

Far more Merchandise

Q1: Are you maker or trade business?We are chain maker and exporter in excess of ten several years.
Q2:What’s the chain colour?Blue , metal nature coloration ,Black , nickel.
Q3:what’s the manufacturing duration of chain in normally ? 10fT ,5meters prolonged ,any other duration is alright.
Q4.Can I get a sample to verify quality prior to the order ?As normal, we do not suggest to deliver sample due to expense would be high. But we can offer take a look at reviews to check out.
Q5.How prolonged about your supply time ?As common, we can end typical get with sixty~seventy five days right after drawings confirmed.
Q6.What is your bare minimum order amount ?For non common chains, our MOQ is a hundred meters and common chains in stock, about twenty meters is offered.
Q7.What terms of payment you usually use?T/T 30% deposit and 70% in opposition to doc, Western Union, L/C at sight.

Advantages and disadvantages of roller chains

If you need to lift heavy objects, you should know how to use a roller chain. Its simple design and simplicity make it ideal for a wide range of applications. This article will discuss the advantages and different types of applications of roller chains. After reading this article, you will be able to choose the type of roller chain that best suits your specific needs. In the next section, we’ll discuss how to deal with it.

Put on

How to measure the wear of a roller chain? There are several methods available, but the most accurate is to use a wear gauge kit. The CZPT Chain Wear Indicator Kit measures chain elongation. Compliant with ANSI and British Standards, this tool is critical to the industry chain and can help you determine when replacement is required. Improper chain maintenance can cause equipment to slip or perform poorly, resulting in unnecessary downtime.
In addition to measuring the elongation of the roller chain, it is also possible to measure the pitch of the rollers. This measurement represents the ANSI #80 standard for roller chains. Vernier calipers can also be used to measure the pitch of chains. This tool is very useful and also acts as a bottle opener. You can even use it as a wear gauge. This way, you can determine if the roller chain needs to be replaced.
The wear resistance of a roller chain can extend its life by 10% or more. However, proper lubrication and general maintenance are essential to ensure the longest lifespan of your chain. The manufacturing process of a roller chain assembly also plays a crucial role in determining its service life. For longer life, you might consider purchasing a heavy-duty series roller chain with thicker side plates and longer pins. If you need greater working load capacity, you can also consider heavy-duty chains.
High-quality components are critical to the longevity of the roller chain. High-quality roller chain components require precise heat treatment processes. The use of proprietary steel allows the company to manufacture more durable drums. The pins are manufactured to tight tolerances and then undergo a centerless grinding process. This process removes any surface defects, resulting in a mirror finish on the pins. The uniformity of this surface finish also ensures that the load is evenly distributed on the pins, extending the life of the chain.
chain

Material

Among the materials used in roller chains, carbon steel and alloy steel are the most common. However, stainless steel is used in food processing equipment and applications that require lubrication. Other materials used for roller chains include nylon and brass. For more information, see the USACE Material Specification Sheet for more information. You can also find information about the performance of a roller chain by its design. But before choosing one of these materials, consider its pros and cons.
Stainless steel is an excellent choice for roller chains. It is corrosion-resistant and can operate in extreme temperatures without cracking. Stainless steel is a non-magnetic material that can operate in a temperature range of -200 degrees to +700 degrees Fahrenheit. In addition to its corrosion-resistant properties, stainless steel can withstand a variety of environments and can be used in heavy-duty applications. The MEGA series is the strongest stainless steel roller chain in the world.

Application

As the name suggests, a roller chain has 5 basic components: pins, bushings, rollers, and pin chainplates. These components are precision engineered to ensure optimum performance and durability. Typical applications include drives and conveyor belts. The various components of the roller chain can be customized to specific needs. Read on to learn more about how these parts work together. This article presents the advantages and disadvantages of different types of roller chains and discusses their applications.
A roller chain is a form of chain drive consisting of short cylindrical rollers connected together by side links and gears called sprockets. While these devices are simple, they have some limitations. In most cases, sprockets must be designed with a maximum tensile load on one tooth to prevent premature chain failure. Therefore, these chains are less efficient than belt drives with higher inertia.
Roller chains are usually made of carbon or alloy steel, although stainless steel is often used where food processing machinery and lubrication are problematic. Sometimes, nylon and brass are used. The maximum running speed of the roller chain is important for some applications, but it also provides economic benefits for users and manufacturers. The maximum running speed of a roller chain is usually governed by a wear limit, which can vary by application.
The global roller chain market is expected to grow at a CAGR of over 5.4% over the next six years. The research report covers the competitive landscape and key factors influencing the market. The report also analyzes the growth potential, product utilization, and pricing models of key vendors. It also covers the SWOT analysis of the key players in the industry. The study provides a comprehensive market analysis of all these factors and more. It also highlights key players and their strategies and identifies the fastest growing regions for their products and services.

Maintain

Because rollers are exposed to a variety of environments, including snow, rain, and muddy roads, regular maintenance is required to prevent damage. Because they must encounter these elements frequently, frequent inspections are important to prevent rust and other damage. Also, avoid pouring acidic or alkaline cleaning products on the roller chain. Instead, use hot water with hand sanitizer or a disposable toothbrush to clean the rollers. Washing the chain directly with water has little effect.
For small rollers, the workload during the break-in period should not be too large, otherwise, it will cause overheating. The small drum should also be inspected frequently for any unusual appearance, which may indicate that the system is not functioning properly. In this case, the operation must be suspended. Failure to do so could result in serious injury or a facility fire. Additionally, a properly lubricated roller chain is essential to ensure long-term performance.
The surface of the roller is often rusted and scratched. Over time, these little scars can spread to the drive, damaging it. Also, the chain may not be properly spaced and timed. Therefore, it is very important to check regularly to ensure that the chain is in top condition. When the chain wears to 3% or more, the entire roller chain needs to be replaced. Failure to do so may damage the drive, the roller sprocket, or the entire chain.
Given the chain’s processing environment, lubrication is critical to its performance. If the chain is lubricated, it must be re-lubricated frequently. However, lubricated roller chains are susceptible to contamination, especially in the biomass industry. In these environments, airborne organic particles and debris from the biomass industry can contaminate lubricated roller chains. This is why maintenance is important for lubricating roller chains.
chain

Preloading

The benefits of preloading roller chains are well documented. In general, preloading eliminates the initial elongation of the roller chain, increasing its service life. Preloading is an effective way to achieve this, and a preloading chart can help illustrate the benefits of this process. Chains with little or no preload will stretch significantly during drive start, while chains will stretch rapidly as the surface hardness of the wear parts increases. Additionally, a properly preloaded chain has little or no elongation during the initial start-up of the drive, extending wear life.
Premium manufacturers apply the preload concept during their production phase, aligning all major components at the same time. This approach helps eliminate elongation issues that lead to rapid degradation of the roller chain. If this is not checked, the chain drive will stretch immediately over time. To avoid these problems, it is important to purchase a high-quality preloaded roller chain from a reputable source.
The heat treatment process is an effective way to prevent excessive wear of the roller chain. Heat treatment is a complex process that takes place in a factory during manufacturing. This process helps the rollers maintain high hardness and depth, preventing breakage. When buying a roller chain, make sure that the chain is heat treated and that the chain is manufactured to a high degree of precision. It also ensures that the product can be used for a long time.
In addition to performance benefits, preloading can also reduce initial elongation. A preloaded roller chain will exhibit near linear elongation, whereas a non-preloaded chain will experience rapid elongation. Therefore, they will reach the recommended 3% elongation earlier. Make sure the chain is properly lubricated. Also, consider how the chain is arranged. This is critical for optimal longevity.

China wholesaler CA type steel agricultural chain with attachments CA550 for agriculture machine     connecting link roller chainChina wholesaler CA type steel agricultural chain with attachments CA550 for agriculture machine     connecting link roller chain
editor by czh