Product Description
| Chain No. |
Assembly |
Pitch A |
Pin Dia. D |
Plate | Overall Width | Maximum Allowable Load (lbs) |
Average Ultimate Strength (lbs) |
Average Weight Per Foot (lbs) Riveted |
||
| Height H |
Thickness T |
E | ||||||||
| BL Series | ||||||||||
| BL-834 | 3X4 | 1 | 0.375 | 0.948 | 0.156 | 1.28 | 4,600 | 35,100 | 2.85 | |
LEAF CHAINS
Leaf chains are known for their durability and high tensile strength. They are primarily used in lift device applications such as forklifts, lift trucks, and lift masts. These hard working chains handle the lifting and balancing of heavy loads with the use of sheaves instead of sprockets for guidance. One of the primary differences with leaf chain compared to roller chain is that it only consists of a series of stacked plates and pins, providing superior lifting strength.
Leaf chains are built of interlaced plates held together by rivet pins. They are built with the same high degree of precision as our roller chains. HKK Leaf chains are used for applications that require strong flexible linkage for transmitting motion or lift. Specially selected steel and unique heat treatment assures high strength and durability. The first number or numbers in leaf chains identifies the chain pitch, the last 2 numbers identify the chain’s lacing. New applications should use BL series leaf chains.
Leaf Chain is the most simple of steel chains, consisting only of link plates and pins. This chain generally has greater tensile strength than roller chains and runs over sheaves rather than sprockets. They are suitable for hanging, balancing or motion transmitting applications. Leaf chains are often used as counterweight chains for machine tools, elevator and oven doors, fork lift truck masts, spinning frames and similar lifting or balancing applications.
Plates are connected by pins and hold the tension loaded on the chain.
LEAF CHAINS STRENGHTH
Leaf chains are famous with engineers for their strength in materials handling, such as with forklifts, lift trucks, lift masts, straddle carriers, and other major works of civil engineering. Their long service life, high fatigue strength and maximum wear resistance make them the ideal solution for long-term projects that need to be both reliable and incredibly strong. The compact design of leaf chains allows them to fit well within a variety of systems. The key parts of a leaf chain include:
Link Plates: Close control of the plate dimensions allows for high fatigue strength and long service life.
Pins: The pins pass through the plates and are subject to shearing forces, while the plates articulate on the pins through rotation over the sheave.
AL SERIES TYPE AND BL SERIES TYPE
The American National Standards Institute (ANSI) determines consensus standards for a wide range of products and processes in the U.S. that are also adopted worldwide. This regulatory body provides the chain industry with specifics around size and strength that govern the manufacture of different types of chains, including leaf chains and roller chains. While these standards do not often change, AL Series was removed from ANSI Standard in 1975. The newer edition of the standard is BL Series, which replaced the AL Series. AL and BL Series are dimensionally different. BL Series has a higher tensile strength than AL Series and is more commonly used today. However, older machinery may still use the AL Series of leaf chain, which is still offered by HangZhou Star Machine Technology Co., Ltd. in a variety of different sizes.
When you need a leaf chain to keep your project in balance, contact the experienced professionals at HangZhou Star Machine Technology Co., Ltd. If you’re not sure exactly what type or size of chain that you need, we have decades of experience working with customers to provide the ideal chain or sprocket to keep you moving. We have a full line of Leaf AL Series Chains as well as Leaf BL Series Chains.
Plate configuration and thickness are the same as ANSI G8 roller chain. Pin diameter is almost the same as ANSI G8 roller chain.
BL Series leaf chains consist of link plates which are thicker and larger in contour than the AL Series link plates of the same pitch. The link plateave the same thickness as the link plates of the next larger pitch size in ANSI G8 roller chains. The pins have the same diameter as those of ANSI G8 roller chains of the next larger pitch.
For Applications That Required Strong Flexible Linkage | Ideal for Lifting Applications | Specially Selected Steel | Unique Heat Treatment Process
WHY CHOOSE US
1. Reliable Quality Assurance System
2. Cutting-Edge Computer-Controlled CNC Machines
3. Bespoke Solutions from Highly Experienced Specialists
4. Customization and OEM Available for Specific Application
5. Extensive Inventory of Spare Parts and Accessories
6. Well-Developed CZPT Marketing Network
7. Efficient After-Sale Service System
The 219 sets of advanced automatic production equipment provide guarantees for high product quality. The 167 engineers and technicians with senior professional titles can design and develop products to meet the exact demands of customers, and OEM customizations are also available with us. Our sound global service network can provide customers with timely after-sales technical services.
We are not just a manufacturer and supplier, but also an industry consultant. We work pro-actively with you to offer expert advice and product recommendations in order to end up with a most cost effective product available for your specific application. The clients we serve CZPT range from end users to distributors and OEMs. Our OEM replacements can be substituted wherever necessary and suitable for both repair and new assemblies.
| Standard or Nonstandard: | Standard |
|---|---|
| Application: | Textile Machinery, Garment Machinery, Conveyer Equipment, Packaging Machinery, Electric Cars, Motorcycle, Food Machinery, Marine, Mining Equipment, Agricultural Machinery, Car |
| Surface Treatment: | Baking Paint, Polishing |
| Structure: | Tooth Chain, Leaf Chain |
| Material: | 40mn, 45mn, Alloy |
| Type: | Cranked Link Chain, Short Pitch Chain |
| Samples: |
US$ 10/Meter
1 Meter(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
How do I install a car parking chain correctly and securely to ensure its proper functioning?
Proper installation is crucial to ensure the car parking chain operates correctly and securely. Follow these steps for a successful installation:
1. Site Assessment:
– Conduct a thorough site assessment to determine the best location for the parking chain. Consider factors such as traffic flow, visibility, and clearance requirements.
2. Choose the Right Chain:
– Select a parking chain that suits the specific needs of your parking facility, considering factors such as traffic volume, vehicle types, and environmental conditions.
3. Measurements:
– Measure the width of the entrance or exit where the chain will be installed to ensure you select the appropriate length of the chain.
4. Anchor Points:
– Identify and prepare sturdy anchor points on either side of the entrance or exit to mount the parking chain. Ensure the anchors are securely attached to the ground or wall to withstand the force applied by the chain.
5. Chain Height:
– Position the parking chain at an appropriate height to allow vehicles to pass underneath without obstruction. Ensure there is sufficient clearance for all types of vehicles that will use the parking facility.
6. Installation:
– Install the parking chain according to the manufacturer’s instructions. Use appropriate tools and equipment to ensure a secure and stable installation.
7. Secure Attachment:
– Double-check that the chain is securely attached to the anchor points, and there is no excessive slack or sagging.
8. Signage:
– Install clear and visible signage to inform users about the presence of the parking chain and how to operate it.
9. Testing:
– Test the parking chain’s movement to ensure it raises and lowers smoothly without any obstructions or jams.
10. Maintenance:
– Develop a maintenance schedule and conduct regular inspections to ensure the parking chain remains in good working condition. Lubricate the chain and address any issues promptly.
By following these installation steps and providing regular maintenance, you can ensure the car parking chain functions correctly and securely, providing efficient access control and enhancing the overall safety and convenience of your parking facility.
What materials are commonly used to manufacture car parking chains, and how do they affect durability and performance?
Car parking chains are typically manufactured using various materials, and the choice of material can significantly impact the durability and performance of the chains. The most common materials used include:
1. Steel: Steel is the most prevalent material for parking chains due to its high strength and durability. It can withstand heavy loads and resist wear and tear, making it suitable for both indoor and outdoor use. Steel chains are often coated or galvanized to enhance their corrosion resistance and extend their lifespan.
2. Stainless Steel: Stainless steel chains offer excellent corrosion resistance, making them ideal for parking areas in coastal or high-humidity environments. They are less prone to rust and maintain their appearance over time.
3. Plastic or PVC: Plastic or PVC chains are lightweight and cost-effective alternatives to metal chains. While they may not be as strong as steel, they are suitable for low-traffic areas and temporary parking setups. However, they may be less durable and require more frequent replacement compared to metal chains.
4. Brass: Brass chains are sometimes used for their aesthetic appeal, as they have a distinct gold-like appearance. However, they are not as commonly used as steel or stainless steel due to their higher cost and lower strength.
5. Aluminum: Aluminum chains are lightweight and resistant to corrosion, making them suitable for outdoor use. However, they are not as strong as steel or stainless steel, and their use is often limited to less demanding applications.
The choice of material depends on several factors, including the intended usage, environmental conditions, budget constraints, and aesthetic preferences. Steel and stainless steel are the most popular choices for parking chains as they offer a good balance of strength, durability, and resistance to various weather conditions. Plastic or PVC chains are more suitable for temporary setups or situations where cost is a primary concern.
Regular maintenance and proper care, regardless of the material used, will also contribute to the longevity and performance of car parking chains. Periodic inspections, lubrication, and prompt repair of any damage are essential to ensure the chains function effectively and provide reliable access control in parking facilities.
How do car parking chains enhance security and prevent unauthorized access to parking areas?
Car parking chains serve as a physical barrier and play a crucial role in enhancing security and preventing unauthorized access to parking areas. Here’s how they achieve this:
1. Physical Deterrent: The presence of a chain across the entrance acts as a visual deterrent, dissuading unauthorized vehicles from attempting to enter the parking area. It signals that the area is controlled and restricted to authorized personnel only.
2. Controlled Access: Parking chains are manually operated or integrated with electronic access control systems. Only authorized users with the appropriate credentials, such as a key, keycard, or remote control, can raise or lower the chain to gain access.
3. Preventing Tailgating: In manual systems, parking attendants can visually verify each vehicle’s authorization before allowing entry. In automatic systems, the access control technology ensures that only one vehicle is allowed to pass at a time, preventing unauthorized vehicles from tailgating behind an authorized one.
4. Flexible Access Control: Some parking chains can be integrated with electronic access control systems that allow for fine-grained control. This includes time-based access permissions or specific access rights for different user groups, enhancing security measures.
5. Cost-Effective Security: Compared to more advanced access control systems like automated gates or barrier arms, parking chains offer a cost-effective security solution, making them suitable for various parking facilities.
6. Reducing Vehicle Theft: By restricting access to only authorized vehicles, parking chains reduce the risk of theft or unauthorized use of parked vehicles.
7. Minimizing Traffic Violations: Parking chains prevent unauthorized parking, reducing instances of illegal parking or traffic violations within the parking area.
8. Additional Security Measures: Parking chains can be complemented with other security features like surveillance cameras, lighting, and manned security personnel, creating a comprehensive security strategy for the parking facility.
In summary, car parking chains provide a simple yet effective method to control access, enhance security, and prevent unauthorized entry into parking areas, ensuring a safer and more controlled environment for vehicles and users.
editor by CX 2023-09-12