Marine Planetary CZPT Windlass Small Measurement
1.CZPTly, the set up of the windlass must make certain that the three factors of the anchor chain major out (the anchor chain barrel, the chain controller and the sprocket) are in one particular line
two.Perform load: refers to the rigidity calculated at the outlet of the anchor chain wheel.
three.Overload rigidity: the short time overload potential essential by the windlass.
4.Typical pace: the speed at which two anchor chains are recovered when 3 are in the h2o and are freely suspended.
5.Help load: refers to the greatest static load on the anchor chain that the anchor chain wheel brake need to be capable to bear.
| Model | Dian of chain wheel(mm) | Working load(kn) | Overhead pulling pressure(kn) | Keeping load(kn) | Nominal pace(m/min) | Warping load(kn) | |||
| AM2 | AM3 | AM2 | AM3 | AM2 | AM3 | ||||
| seventeen.5 | 17.five | 13 | 14.six | 19.5 | 21.9 | 80 | a hundred and fifteen | 9 | 8 |
| 19 | 19 | fifteen.three | 17.2 | 23. | twenty five.8 | ninety five | one hundred thirty five | nine | 10 |
| twenty | 20 | 17.nine | 20. | 26.9 | thirty. | one hundred ten | 157 | nine | 10 |
| 22 | 22 | twenty.6 | 23. | 30.nine | 34.5 | 126 | one hundred eighty | 9 | 15 |
| 24 | 24 | 24.5 | 24.4 | 36.8 | 41.one | 149 | 214 | nine | 20 |
| 26 | 26 | 28.seven | 32.one | 43.one | forty eight.2 | a hundred seventy five | a hundred and fifty | nine | twenty |
| 28 | 28 | 33.three | 37.two | fifty. | fifty five.eight | 202 | 289 | 9 | 20 |
| 30 | 30 | 38.three | 42.8 | fifty seven.5 | 64.two | 231 | 330 | 9 | 30 |
| 32 | 32 | forty three.5 | forty eight.6 | sixty five.three | seventy two.9 | 261 | 374 | nine | thirty |
| 34 | 34 | 49.one | fifty four.9 | seventy three.7 | 82.four | 294 | 421 | 9 | thirty |
| 36 | 36 | fifty five.1 | sixty one.six | 82.7 | 92.4 | 329 | 470 | nine | 30 |
| 38 | 38 | 61.4 | 68.nine | 92.1 | 103.4 | 365 | 522 | 9 | forty |
| forty | forty | sixty eight | seventy six. | 102. | 114. | 402 | 576 | 9 | 40 |
The windlass is a mechanical gadget for throwing, lifting and retracting the anchor. It is positioned at the bow of the ship.The roller on both sides of the sprocket wheel can be utilised for twisting and retracting ropes.Windlass can be divided into human windlass, electric windlass and electric hydraulic windlass according to different electrical power.At existing, the Marine windlass is mainly electric hydraulic windlass and electric powered windlass
four.In purchase to ship you a most suitble model we need to have affirm the subsequent information.
1), what is the winch pulling capability?
two),what is the winch wire rope length?
3),what is the wire rope diameters?
four)You require the winch with one or double drum?and per drum pulling potential?
5),what is the winch operating surroundings?
6),Are you require power pack?
if you have inquiry, pls make contact with me freely
