Product Description
ROLLER CHAIN
Roller chain or bush roller chain is the type of chain drive most commonly used for transmission of mechanical power on many kinds of domestic, industrial and agricultural machinery, including conveyors, wire- and tube-drawing machines, printing presses, cars, motorcycles, and bicycles. It consists of a series of short cylindrical rollers held together by side links. It is driven by a toothed wheel called a sprocket. It is a simple, reliable, and efficient means of power transmission.
CONSTRUCTION OF THE CHAIN
Two different sizes of roller chain, showing construction.
There are 2 types of links alternating in the bush roller chain. The first type is inner links, having 2 inner plates held together by 2 sleeves or bushings CHINAMFG which rotate 2 rollers. Inner links alternate with the second type, the outer links, consisting of 2 outer plates held together by pins passing through the bushings of the inner links. The “bushingless” roller chain is similar in operation though not in construction; instead of separate bushings or sleeves holding the inner plates together, the plate has a tube stamped into it protruding from the hole which serves the same purpose. This has the advantage of removing 1 step in assembly of the chain.
The roller chain design reduces friction compared to simpler designs, resulting in higher efficiency and less wear. The original power transmission chain varieties lacked rollers and bushings, with both the inner and outer plates held by pins which directly contacted the sprocket teeth; however this configuration exhibited extremely rapid wear of both the sprocket teeth, and the plates where they pivoted on the pins. This problem was partially solved by the development of bushed chains, with the pins holding the outer plates passing through bushings or sleeves connecting the inner plates. This distributed the wear over a greater area; however the teeth of the sprockets still wore more rapidly than is desirable, from the sliding friction against the bushings. The addition of rollers surrounding the bushing sleeves of the chain and provided rolling contact with the teeth of the sprockets resulting in excellent resistance to wear of both sprockets and chain as well. There is even very low friction, as long as the chain is sufficiently lubricated. Continuous, clean, lubrication of roller chains is of primary importance for efficient operation as well as correct tensioning.
LUBRICATION
Many driving chains (for example, in factory equipment, or driving a camshaft inside an internal combustion engine) operate in clean environments, and thus the wearing surfaces (that is, the pins and bushings) are safe from precipitation and airborne grit, many even in a sealed environment such as an oil bath. Some roller chains are designed to have o-rings built into the space between the outside link plate and the inside roller link plates. Chain manufacturers began to include this feature in 1971 after the application was invented by Joseph Montano while working for Whitney Chain of Hartford, Connecticut. O-rings were included as a way to improve lubrication to the links of power transmission chains, a service that is vitally important to extending their working life. These rubber fixtures form a barrier that holds factory applied lubricating grease inside the pin and bushing wear areas. Further, the rubber o-rings prevent dirt and other contaminants from entering inside the chain linkages, where such particles would otherwise cause significant wear.[citation needed]
There are also many chains that have to operate in dirty conditions, and for size or operational reasons cannot be sealed. Examples include chains on farm equipment, bicycles, and chain saws. These chains will necessarily have relatively high rates of wear, particularly when the operators are prepared to accept more friction, less efficiency, more noise and more frequent replacement as they neglect lubrication and adjustment.
Many oil-based lubricants attract dirt and other particles, eventually forming an CHINAMFG paste that will compound wear on chains. This problem can be circumvented by use of a “dry” PTFE spray, which forms a solid film after application and repels both particles and moisture.
VARIANTS DESIGN
Layout of a roller chain: 1. Outer plate, 2. Inner plate, 3. Pin, 4. Bushing, 5. Roller
If the chain is not being used for a high wear application (for instance if it is just transmitting motion from a hand-operated lever to a control shaft on a machine, or a sliding door on an oven), then 1 of the simpler types of chain may still be used. Conversely, where extra strength but the smooth drive of a smaller pitch is required, the chain may be “siamesed”; instead of just 2 rows of plates on the outer sides of the chain, there may be 3 (“duplex”), 4 (“triplex”), or more rows of plates running parallel, with bushings and rollers between each adjacent pair, and the same number of rows of teeth running in parallel on the sprockets to match. Timing chains on automotive engines, for example, typically have multiple rows of plates called strands.
Roller chain is made in several sizes, the most common American National Standards Institute (ANSI) standards being 40, 50, 60, and 80. The first digit(s) indicate the pitch of the chain in eighths of an inch, with the last digit being 0 for standard chain, 1 for lightweight chain, and 5 for bushed chain with no rollers. Thus, a chain with half-inch pitch would be a #40 while a #160 sprocket would have teeth spaced 2 inches apart, etc. Metric pitches are expressed in sixteenths of an inch; thus a metric #8 chain (08B-1) would be equivalent to an ANSI #40. Most roller chain is made from plain carbon or alloy steel, but stainless steel is used in food processing machinery or other places where lubrication is a problem, and nylon or brass are occasionally seen for the same reason.
Roller chain is ordinarily hooked up using a master link (also known as a connecting link), which typically has 1 pin held by a horseshoe clip rather than friction fit, allowing it to be inserted or removed with simple tools. Chain with a removable link or pin is also known as cottered chain, which allows the length of the chain to be adjusted. Half links (also known as offsets) are available and are used to increase the length of the chain by a single roller. Riveted roller chain has the master link (also known as a connecting link) “riveted” or mashed on the ends. These pins are made to be durable and are not removable.
USE
An example of 2 ‘ghost’ sprockets tensioning a triplex roller chain system
Roller chains are used in low- to mid-speed drives at around 600 to 800 feet per minute; however, at higher speeds, around 2,000 to 3,000 feet per minute, V-belts are normally used due to wear and noise issues.
A bicycle chain is a form of roller chain. Bicycle chains may have a master link, or may require a chain tool for removal and installation. A similar but larger and thus stronger chain is used on most motorcycles although it is sometimes replaced by either a toothed belt or a shaft drive, which offer lower noise level and fewer maintenance requirements.
The great majority of automobile engines use roller chains to drive the camshaft(s). Very high performance engines often use gear drive, and starting in the early 1960s toothed belts were used by some manufacturers.
Chains are also used in forklifts using hydraulic rams as a pulley to raise and lower the carriage; however, these chains are not considered roller chains, but are classified as lift or leaf chains.
Chainsaw cutting chains superficially resemble roller chains but are more closely related to leaf chains. They are driven by projecting drive links which also serve to locate the chain CHINAMFG the bar.
Sea Harrier FA.2 ZA195 front (cold) vector thrust nozzle – the nozzle is rotated by a chain drive from an air motor
A perhaps unusual use of a pair of motorcycle chains is in the Harrier Jump Jet, where a chain drive from an air motor is used to rotate the movable engine nozzles, allowing them to be pointed downwards for hovering flight, or to the rear for normal CHINAMFG flight, a system known as Thrust vectoring.
WEAR
The effect of wear on a roller chain is to increase the pitch (spacing of the links), causing the chain to grow longer. Note that this is due to wear at the pivoting pins and bushes, not from actual stretching of the metal (as does happen to some flexible steel components such as the hand-brake cable of a motor vehicle).
With modern chains it is unusual for a chain (other than that of a bicycle) to wear until it breaks, since a worn chain leads to the rapid onset of wear on the teeth of the sprockets, with ultimate failure being the loss of all the teeth on the sprocket. The sprockets (in particular the smaller of the two) suffer a grinding motion that puts a characteristic hook shape into the driven face of the teeth. (This effect is made worse by a chain improperly tensioned, but is unavoidable no matter what care is taken). The worn teeth (and chain) no longer provides smooth transmission of power and this may become evident from the noise, the vibration or (in car engines using a timing chain) the variation in ignition timing seen with a timing light. Both sprockets and chain should be replaced in these cases, since a new chain on worn sprockets will not last long. However, in less severe cases it may be possible to save the larger of the 2 sprockets, since it is always the smaller 1 that suffers the most wear. Only in very light-weight applications such as a bicycle, or in extreme cases of improper tension, will the chain normally jump off the sprockets.
The lengthening due to wear of a chain is calculated by the following formula:
M = the length of a number of links measured
S = the number of links measured
P = Pitch
In industry, it is usual to monitor the movement of the chain tensioner (whether manual or automatic) or the exact length of a drive chain (one rule of thumb is to replace a roller chain which has elongated 3% on an adjustable drive or 1.5% on a fixed-center drive). A simpler method, particularly suitable for the cycle or motorcycle user, is to attempt to pull the chain away from the larger of the 2 sprockets, whilst ensuring the chain is taut. Any significant movement (e.g. making it possible to see through a gap) probably indicates a chain worn up to and beyond the limit. Sprocket damage will result if the problem is ignored. Sprocket wear cancels this effect, and may mask chain wear.
CHAIN STRENGTH
The most common measure of roller chain’s strength is tensile strength. Tensile strength represents how much load a chain can withstand under a one-time load before breaking. Just as important as tensile strength is a chain’s fatigue strength. The critical factors in a chain’s fatigue strength is the quality of steel used to manufacture the chain, the heat treatment of the chain components, the quality of the pitch hole fabrication of the linkplates, and the type of shot plus the intensity of shot peen coverage on the linkplates. Other factors can include the thickness of the linkplates and the design (contour) of the linkplates. The rule of thumb for roller chain operating on a continuous drive is for the chain load to not exceed a mere 1/6 or 1/9 of the chain’s tensile strength, depending on the type of master links used (press-fit vs. slip-fit)[citation needed]. Roller chains operating on a continuous drive beyond these thresholds can and typically do fail prematurely via linkplate fatigue failure.
The standard minimum ultimate strength of the ANSI 29.1 steel chain is 12,500 x (pitch, in inches)2. X-ring and O-Ring chains greatly decrease wear by means of internal lubricants, increasing chain life. The internal lubrication is inserted by means of a vacuum when riveting the chain together.
CHAIN STHangZhouRDS
Standards organizations (such as ANSI and ISO) maintain standards for design, dimensions, and interchangeability of transmission chains. For example, the following Table shows data from ANSI standard B29.1-2011 (Precision Power Transmission Roller Chains, Attachments, and Sprockets) developed by the American Society of Mechanical Engineers (ASME). See the references[8][9][10] for additional information.
ASME/ANSI B29.1-2011 Roller Chain Standard SizesSizePitchMaximum Roller DiameterMinimum Ultimate Tensile StrengthMeasuring Load25
| ASME/ANSI B29.1-2011 Roller Chain Standard Sizes | ||||
| Size | Pitch | Maximum Roller Diameter | Minimum Ultimate Tensile Strength | Measuring Load |
|---|---|---|---|---|
| 25 | 0.250 in (6.35 mm) | 0.130 in (3.30 mm) | 780 lb (350 kg) | 18 lb (8.2 kg) |
| 35 | 0.375 in (9.53 mm) | 0.200 in (5.08 mm) | 1,760 lb (800 kg) | 18 lb (8.2 kg) |
| 41 | 0.500 in (12.70 mm) | 0.306 in (7.77 mm) | 1,500 lb (680 kg) | 18 lb (8.2 kg) |
| 40 | 0.500 in (12.70 mm) | 0.312 in (7.92 mm) | 3,125 lb (1,417 kg) | 31 lb (14 kg) |
| 50 | 0.625 in (15.88 mm) | 0.400 in (10.16 mm) | 4,880 lb (2,210 kg) | 49 lb (22 kg) |
| 60 | 0.750 in (19.05 mm) | 0.469 in (11.91 mm) | 7,030 lb (3,190 kg) | 70 lb (32 kg) |
| 80 | 1.000 in (25.40 mm) | 0.625 in (15.88 mm) | 12,500 lb (5,700 kg) | 125 lb (57 kg) |
| 100 | 1.250 in (31.75 mm) | 0.750 in (19.05 mm) | 19,531 lb (8,859 kg) | 195 lb (88 kg) |
| 120 | 1.500 in (38.10 mm) | 0.875 in (22.23 mm) | 28,125 lb (12,757 kg) | 281 lb (127 kg) |
| 140 | 1.750 in (44.45 mm) | 1.000 in (25.40 mm) | 38,280 lb (17,360 kg) | 383 lb (174 kg) |
| 160 | 2.000 in (50.80 mm) | 1.125 in (28.58 mm) | 50,000 lb (23,000 kg) | 500 lb (230 kg) |
| 180 | 2.250 in (57.15 mm) | 1.460 in (37.08 mm) | 63,280 lb (28,700 kg) | 633 lb (287 kg) |
| 200 | 2.500 in (63.50 mm) | 1.562 in (39.67 mm) | 78,175 lb (35,460 kg) | 781 lb (354 kg) |
| 240 | 3.000 in (76.20 mm) | 1.875 in (47.63 mm) | 112,500 lb (51,000 kg) | 1,000 lb (450 kg |
For mnemonic purposes, below is another presentation of key dimensions from the same standard, expressed in fractions of an inch (which was part of the thinking behind the choice of preferred numbers in the ANSI standard):
| Pitch (inches) | Pitch expressed in eighths |
ANSI standard chain number |
Width (inches) |
|---|---|---|---|
| 1⁄4 | 2⁄8 | 25 | 1⁄8 |
| 3⁄8 | 3⁄8 | 35 | 3⁄16 |
| 1⁄2 | 4⁄8 | 41 | 1⁄4 |
| 1⁄2 | 4⁄8 | 40 | 5⁄16 |
| 5⁄8 | 5⁄8 | 50 | 3⁄8 |
| 3⁄4 | 6⁄8 | 60 | 1⁄2 |
| 1 | 8⁄8 | 80 | 5⁄8 |
Notes:
1. The pitch is the distance between roller centers. The width is the distance between the link plates (i.e. slightly more than the roller width to allow for clearance).
2. The right-hand digit of the standard denotes 0 = normal chain, 1 = lightweight chain, 5 = rollerless bushing chain.
3. The left-hand digit denotes the number of eighths of an inch that make up the pitch.
4. An “H” following the standard number denotes heavyweight chain. A hyphenated number following the standard number denotes double-strand (2), triple-strand (3), and so on. Thus 60H-3 denotes number 60 heavyweight triple-strand chain.
A typical bicycle chain (for derailleur gears) uses narrow 1⁄2-inch-pitch chain. The width of the chain is variable, and does not affect the load capacity. The more sprockets at the rear wheel (historically 3-6, nowadays 7-12 sprockets), the narrower the chain. Chains are sold according to the number of speeds they are designed to work with, for example, “10 speed chain”. Hub gear or single speed bicycles use 1/2″ x 1/8″ chains, where 1/8″ refers to the maximum thickness of a sprocket that can be used with the chain.
Typically chains with parallel shaped links have an even number of links, with each narrow link followed by a broad one. Chains built up with a uniform type of link, narrow at 1 and broad at the other end, can be made with an odd number of links, which can be an advantage to adapt to a special chainwheel-distance; on the other side such a chain tends to be not so strong.
Roller chains made using ISO standard are sometimes called as isochains.
WHY CHOOSE US
1. Reliable Quality Assurance System
2. Cutting-Edge Computer-Controlled CNC Machines
3. Bespoke Solutions from Highly Experienced Specialists
4. Customization and OEM Available for Specific Application
5. Extensive Inventory of Spare Parts and Accessories
6. Well-Developed CHINAMFG Marketing Network
7. Efficient After-Sale Service System
The 219 sets of advanced automatic production equipment provide guarantees for high product quality. The 167 engineers and technicians with senior professional titles can design and develop products to meet the exact demands of customers, and OEM customizations are also available with us. Our sound global service network can provide customers with timely after-sales technical services.
We are not just a manufacturer and supplier, but also an industry consultant. We work pro-actively with you to offer expert advice and product recommendations in order to end up with a most cost effective product available for your specific application. The clients we serve CHINAMFG range from end users to distributors and OEMs. Our OEM replacements can be substituted wherever necessary and suitable for both repair and new assemblies.
| Standard or Nonstandard: | Standard |
|---|---|
| Application: | Textile Machinery, Garment Machinery, Conveyer Equipment, Packaging Machinery, Electric Cars, Motorcycle, Food Machinery, Marine, Mining Equipment, Agricultural Machinery, Car, Welding, Loading, Forging |
| Surface Treatment: | Polishing |
| Structure: | Roller Chain |
| Material: | Alloy |
| Type: | Bush Chain |
| Samples: |
US$ 4/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
Are there any smart or automated car parking chain solutions that offer advanced features for improved efficiency?
Yes, there are smart and automated car parking chain solutions available that offer advanced features to enhance efficiency and user experience. These technologies leverage automation, data analytics, and connectivity to provide various benefits:
1. Automated Access Control: Smart parking chains are integrated with electronic access control systems, allowing for automatic detection of authorized vehicles and seamless entry without the need for manual intervention.
2. License Plate Recognition (LPR): Some automated systems use LPR technology to identify vehicles by their license plates, granting access to pre-registered vehicles without the need for physical credentials.
3. Mobile Apps: Smart parking chain solutions may have companion mobile apps that enable users to request access, pay for parking, or receive notifications about parking availability and status.
4. Reservation Systems: Advanced parking chains can be integrated with reservation systems, allowing users to reserve parking spaces in advance, ensuring a spot is available upon arrival.
5. Real-time Data: Smart parking chains can collect and provide real-time data on parking occupancy, traffic patterns, and usage, helping facility managers optimize parking space allocation and make informed decisions.
6. Remote Management: Automated parking chains can be remotely controlled, allowing operators to manage access and monitor the parking facility from a central location.
7. Intelligent Traffic Flow: Some smart systems can analyze traffic flow and optimize entry and exit points to reduce congestion and waiting times.
8. Payment Integration: Smart parking chains can be linked to payment systems, enabling automatic payment processing for users with valid access rights.
9. Integration with Other Technologies: Smart parking chains can be integrated with other technologies, such as parking guidance systems or smart sensors, to create a comprehensive and efficient parking management solution.
10. Enhanced Security: With automated access control and data monitoring, smart parking chain solutions offer enhanced security, reducing the risk of unauthorized access and enhancing user safety.
These advanced features make smart and automated car parking chains an attractive choice for modern parking facilities, offering improved efficiency, convenience, and user satisfaction.
What are the maintenance requirements for car parking chains to ensure smooth operation over time?
Regular maintenance is essential to ensure the smooth operation and longevity of car parking chains. Proper care and attention will help prevent malfunctions and ensure reliable access control in parking facilities. Here are the key maintenance requirements:
1. Cleaning: Regularly clean the parking chains to remove dirt, dust, and debris that can accumulate over time. Clean chains ensure smooth movement and prevent unnecessary wear.
2. Lubrication: Apply appropriate lubrication to the chain links and any moving parts of the chain mechanism. Lubrication reduces friction and wear, allowing the chain to move smoothly.
3. Inspection: Conduct routine inspections of the parking chains to identify any signs of wear, damage, or misalignment. Promptly address any issues to prevent further damage and ensure optimal performance.
4. Adjustments: Check the tension and alignment of the chains regularly. Make necessary adjustments to ensure the chain remains properly tensioned and aligned.
5. Replacement of Worn Parts: If any components of the parking chain show significant wear or damage, replace them promptly to maintain the chain’s integrity and functionality.
6. Weather Protection: Apply protective coatings or paint to steel chains to minimize the impact of weather elements and reduce the risk of corrosion.
7. Addressing Corrosion: For chains made of materials susceptible to corrosion, such as steel, regularly inspect for signs of rust and treat affected areas to prevent further corrosion.
8. Preventing Obstructions: Ensure that the area around the parking chains is clear of any obstacles that could hinder their movement or cause damage.
9. Training and Education: Train parking attendants or personnel responsible for operating the parking chains to handle them properly and conduct basic maintenance tasks.
10. Regular Testing: Periodically test the raising and lowering mechanism of the parking chains to verify that they are functioning correctly.
By adhering to these maintenance requirements, parking facility managers can ensure the smooth operation and reliability of car parking chains, minimizing downtime and ensuring efficient access control for vehicles in the long run.
What are the benefits of using a car parking chain compared to other parking control methods?
Car parking chains offer several advantages over other parking control methods:
- Cost-effectiveness: Parking chains are generally more affordable to install and maintain compared to more complex systems like automated gates or barrier arms.
- Simplicity: They provide a straightforward and easy-to-understand method for controlling vehicle access, requiring minimal training for attendants or personnel.
- Durability: Made from sturdy metal materials, parking chains are robust and can withstand various weather conditions and potential wear and tear.
- Flexibility: Parking chains can be used in various locations, including small parking lots, private driveways, or temporary event spaces, where a permanent gate system may not be feasible.
- Manual and Automated Options: Depending on the setup, parking chains can be operated manually by attendants or automated using electronic access control systems, offering convenience for users.
- Visual Deterrent: The presence of a chain across the entrance acts as a visual deterrent, dissuading unauthorized vehicles from attempting to enter the parking area.
While car parking chains are advantageous in many situations, they may not be suitable for high-traffic areas or locations where more sophisticated access control is necessary for security reasons. In such cases, other methods like automated gates, barrier arms, or ticket-based systems may be more appropriate.
“`
editor by CX 2023-11-20
China Standard Al Ll FL Lh Bl Series Dacromet-Plated Truck Sky Stacker Car Parking Hoisting Machine Conveyor Leaf Chain for Forklift
Product Description
Al Ll FL Lh Bl Series Dacromet-Plated Truck Sky Stacker Car Parking Hoisting Machine Conveyor Leaf Chain for Forklift
Leaf chains are known for their durability and high tensile strength. They are primarily used in lift device applications such as forklifts, lift trucks, and lift masts. These hard working chains handle the lifting and balancing of heavy loads with the use of sheaves instead of sprockets for guidance. One of the primary differences with leaf chain compared to roller chain is that it only consists of a series of stacked plates and pins, providing superior lifting strength.
Leaf chains are built of interlaced plates held together by rivet pins. They are built with the same high degree of precision as our roller chains. HKK Leaf chains are used for applications that require strong flexible linkage for transmitting motion or lift. Specially selected steel and unique heat treatment assures high strength and durability. The first number or numbers in leaf chains identifies the chain pitch, the last 2 numbers identify the chain’s lacing. New applications should use BL series leaf chains.
Leaf Chain is the most simple of steel chains, consisting only of link plates and pins. This chain generally has greater tensile strength than roller chains and runs over sheaves rather than sprockets. They are suitable for hanging, balancing or motion transmitting applications. Leaf chains are often used as counterweight chains for machine tools, elevator and oven doors, fork lift truck masts, spinning frames and similar lifting or balancing applications.
Plates are connected by pins and hold the tension loaded on the chain.
| Item Name | Standard transmission Roller Chains | Model | Series A, Series B |
| Row | Simplex/Duplex/Triplex | Application | Machinery Parts |
| Surface Treatment | Self-color/sand-blasted/shot-peening | Certification | ISO, ANSI, DIN, BS |
| Packing | Packaged in boxes and wooden cases, or packaged in reels and then on pallets. | Port | Any sea port or airport in China |
Related products
| Usage: | Transmission Chain, Drag Chain, Conveyor Chain, Dedicated Special Chain |
|---|---|
| Material: | Stainless steel |
| Surface Treatment: | Oil Blooming |
| Feature: | Oil Resistant |
| Chain Size: | 1/2"*3/32" |
| Structure: | Roller Chain |
| Samples: |
US$ 9999/Piece
1 Piece(Min.Order) | |
|---|
Are there any smart or automated car parking chain solutions that offer advanced features for improved efficiency?
Yes, there are smart and automated car parking chain solutions available that offer advanced features to enhance efficiency and user experience. These technologies leverage automation, data analytics, and connectivity to provide various benefits:
1. Automated Access Control: Smart parking chains are integrated with electronic access control systems, allowing for automatic detection of authorized vehicles and seamless entry without the need for manual intervention.
2. License Plate Recognition (LPR): Some automated systems use LPR technology to identify vehicles by their license plates, granting access to pre-registered vehicles without the need for physical credentials.
3. Mobile Apps: Smart parking chain solutions may have companion mobile apps that enable users to request access, pay for parking, or receive notifications about parking availability and status.
4. Reservation Systems: Advanced parking chains can be integrated with reservation systems, allowing users to reserve parking spaces in advance, ensuring a spot is available upon arrival.
5. Real-time Data: Smart parking chains can collect and provide real-time data on parking occupancy, traffic patterns, and usage, helping facility managers optimize parking space allocation and make informed decisions.
6. Remote Management: Automated parking chains can be remotely controlled, allowing operators to manage access and monitor the parking facility from a central location.
7. Intelligent Traffic Flow: Some smart systems can analyze traffic flow and optimize entry and exit points to reduce congestion and waiting times.
8. Payment Integration: Smart parking chains can be linked to payment systems, enabling automatic payment processing for users with valid access rights.
9. Integration with Other Technologies: Smart parking chains can be integrated with other technologies, such as parking guidance systems or smart sensors, to create a comprehensive and efficient parking management solution.
10. Enhanced Security: With automated access control and data monitoring, smart parking chain solutions offer enhanced security, reducing the risk of unauthorized access and enhancing user safety.
These advanced features make smart and automated car parking chains an attractive choice for modern parking facilities, offering improved efficiency, convenience, and user satisfaction.
Are there any eco-friendly options for car parking chains, such as those made from recycled materials?
Yes, there are eco-friendly options available for car parking chains that promote sustainability and environmental responsibility. These options include:
1. Recycled Materials: Some manufacturers produce parking chains using recycled materials, such as recycled steel or other metals. Using recycled materials reduces the demand for new raw materials and helps minimize the environmental impact of production.
2. Biodegradable or Eco-Friendly Coatings: For parking chains that require protective coatings, eco-friendly options may include biodegradable or environmentally friendly coatings that are less harmful to the environment during application and disposal.
3. Alternative Materials: Apart from traditional metals, eco-friendly parking chains can be made from alternative materials like bamboo or other sustainable resources. These materials have a lower environmental footprint and are renewable.
4. Energy-Efficient Manufacturing: Some manufacturers employ energy-efficient manufacturing processes for parking chains, minimizing energy consumption and reducing greenhouse gas emissions.
5. Longevity and Durability: While not directly related to the materials used, designing parking chains for longevity and durability helps reduce the need for frequent replacements, which, in turn, reduces waste generation.
6. End-of-Life Recycling: Eco-friendly parking chains can be designed with consideration for ease of recycling at the end of their life cycle. This encourages proper disposal and recycling practices, reducing the amount of waste that ends up in landfills.
7. Environmental Certifications: Look for parking chain manufacturers that have obtained environmental certifications or adhere to sustainable production practices.
By choosing eco-friendly car parking chains, parking facility owners and operators can contribute to environmental conservation and sustainability efforts, aligning their operations with green initiatives and reducing their overall ecological impact.
What are the benefits of using a car parking chain compared to other parking control methods?
Car parking chains offer several advantages over other parking control methods:
- Cost-effectiveness: Parking chains are generally more affordable to install and maintain compared to more complex systems like automated gates or barrier arms.
- Simplicity: They provide a straightforward and easy-to-understand method for controlling vehicle access, requiring minimal training for attendants or personnel.
- Durability: Made from sturdy metal materials, parking chains are robust and can withstand various weather conditions and potential wear and tear.
- Flexibility: Parking chains can be used in various locations, including small parking lots, private driveways, or temporary event spaces, where a permanent gate system may not be feasible.
- Manual and Automated Options: Depending on the setup, parking chains can be operated manually by attendants or automated using electronic access control systems, offering convenience for users.
- Visual Deterrent: The presence of a chain across the entrance acts as a visual deterrent, dissuading unauthorized vehicles from attempting to enter the parking area.
While car parking chains are advantageous in many situations, they may not be suitable for high-traffic areas or locations where more sophisticated access control is necessary for security reasons. In such cases, other methods like automated gates, barrier arms, or ticket-based systems may be more appropriate.
“`
editor by CX 2023-11-13
China high quality Al Ll FL Lh Bl Series Dacromet-Plated Truck Sky Stacker Car Parking Hoisting Machine Conveyor Leaf Chain for Forklift
Product Description
Al Ll FL Lh Bl Series Dacromet-Plated Truck Sky Stacker Car Parking Hoisting Machine Conveyor Leaf Chain for Forklift
| ransmission chain (Driving Chain) | Short Pitch Precision Roller Chain (A Series)(1,2,3) | 04C-1 06C-1-2-3 085-1-2-3 08A-1-2-3 10A-1-2-3 12A-1-2-3 16A-1-2-3 20A-1-2-3 24A-1-2-3 28A-1-2-3 32A-1-2-3 40A-1-2-3 48A-1-2-3 |
| 25 35 35-2 35-3 -2 40-3 50 50-2-50-3 60 60-2 60-3 80 80-2 80-3 100 100-2 100-3 120 120-2 120-3 140 140-2 160 160-2 -2 240 | ||
| Short Pitch Precision Roller Chain (B Series)(1,2,3) | 06B-1-2-3 06B-1-2-3 08B-1-2-3 10B-1-2-3 12B-1-2-3 16B-1-2-3 20B-1-2-3 24B-1-2-3 28B-1-2-3 32B-1-2-3 40B-1-2-3 48B-1-2-3 56B-1-2-3 64B-1-2-3 72B-1-2-3 | |
| Heavy Duty Series Roller Chain(1,2) | 08AH-1 10AH-1 12AH-1-2-3 16AH-1-2-3 20AH-1-2-3 24AH-1-2-3 28AH-1-2-3 32AH-1-2-3 40AH-1-2-3 | |
| Side Bow Chain | 40SB 43SB 50SB 60SB 63SB 80SB 08BSB 08BSBY1 10BSB 12BSB C2050SB | |
| Motorcycle Chain | 410 415 415H 420 420H 428 428H 520 520H 525 525H 530 530H 630 630H | |
| Engine Mechanism Chain (Timing Chain) | CL04 | |
| Self-Lubrication Roller Chain | 08BSLR 10BSLR 12BSLR 16BSLR 40SLR 50SLR 60SLR 80SLR | |
| Double Pitch Transmission Chain | 208A 208B 210A 210B 212A 212B 216A 216B 220A 220B | |
| 2040 2050 2060 2080 2100 | ||
| Bush Chain | P15F-B P20-B P25-B P25F1-B P30F2-B P36-B P40-B P45-B P50-B P55-B P60-B P70-B P80-B | |
| Conveyor Chain | Roller Chain With Straight Side Plates (A Series) | C08A-1-2-3 C10A-1-2-3 C12-1-2-3 C24A-1-2-3 C32A-1-2-3 |
| C35 C40-1-2-3 C50-1-2-3 C80-1-2-3 C100-1-2-3 C120-1-2-3 C140-1-2-3 C160-1-2-3 | ||
| Roller Chain With Straight Side Plates (B Series) | C08B-1-2-3 C10B-1-2-3 C12B-1-2-3 C16-1-2-3 C20B-1-2-3 C24B-1-2-3 C28B-1-2-3 C32B-1-2-3 | |
| Double Pitch Conveyor Chain | C208A C208AH C208B C208BL C210A C210AL C212A C212AH C212AHL C216A C216AL C216AH C216AHL C220A C220AL C220AH C220AHL C224A C224AL C224AH C224AHL C232A C232AL C232AH C232AHL | |
| C2050 C2052 C2060 C2062 C2060H C2080 C2080H C2082 C2082H C2100 C2100H C2102 C2102H C2120 C2120H C2122 C2122H C2160 C2160H C2162 C2162H | ||
| Double Pius Speed Chain | BS25-C206B BS25-C208A BS25-C210A BS25-C212A BS30-C206B BS30-C208B BS30-C210B BS30-C212B | |
| Conveyor Chain (M Series) | M20 M28 M40 M56 M80 | |
| Hollow Pin Conveyor Chain (MC Series) | MC28 MC56 MC112 MC224 | |
| Conveyor Chain (FV Series) | FV40 FV63 FV90 FV112 FV140 | |
| Conveyor Chain (FVT Series) | FVT40 FVT63 FVT90 FVT112 FVT140 FVT180 FVT250 FVT315 | |
| Hollow Pin Conveyor Chain (FVC Series) | FVC63 FVC90 FVC112 FVC140 FVC180 FVC250 FVC315 | |
| Conveyor Chain (Z Series) | Z40 Z100 Z160 Z300 | |
| Conveyor Chain (ZE Series) | ZE40 ZE100 ZE160 ZE300 | |
| Hollow Pin Conveyor Chain (ZC Series) | ZC21 ZC40 ZC60 ZC150 ZC300 | |
| Hollow Pin Chains | 08BHPF 08BHPF5 08BHP9 10BHPF3 10BHPF4 12BHPF2 12BHPF3 16BHPF3 16BHPF4 40HP 08BHPF7 08BHP 50HP 50HPF4 50H-HP 60HP 60HPF1 80HP 80HPF1 80HPF2 80H-HP 80HPF3 80HPF4 HB41.75F5 A2080HP | |
| Welded type cranked link chains | WR78 WH78 WR82 WH82 WR106 WH106 WR110 WH110 WR111 WH111 WR124 WH124 WR132 WH132 WR150 WH150 WR155 WH155 WR157 WH157 WR78F5 WH78F4 WH124F1 WH111F1 | |
| Palm oil Chains | P101.6F2 P152F14 P152F17 P152F29 90R-S P101.6F64 P76.7 P152F31 | |
| Sugar mill chains | DH9063 DH2198 P152F93K2 P152F78K2 DH 0571 0 DH1796 P152F77-AS2 P203.2F9 | |
| Rubber gloves carrier chains | P100F155 P100F13 P100F139 P150/90 | |
| Lumber conveyor chains | 81X 81XH 81XHE 81XHH 81XHS 500R 441.100R | |
| Sharp top chains | 08AF34 08BF21 10AF8 41F6 06BF1 06BF37 08AF41 08BF44 08AF8… | |
| Stainless Steel Chain | Stainless Steel Short Pitch Precision Roller Chain(A Series) | 25SS-1 35SS-1 41SS-1 40SS-1 50SS-1 60SS-1 80SS-1 100SS-1 120SS-1 |
| Stainless Steel Short Pitch Precision Roller Chain(B Series) | 05BSS-1 06BSS-1 08BSS-1 10BSS-1 12BSS-1 16BSS-1 20BSS-1 24BSS-1 | |
| Stainless Steel Roller Chain With Straight Side Plates | C40SS-1 C50SS-1 C60SS-1 C80SS-1 C100SS-1 C120SS-1 C08BSS-1 C10BSS-1 C12BSS-1 C16BSS-1 C20BSS-1 C24BSS-1 | |
| Stainless Steel Double Pitch Transmission Chain | 2040SS 2050SS 2060SS 2080SS 2100SS 2120SS 208BSS 210BSS 212BSS 216BSS 220BSS 224BSS | |
| Stainless Steel Double Pitch Conveyor Chain | C2040SS C2040HSS C208BSS C2050SS C2060SS C2060HSS C2080SS C2080HSS C2100SS C2100HSS C2120SS C2120HSS | |
| Stainless Steel Hollow Pin Chain | 08BHFSS 40HPSS 50HPSS 60HPSS 12BHPSS 80HPSS C2040HPSS C2050HPSS C2060HPSS C2080HPSS HB50.8SS | |
| Stainless Steel Double Pitch Hollow Pin Chain | C2042HPSS C2052HPSS C2062HPSS C2082HPSS C2042H-HPSS C2052H-HPSS C2062H-HPSS C2082H-HPSS | |
| Lifting Chain | Car Parking Chain | 12AT-1 16AT-1-2 20AT-1-2-3 24AT-1-2 |
| Leaf Chain | LH0822 LH0823 LH571 LH0844 LH0846 LH 0571 LH1571 LH1571 LH1034 LH1044 LH1046 LH1066 LH1088 LH1222 LH1223 LH1234 LH1244 LH1246 LH1266 LH1288 | |
| BL422 BL423 BL434 BL444 BL446 BL466 BL488 BL522 BL523 BL534 BL544 BL546 BL566 BL588 BL622 BL623 BL634 BL644 BL646 BL666 BL688 | ||
| Multile Plate Bearing Pin Chain | LF30 MP50F2 MP50.8 MP70F1 MP70F2 MP70F3 MP80F1 MP90F1 MP90F2 MP110F1 | |
| Rollerless Lift Chain | 45-1 55-1 65-1 85-1 105-1 125-1 145-1 165-1 | |
| Agricultural Chain | S Type Steel Agricultural Chain & Attachments | S32 S42 S45 S52 S55 S62 S77 S88 A550 A620 |
| C Type Steel Agricultural Chain with Attachments | CA550 CA550/S55 CA555 CA550HD CA550V CA557 CA620 CA2801 38.1R 38.4R 38.4V 38.4VB | |
| Rice Harvester Chain | S3558T-48001 S3558T-48002 | |
| Drop Forged Chain Series | Drop Forged Rivetless Chain | Imperial: 80H X348 X458 468H X658 X678 678 698 998 9118 S348 S458 S678 S698 S9118, Metric system: XT100 XT160 |
| Cast Detachable Chain | 55 57 62 74 78 | |
| Steel Detachable Chain | 25 32 32W 51 52 55 62 | |
| Cast Iron Chain | Cast Iron Chain (C Series) | C55 C55L C77 C188 C188L C102B C111 C131 C132 |
| Cast Iron Chain (H Series) | H60 H78 H82 H110 | |
| Cast Iron Chain (4 Series) | 462 477 488 4103 720 720S 730 | |
| Cast Iron Chain BRH188 | BRH188 C188CP C102B-K2 C55A C55B C55D CC600 H78A H78B H130 H138 MC33 103 4103F29 907-E51 | |
| Welded chains | WR78 WH78 WR82 WH82 WR124 WH124 | |
| Forging Hanging Chain | X228 X348 X458 X678 698 |
Related products
| Usage: | Transmission Chain, Drag Chain, Conveyor Chain, Dedicated Special Chain |
|---|---|
| Material: | Stainless steel |
| Surface Treatment: | Oil Blooming |
| Feature: | Oil Resistant |
| Chain Size: | 1/2"*3/32" |
| Structure: | Roller Chain |
| Samples: |
US$ 9999/Piece
1 Piece(Min.Order) | |
|---|
What are the best practices for maintaining and cleaning car parking chains to extend their lifespan?
Proper maintenance and regular cleaning are essential to extend the lifespan of car parking chains. By following these best practices, you can ensure the chains remain in good working condition and provide reliable access control for an extended period:
1. Regular Inspections: Conduct routine inspections of the parking chains to identify signs of wear, damage, or misalignment. Promptly address any issues to prevent further damage and ensure optimal performance.
2. Lubrication: Apply appropriate lubrication to the chain links and any moving parts of the chain mechanism. Lubrication reduces friction and wear, allowing the chain to move smoothly.
3. Cleaning: Regularly clean the parking chains to remove dirt, dust, and debris that can accumulate over time. Clean chains ensure smooth movement and prevent unnecessary wear.
4. Remove Obstructions: Ensure that the area around the parking chains is clear of any obstacles that could hinder their movement or cause damage.
5. Weather Protection: Apply protective coatings or paint to steel chains to minimize the impact of weather elements and reduce the risk of corrosion.
6. Addressing Corrosion: For chains made of materials susceptible to corrosion, such as steel, regularly inspect for signs of rust and treat affected areas to prevent further corrosion.
7. Tension and Alignment: Check the tension and alignment of the chains regularly. Make necessary adjustments to ensure the chain remains properly tensioned and aligned.
8. Use Quality Materials: Invest in high-quality parking chains made from durable materials to ensure their longevity and resistance to wear and tear.
9. Proper Handling: Train parking attendants or personnel responsible for operating the parking chains to handle them properly and avoid unnecessary stress or damage.
10. Follow Manufacturer’s Guidelines: Adhere to the manufacturer’s guidelines and recommendations for maintenance and care.
By following these best practices, you can significantly extend the lifespan of car parking chains and ensure they provide reliable access control in parking facilities for many years.
What are the safety features of car parking chains to prevent accidents and injuries?
Car parking chains are designed with several safety features to prevent accidents and injuries. These features ensure that the chains operate safely and effectively, protecting both vehicles and users. Some common safety features include:
1. Reflective Elements: Many parking chains have reflective coatings or materials to enhance visibility, especially during low-light conditions. This makes the chains more noticeable to drivers and pedestrians, reducing the risk of collisions.
2. Smooth and Even Surface: Parking chains are manufactured with smooth and even surfaces to prevent any sharp edges or protrusions that could cause injuries or damage to vehicles.
3. Clear Signage: Proper signage is placed near the parking chains to inform users of their presence and how to operate them. This helps prevent confusion and misuse.
4. Low Friction: Chains are often lubricated to reduce friction and ensure smooth movement, minimizing the risk of accidents caused by chain jams or abrupt stops.
5. Emergency Access: Parking chains are designed with emergency access in mind. In manual systems, there are quick-release mechanisms to allow easy removal of the chain in emergency situations or to facilitate access for emergency vehicles.
6. Height and Clearance: Proper clearance is maintained to prevent chains from interfering with vehicles or causing damage during entry or exit.
7. Secure Mounting: Parking chains are securely mounted to prevent accidental detachment or falling, especially in retractable systems.
8. Load Capacity: For automatic systems, parking chains are designed to handle the weight of vehicles passing through, ensuring they can safely support the load.
9. Regular Maintenance: Regular inspections and maintenance help identify any safety issues and address them promptly, ensuring the chains remain safe for use.
10. Training and Education: Parking attendants and users should receive proper training on how to operate the parking chains safely and effectively.
By incorporating these safety features and promoting responsible use, car parking chains can effectively prevent accidents and injuries, providing a secure and controlled parking environment for all users.
What are the benefits of using a car parking chain compared to other parking control methods?
Car parking chains offer several advantages over other parking control methods:
- Cost-effectiveness: Parking chains are generally more affordable to install and maintain compared to more complex systems like automated gates or barrier arms.
- Simplicity: They provide a straightforward and easy-to-understand method for controlling vehicle access, requiring minimal training for attendants or personnel.
- Durability: Made from sturdy metal materials, parking chains are robust and can withstand various weather conditions and potential wear and tear.
- Flexibility: Parking chains can be used in various locations, including small parking lots, private driveways, or temporary event spaces, where a permanent gate system may not be feasible.
- Manual and Automated Options: Depending on the setup, parking chains can be operated manually by attendants or automated using electronic access control systems, offering convenience for users.
- Visual Deterrent: The presence of a chain across the entrance acts as a visual deterrent, dissuading unauthorized vehicles from attempting to enter the parking area.
While car parking chains are advantageous in many situations, they may not be suitable for high-traffic areas or locations where more sophisticated access control is necessary for security reasons. In such cases, other methods like automated gates, barrier arms, or ticket-based systems may be more appropriate.
“`
editor by CX 2023-11-09
China Best Sales ANSI Bl-523 Leaf Chain for Motorcycle Parts Car Parking Forklift Truck Sky Stacker
Product Description
Leaf Chain
Leaf chains are known for their durability and high tensile strength. They are primarily used in lift device applications such as forklifts, lift trucks, and lift masts. These hard working chains handle the lifting and balancing of heavy loads with the use of sheaves instead of sprockets for guidance. One of the primary differences with leaf chain compared to roller chain is that it only consists of a series of stacked plates and pins, providing superior lifting strength.
Leaf Chains and Strength
Leaf chains are famous with engineers for their strength in materials handling, such as with forklifts, lift trucks, lift masts, straddle carriers, and other major works of civil engineering. Their long service life, high fatigue strength and maximum wear resistance make them the ideal solution for long-term projects that need to be both reliable and incredibly strong. The compact design of leaf chains allows them to fit well within a variety of systems. The key parts of a leaf chain include:
Link Plates: Close control of the plate dimensions allows for high fatigue strength and long service life.
Pins: The pins pass through the plates and are subject to shearing forces, while the plates articulate on the pins through rotation over the sheave.
Leaf Chain AL Series or Leaf Chain BL Series
The American National Standards Institute (ANSI) determines consensus standards for a wide range of products and processes in the U.S. that are also adopted worldwide. This regulatory body provides the chain industry with specifics around size and strength that govern the manufacture of different types of chains, including leaf chains and roller chains. While these standards do not often change, AL Series was removed from ANSI Standard in 1975. The newer edition of the standard is BL Series, which replaced the AL Series. AL and BL Series are dimensionally different. BL Series has a higher tensile strength than AL Series and is more commonly used today. However, older machinery may still use the AL Series of leaf chain, which is still offered by HangZhou Star Machine Technology Co., Ltd. in a variety of different sizes.
When you need a leaf chain to keep your project in balance, contact the experienced professionals at HangZhou Star Machine Technology Co., Ltd. If you’re not sure exactly what type or size of chain that you need, we have decades of experience working with customers to provide the ideal chain or sprocket to keep you moving. We have a full line of Leaf AL Series Chains as well as Leaf BL Series Chains.
| Chain No. |
Assembly |
Pitch A |
Pin Dia. D |
Plate | Overall Width | Maximum Allowable Load (lbs) |
Average Ultimate Strength (lbs) |
Average Weight Per Foot (lbs) Riveted |
||
| Height H |
Thickness T |
E | ||||||||
| BL Series | ||||||||||
| BL-523 | 2X3 | 5/8 | 0.234 | 0.571 | 0.094 | 0.60 | 1,540 | 9,100 | 0.74 | |
Leaf chains are built of interlaced plates held together by rivet pins. They are built with the same high degree of precision as our roller chains. HKK Leaf chains are used for applications that require strong flexible linkage for transmitting motion or lift. Specially selected steel and unique heat treatment assures high strength and durability. The first number or numbers in leaf chains identifies the chain pitch, the last 2 numbers identify the chain’s lacing. New applications should use BL series leaf chains.
QUICK REFERENCE XIHU (WEST LAKE) DIS.
Leaf Chain is the most simple of steel chains, consisting only of link plates and pins. This chain generally has greater tensile strength than roller chains and runs over sheaves rather than sprockets. They are suitable for hanging, balancing or motion transmitting applications. Leaf chains are often used as counterweight chains for machine tools, elevator and oven doors, fork lift truck masts, spinning frames and similar lifting or balancing applications.
Plates are connected by pins and hold the tension loaded on the chain.
AL Type
Plate configuration and thickness are the same as ANSI G8 roller chain. Pin diameter is almost the same as ANSI G8 roller chain.
BL Type
BL Series leaf chains consist of link plates which are thicker and larger in contour than the AL Series link plates of the same pitch. The link plates have the same thickness as the link plates of the next larger pitch size in ANSI G8 roller chains. The pins have the same diameter as those of ANSI G8 roller chains of the next larger pitch.
For Applications That Required Strong Flexible Linkage | Ideal for Lifting Applications | Specially Selected Steel | Unique Heat Treatment Process
WHY CHOOSE US
1. Reliable Quality Assurance System
2. Cutting-Edge Computer-Controlled CNC Machines
3. Bespoke Solutions from Highly Experienced Specialists
4. Customization and OEM Available for Specific Application
5. Extensive Inventory of Spare Parts and Accessories
6. Well-Developed CHINAMFG Marketing Network
7. Efficient After-Sale Service System
The 219 sets of advanced automatic production equipment provide guarantees for high product quality. The 167 engineers and technicians with senior professional titles can design and develop products to meet the exact demands of customers, and OEM customizations are also available with us. Our sound global service network can provide customers with timely after-sales technical services.
We are not just a manufacturer and supplier, but also an industry consultant. We work pro-actively with you to offer expert advice and product recommendations in order to end up with a most cost effective product available for your specific application. The clients we serve CHINAMFG range from end users to distributors and OEMs. Our OEM replacements can be substituted wherever necessary and suitable for both repair and new assemblies.
| Standard or Nonstandard: | Standard |
|---|---|
| Application: | Textile Machinery, Garment Machinery, Conveyer Equipment, Packaging Machinery, Electric Cars, Motorcycle, Food Machinery, Marine, Mining Equipment, Agricultural Machinery, Car |
| Surface Treatment: | Baking Paint, Polishing |
| Samples: |
US$ 10/Meter
1 Meter(Min.Order) | Order Sample |
|---|
| Customization: |
Available
| Customized Request |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
What are the weather-resistant properties of car parking chains, and how do they perform in outdoor environments?
Car parking chains are designed to have weather-resistant properties, making them suitable for outdoor environments. These weather-resistant features ensure that the chains can withstand various weather conditions and continue to function effectively. Here are the key weather-resistant properties of car parking chains:
1. Corrosion Resistance: Many car parking chains, especially those made from stainless steel or aluminum, offer excellent corrosion resistance. This property prevents the chains from rusting or deteriorating when exposed to rain, humidity, or salty air in coastal areas.
2. Coatings and Treatments: Some parking chains are coated with protective materials, such as zinc or epoxy coatings, to provide an additional layer of protection against moisture and weather elements.
3. UV Resistance: Parking chains made from materials like PVC or certain plastics are UV-resistant, ensuring that they can withstand prolonged exposure to sunlight without fading or becoming brittle.
4. All-Weather Performance: Weather-resistant parking chains are designed to function in various weather conditions, including rain, snow, and extreme temperatures. They maintain their structural integrity and performance throughout the seasons.
5. Sealed Joints: In some parking chains, the joints or connections are sealed to prevent water or moisture from seeping inside, ensuring that the chain remains free from rust or other forms of degradation.
6. High-Quality Materials: Weather-resistant car parking chains are typically made from high-quality materials that are specifically chosen for their ability to withstand outdoor environments.
7. Regular Maintenance: While parking chains are designed to be weather-resistant, regular maintenance is essential to ensure their long-term performance in outdoor environments. Periodic cleaning, lubrication, and inspections help identify and address any potential issues.
Overall, car parking chains with weather-resistant properties are designed to endure outdoor conditions and provide reliable access control in various weather scenarios. Facility managers should choose chains with appropriate weather-resistant features based on the specific environmental conditions of their parking facility.
What are the maintenance requirements for car parking chains to ensure smooth operation over time?
Regular maintenance is essential to ensure the smooth operation and longevity of car parking chains. Proper care and attention will help prevent malfunctions and ensure reliable access control in parking facilities. Here are the key maintenance requirements:
1. Cleaning: Regularly clean the parking chains to remove dirt, dust, and debris that can accumulate over time. Clean chains ensure smooth movement and prevent unnecessary wear.
2. Lubrication: Apply appropriate lubrication to the chain links and any moving parts of the chain mechanism. Lubrication reduces friction and wear, allowing the chain to move smoothly.
3. Inspection: Conduct routine inspections of the parking chains to identify any signs of wear, damage, or misalignment. Promptly address any issues to prevent further damage and ensure optimal performance.
4. Adjustments: Check the tension and alignment of the chains regularly. Make necessary adjustments to ensure the chain remains properly tensioned and aligned.
5. Replacement of Worn Parts: If any components of the parking chain show significant wear or damage, replace them promptly to maintain the chain’s integrity and functionality.
6. Weather Protection: Apply protective coatings or paint to steel chains to minimize the impact of weather elements and reduce the risk of corrosion.
7. Addressing Corrosion: For chains made of materials susceptible to corrosion, such as steel, regularly inspect for signs of rust and treat affected areas to prevent further corrosion.
8. Preventing Obstructions: Ensure that the area around the parking chains is clear of any obstacles that could hinder their movement or cause damage.
9. Training and Education: Train parking attendants or personnel responsible for operating the parking chains to handle them properly and conduct basic maintenance tasks.
10. Regular Testing: Periodically test the raising and lowering mechanism of the parking chains to verify that they are functioning correctly.
By adhering to these maintenance requirements, parking facility managers can ensure the smooth operation and reliability of car parking chains, minimizing downtime and ensuring efficient access control for vehicles in the long run.
How do automatic car parking chains work, and what are their advantages over manual systems?
Automatic car parking chains are an advanced version of traditional manual parking chains that offer more convenience and efficiency in controlling vehicle access. Here’s how they work and their advantages over manual systems:
1. Automated Operation: Automatic parking chains are integrated with electronic access control systems, such as keycard readers, RFID (Radio Frequency Identification) tags, or remote-controlled mechanisms. When an authorized vehicle approaches the entrance, the system automatically detects the vehicle’s credentials and raises the chain to allow entry.
2. Enhanced Security: With automated access control, there is a reduced risk of human error, which can be a vulnerability in manual systems. Only vehicles with valid credentials can enter, making it harder for unauthorized vehicles to gain access.
3. Time Efficiency: Automated car parking chains operate swiftly, minimizing waiting times for authorized users. This is particularly advantageous in high-traffic areas where manual control could cause congestion during peak hours.
4. Remote Management: Some automatic parking chains can be remotely controlled, allowing operators to manage access from a central location. This can be especially useful for large parking facilities or when physical attendance is not feasible.
5. Integration with Payment Systems: Automated chains can be connected to payment systems, enabling seamless access for users who have paid the required fees or have valid subscriptions.
6. Scalability: Automatic car parking chains can be easily integrated with other smart parking technologies, like ticketing systems or license plate recognition, to create a comprehensive and efficient parking management solution.
7. Reduced Labor Costs: As the system operates automatically, there is no need for manual attendance, leading to potential cost savings in labor.
8. Remote Monitoring: Some advanced automatic systems come with remote monitoring capabilities, allowing operators to track vehicle movement and access patterns in real-time.
Despite these advantages, automatic car parking chains may require higher upfront investment and ongoing maintenance costs compared to traditional manual systems. The choice between the two largely depends on the specific needs and budget constraints of the parking facility or garage.
editor by CX 2023-11-08
China Professional High Quality Chain Factory Conveying Transmission Roller Leaf Chain Lift Double Pitch Extended Pin Car Parking
Product Description
Product Description
Product introduction
1. The leaf chain shall conform to ISO, BS, JS and other standards
2. Mainly BL, AL, LL, FL series leaf chains
3. Our customized leaf chain service can be provided according to customer requirements
4. The blade chain is made of high-quality materials and adopts heat treatment technology
5. The products are widely used in forklifts, textile machinery, drilling rigs, etc. to achieve vertical lifting, horizontal traction and other purposes.
Available materials
1. Stainless steel: 304, 316, etc.
2. Alloy steel: 45 Mn, 42 CrMo, 20CrMo, etc.
3.OEM according to your requirements
4.Surface treatment: polishing, zinc plating, nickel plating, etc
5.Design standard: ISO DIN ANSI meets the requirements of customer drawings
6.Certificate: ISO9001:2008
Product Attribute
|
Usage |
Leaf Chain ,Flyer chain |
|
Material |
Alloy/Carbon Steel |
| Application industry | Metallurgy, coal, electricity, food, chemical industry, tobacco, beverage, etc |
|
Surface Treatment |
Self-color Sand-blasted Shot-peening |
| Product Series |
AL,BL ,LL,FL,LH |
| Port |
Any sea port or airport in China |
| Brand | TV OEM |
| Payment |
L/C, T/T, D/P, Western Union |
| Package |
Chain, Plastic Bag, Color Box, Wooden Case. or OEM |
| AL Series |
AL322,AL344,AL422,AL444,AL466,AL522,AL534,AL544,AL566,AL622,AL644,AL666,AL688 AL822,AL844,AL866,AL888,AL1571,AL1044,AL1066,AL1088,AL1222,AL1244,AL1266,AL1288 AL1444,AL1466,AL1644,AL1666,AL1688 |
| BL Series | BL422,BL423,BL434,BL444,BL446,BL488,BL522,BL523,BL534,BL544,BL546,BL566,BL588
BL622,BL623,BL634,BL644,BL646,BL688,BL822,BL823,BL834,BL844,BL846,BL866,BL888 BL1571,BL1571,BL1034,BL1044,BL1046,BL1088,BL1222,BL1223,BL1234,BL1244,BL1246 BL1266,BL1288,BL1422,BL1423,BL1434,BL1444,BL1446,BL1488,BL1622,BL1623,BL1634 BL1644,BL1646,BL1666,BL1888,BL2571,BL2571,BL2034,BL2044,BL2046,BL2088 |
| LL Series | LL0622,LL0644,LL0666,LL0822,LL0844,LL0866,LL 0571 ,LL1571,LL1044,LL1066,LL1088,LL1222
LL1244,LL1266,LL1288,LL1622,LL1644,LL1666,LL1688,LL2571,LL2044,LL2066,LL2088,LL2422 LL2444,LL2466,LL2488,LL2822,LL2844,LL2866,LL2888,LL3222,LL3244,LL3266,LL3288,LL4571 LL4044,LL4066,LL4088,LL4822,LL4844,LL4866,LL4888 |
| LH Series | LH0822,LH0823,LH571,LH0844,LH0846,LH0866,LH 0571 ,LH1571,LH1571,LH1034,LH1044
LH1046,LH1066,LH1088,LH1222,LH1223,LH1234,LH1244,LH1246,LH1266,LH1288,LH1622 LH1623,LH1634,LH1644,LH1646,LH1666,LH1688,LH2571,LH2571,LH2034,LH2044,LH2046 LH2066,LH2088,LH2422,LH2423,LH2434,LH2444,LH2446,LH2466,LH2488,LH2822,LH2823 LH2834,LH2844,LH2846,LH2866,LH2888,LH3222,LH3223,LH3234,LH3244,LH3246,LH3266 LH3288,LH4571,LH4571,LH4034,LH4044,LH4046,LH4066,LH4088 |
| FL Series | FL644,FL666,FL688,FL523,FL844,FL922,FL944,FL945,FL956,FL966,FL988 |
| We also carry out OEM according to your requirements |
|
Detailed Photos
Product Parameters
Our Advantages
Company Advantages:
Own Import & Export License, The TV trade mark registered successfully in many countries, Sales network spread all over China, Products export to 65 countries in 5 continents.
Membership:
1. The member of China General Machine Components Industry Association.
2. The member of China Chain Transmission Association.
3. The member of China Chain Standardization Association.
4. The member of China Agricultural Association Machinery Manufacturers.
With our excellent trained staffs and workers, advanced and efficient equipments, completely sales network, strict QA systems. You are confidence that our premium qualified chain can meet all customers’ specification and strictest quality standards.
Please do not hesitate to contact us for more information on how TransVision products can meet your industries demands at highly competitive pricing.
Quality First, Clients Uppermost.
Product Categories
| WHY CHOOSE US |
Comprehensive Product Portfolio We produce and supply a wide range of power transmission
products including drive chains, leaf chains, conveyor chains, agricultural chains, sprockets, and
couplings. This one-store-for-all shopping experience will significantly reduce your searching costs while
guarantee youfind what you want at 1 click.
Value Choice Products Our products are the best combination of quality and price, and you get what
you want within your budgets
Seasoned Sales Associates and Engineers We have 15 seasoned sales associates and 5 engineers;
on our team at your disposal any time when you need a helping hand. They are well trained with industry
know-now and will always respond to your requests within 24 hours.
100% Customer Retention Rate Our regular customers from overseas come back not just for our
premium quality products, but for the superior services that we’ve provided over the years.
| FAQ |
| Q1: What’s your average lead time? A: It varies. Our regular end-to-end lead time is 1-2 months.. We also provide express shipments for rush orders. For details,please consult our sales associate. Q2: Is your price better than your competitors given the same quality? Q4: Can we inspect the goods before shipment? Q5: What kind of payment method is acceptable for your mill? Q6: What if I have any other questions? |
| Standard or Nonstandard: | Standard |
|---|---|
| Application: | Conveyer Equipment, Packaging Machinery, Food Machinery, Mining Equipment, Agricultural Machinery |
| Surface Treatment: | Heat Treatment |
| Samples: |
US$ 5/Meter
1 Meter(Min.Order) | Order Sample |
|---|
| Customization: |
Available
| Customized Request |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Can car parking chains be integrated with access control systems, such as key cards or remote controls?
Yes, car parking chains can be integrated with access control systems, allowing for more efficient and convenient vehicle access in parking facilities. Integration with access control systems offers several benefits:
1. Key Cards: Parking chains can be linked to electronic access control systems that use key cards or RFID tags. Authorized users are provided with key cards that they can swipe or tap at the entrance to raise the chain, granting them access to the parking area.
2. Remote Controls: In automated parking chains, remote controls can be used to raise or lower the chains. This is particularly useful for parking attendants or personnel who can remotely manage vehicle access from a central location, reducing the need for physical presence at the entrance.
3. Electronic Passes: Some parking facilities issue electronic passes to authorized users. These passes can be read by sensors at the entrance, automatically raising the chain to allow access without the need for manual operation.
4. License Plate Recognition: Advanced access control systems may use license plate recognition technology to automatically identify and grant access to pre-registered vehicles as they approach the entrance, eliminating the need for physical cards or passes.
5. Time-Based Access: Access control systems can be configured to grant access only during specific times or days. This is particularly useful for parking facilities with restricted access hours or reserved parking spaces for certain users.
6. Enhanced Security: Integration with access control systems improves security by ensuring that only authorized vehicles can enter the parking area, reducing the risk of unauthorized access or parking violations.
7. Efficient Traffic Management: Automated access control systems can process vehicles more quickly, reducing waiting times and traffic congestion at the entrance during peak hours.
By integrating car parking chains with access control systems, parking facilities can enhance security, improve user experience, and efficiently manage vehicle access, making it a popular choice for modern parking facilities.
Are there any eco-friendly options for car parking chains, such as those made from recycled materials?
Yes, there are eco-friendly options available for car parking chains that promote sustainability and environmental responsibility. These options include:
1. Recycled Materials: Some manufacturers produce parking chains using recycled materials, such as recycled steel or other metals. Using recycled materials reduces the demand for new raw materials and helps minimize the environmental impact of production.
2. Biodegradable or Eco-Friendly Coatings: For parking chains that require protective coatings, eco-friendly options may include biodegradable or environmentally friendly coatings that are less harmful to the environment during application and disposal.
3. Alternative Materials: Apart from traditional metals, eco-friendly parking chains can be made from alternative materials like bamboo or other sustainable resources. These materials have a lower environmental footprint and are renewable.
4. Energy-Efficient Manufacturing: Some manufacturers employ energy-efficient manufacturing processes for parking chains, minimizing energy consumption and reducing greenhouse gas emissions.
5. Longevity and Durability: While not directly related to the materials used, designing parking chains for longevity and durability helps reduce the need for frequent replacements, which, in turn, reduces waste generation.
6. End-of-Life Recycling: Eco-friendly parking chains can be designed with consideration for ease of recycling at the end of their life cycle. This encourages proper disposal and recycling practices, reducing the amount of waste that ends up in landfills.
7. Environmental Certifications: Look for parking chain manufacturers that have obtained environmental certifications or adhere to sustainable production practices.
By choosing eco-friendly car parking chains, parking facility owners and operators can contribute to environmental conservation and sustainability efforts, aligning their operations with green initiatives and reducing their overall ecological impact.
How do automatic car parking chains work, and what are their advantages over manual systems?
Automatic car parking chains are an advanced version of traditional manual parking chains that offer more convenience and efficiency in controlling vehicle access. Here’s how they work and their advantages over manual systems:
1. Automated Operation: Automatic parking chains are integrated with electronic access control systems, such as keycard readers, RFID (Radio Frequency Identification) tags, or remote-controlled mechanisms. When an authorized vehicle approaches the entrance, the system automatically detects the vehicle’s credentials and raises the chain to allow entry.
2. Enhanced Security: With automated access control, there is a reduced risk of human error, which can be a vulnerability in manual systems. Only vehicles with valid credentials can enter, making it harder for unauthorized vehicles to gain access.
3. Time Efficiency: Automated car parking chains operate swiftly, minimizing waiting times for authorized users. This is particularly advantageous in high-traffic areas where manual control could cause congestion during peak hours.
4. Remote Management: Some automatic parking chains can be remotely controlled, allowing operators to manage access from a central location. This can be especially useful for large parking facilities or when physical attendance is not feasible.
5. Integration with Payment Systems: Automated chains can be connected to payment systems, enabling seamless access for users who have paid the required fees or have valid subscriptions.
6. Scalability: Automatic car parking chains can be easily integrated with other smart parking technologies, like ticketing systems or license plate recognition, to create a comprehensive and efficient parking management solution.
7. Reduced Labor Costs: As the system operates automatically, there is no need for manual attendance, leading to potential cost savings in labor.
8. Remote Monitoring: Some advanced automatic systems come with remote monitoring capabilities, allowing operators to track vehicle movement and access patterns in real-time.
Despite these advantages, automatic car parking chains may require higher upfront investment and ongoing maintenance costs compared to traditional manual systems. The choice between the two largely depends on the specific needs and budget constraints of the parking facility or garage.
editor by CX 2023-10-27
China Best Sales DIN/ISO Ll Series Leaf-Chain for Stacker Forklift Car Parking Conveyor Transmission Parts
Product Description
| DIN/ISO Chain No. |
Pitch
P |
Plate lacing | Plate depth
h2max |
Plate thickness
Tmax |
Pin diameter
d2max |
Pin length
L |
Tensile strength
Qmin |
Average tensile strength Q0 |
Weight per meter q kg/m |
| LL1622 | 25.40 | 2×2 |
21.00
|
3.10
|
8.28
|
17.2 | 58.0/13182 | 76.3 | 1.52 |
| LL1644 | 4×4 | 29.6 | 116.0/26363 | 152.6 | 2.90 | ||||
| LL1666 | 6×6 | 42.4 | 174.0/39545 | 228.9 | 4.30 | ||||
| LL1688 | 8×8 | 54.9 | 232.0/52726 | 305.2 | 5.71 | ||||
| LL2571 | 31.75 | 2×2 |
26.40
|
3.70
|
10.19
|
20.1 | 95.0/21591 | 109.2 | 2.33 |
| LL2044 | 4×4 | 33.8 | 190.0/43182 | 218.5 | 4.40 | ||||
| LL2066 | 6×6 | 50.1 | 285.0/64773 | 324.6 | 6.79 | ||||
| LL2088 | 8×8 | 64.0 | 380.0/86363 | 435.1 | 8.90 | ||||
| LL2422 | 38.10 | 2×2 |
33.40
|
5.00
|
14.63
|
28.4 | 170.0/38363 | 195.5 | 4.47 |
| LL2444 | 4×4 | 46.3 | 340.0/77273 | 380.8 | 8.22 | ||||
| LL2466 | 6×6 | 66.4 | 510.0/115909 | 571.2 | 12.22 | ||||
| LL2488 | 8×8 | 86.6 | 680.0/154545 | 775.2 | 16.30 | ||||
| LL2822 | 44.45 | 2×2 |
37.08
|
6.00
|
15.90
|
32.2 | 200.0/45455 | 245.0 | 5.40 |
| LL2844 | 4×4 | 56.4 | 400.0/9 0571 | 490.0 | 10.53 | ||||
| LL2866 | 6×6 | 80.8 | 600.0/136363 | 735.0 | 15.68 | ||||
| LL2888 | 8×8 | 105.2 | 800.0/181818 | 980.0 | 20.83 | ||||
| LL3222 | 50.80 | 2×2 |
42.00
|
6.40
|
17.81
|
34.8 | 260.0/59091 | 291.2 | 6.39 |
| LL3244 | 4×4 | 60.6 | 520.0/118182 | 582.4 | 12.46 | ||||
| LL3266 | 6×6 | 86.4 | 780.0/177272 | 873.6 | 18.52 | ||||
| LL3288 | 8×8 | 112.2 | 1040.0/233970 | 1176.0 | 24.65 | ||||
| LL4571 | 63.50 | 2×2 |
52.76
|
8.00
|
22.89
|
42.2 | 360.0/81818 | 403.2 | 10.36 |
| LL4044 | 4×4 | 74.4 | 780.0/177273 | 873.6 | 20.22 | ||||
| LL4066 | 6×6 | 106.5 | 1080.0/245454 | 1209.6 | 30.07 | ||||
| LL4088 | 8×8 | 140.0 | 1440.0/323959 | 1747.2 | 39.98 | ||||
| LL4822 | 76.20 | 2×2 |
63.88
|
10.00
|
29.24
|
54.6 | 560.0/127272 | 627.2 | 15.94 |
| LL4844 | 4×4 | 92.6 | 1120.0/254545 | 1554.4 | 31.38 | ||||
| LL4866 | 6×6 | 133.4 | 1680.0/377953 | 1880.0 | 46.94 | ||||
| LL4888 | 8×8 | 174.2 | 2240.0/5571 | 2508.8 | 62.36 |
Leaf Chain
Leaf chains are known for their durability and high tensile strength. They are primarily used in lift device applications such as forklifts, lift trucks, and lift masts. These hard working chains handle the lifting and balancing of heavy loads with the use of sheaves instead of sprockets for guidance. One of the primary differences with leaf chain compared to roller chain is that it only consists of a series of stacked plates and pins, providing superior lifting strength.
Leaf Chains and Strength
Leaf chains are famous with engineers for their strength in materials handling, such as with forklifts, lift trucks, lift masts, straddle carriers, and other major works of civil engineering. Their long service life, high fatigue strength and maximum wear resistance make them the ideal solution for long-term projects that need to be both reliable and incredibly strong. The compact design of leaf chains allows them to fit well within a variety of systems. The key parts of a leaf chain include:
Link Plates: Close control of the plate dimensions allows for high fatigue strength and long service life.
Pins: The pins pass through the plates and are subject to shearing forces, while the plates articulate on the pins through rotation over the sheave.
Leaf Chain AL Series or Leaf Chain BL Series
The American National Standards Institute (ANSI) determines consensus standards for a wide range of products and processes in the U.S. that are also adopted worldwide. This regulatory body provides the chain industry with specifics around size and strength that govern the manufacture of different types of chains, including leaf chains and roller chains. While these standards do not often change, AL Series was removed from ANSI Standard in 1975. The newer edition of the standard is BL Series, which replaced the AL Series. AL and BL Series are dimensionally different. BL Series has a higher tensile strength than AL Series and is more commonly used today. However, older machinery may still use the AL Series of leaf chain, which is still offered by HangZhou Star Machine Technology Co., Ltd. in a variety of different sizes.
Leaf chains are built of interlaced plates held together by rivet pins. They are built with the same high degree of precision as our roller chains. HKK Leaf chains are used for applications that require strong flexible linkage for transmitting motion or lift. Specially selected steel and unique heat treatment assures high strength and durability. The first number or numbers in leaf chains identifies the chain pitch, the last 2 numbers identify the chain’s lacing. New applications should use BL series leaf chains.
QUICK REFERENCE XIHU (WEST LAKE) DIS.
For Applications That Required Strong Flexible Linkage | Ideal for Lifting Applications | Specially Selected Steel | Unique Heat Treatment Process.
Leaf Chain is the most simple of steel chains, consisting only of link plates and pins. This chain generally has greater tensile strength than roller chains and runs over sheaves rather than sprockets. They are suitable for hanging, balancing or motion transmitting applications. Leaf chains are often used as counterweight chains for machine tools, elevator and oven doors, fork lift truck masts, spinning frames and similar lifting or balancing applications.
When you need a leaf chain to keep your project in balance, contact the experienced professionals at HangZhou Star Machine Technology Co., Ltd. If you’re not sure exactly what type or size of chain that you need, we have decades of experience working with customers to provide the ideal chain or sprocket to keep you moving. We have a full line of Leaf AL Series Chains as well as Leaf BL Series Chains.Plates are connected by pins and hold the tension loaded on the chain.
AL Type
Plate configuration and thickness are the same as ANSI G8 roller chain. Pin diameter is almost the same as ANSI G8 roller chain.
BL Type
BL Series leaf chains consist of link plates which are thicker and larger in contour than the AL Series link plates of the same pitch. The link plates have the same thickness as the link plates of the next larger pitch size in ANSI G8 roller chains. The pins have the same diameter as those of ANSI G8 roller chains of the next larger pitch.
WHY CHOOSE US
1. Reliable Quality Assurance System
2. Cutting-Edge Computer-Controlled CNC Machines
3. Bespoke Solutions from Highly Experienced Specialists
4. Customization and OEM Available for Specific Application
5. Extensive Inventory of Spare Parts and Accessories
6. Well-Developed CHINAMFG Marketing Network
7. Efficient After-Sale Service System
The 219 sets of advanced automatic production equipment provide guarantees for high product quality. The 167 engineers and technicians with senior professional titles can design and develop products to meet the exact demands of customers, and OEM customizations are also available with us. Our sound global service network can provide customers with timely after-sales technical services.
We are not just a manufacturer and supplier, but also an industry consultant. We work pro-actively with you to offer expert advice and product recommendations in order to end up with a most cost effective product available for your specific application. The clients we serve CHINAMFG range from end users to distributors and OEMs. Our OEM replacements can be substituted wherever necessary and suitable for both repair and new assemblies.
| Standard or Nonstandard: | Standard |
|---|---|
| Application: | Textile Machinery, Garment Machinery, Conveyer Equipment, Packaging Machinery, Electric Cars, Motorcycle, Food Machinery, Marine, Mining Equipment, Agricultural Machinery, Car |
| Surface Treatment: | Baking Paint, Polishing |
| Samples: |
US$ 10/Meter
1 Meter(Min.Order) | Order Sample |
|---|
| Customization: |
Available
| Customized Request |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Can car parking chains be integrated with access control systems, such as key cards or remote controls?
Yes, car parking chains can be integrated with access control systems, allowing for more efficient and convenient vehicle access in parking facilities. Integration with access control systems offers several benefits:
1. Key Cards: Parking chains can be linked to electronic access control systems that use key cards or RFID tags. Authorized users are provided with key cards that they can swipe or tap at the entrance to raise the chain, granting them access to the parking area.
2. Remote Controls: In automated parking chains, remote controls can be used to raise or lower the chains. This is particularly useful for parking attendants or personnel who can remotely manage vehicle access from a central location, reducing the need for physical presence at the entrance.
3. Electronic Passes: Some parking facilities issue electronic passes to authorized users. These passes can be read by sensors at the entrance, automatically raising the chain to allow access without the need for manual operation.
4. License Plate Recognition: Advanced access control systems may use license plate recognition technology to automatically identify and grant access to pre-registered vehicles as they approach the entrance, eliminating the need for physical cards or passes.
5. Time-Based Access: Access control systems can be configured to grant access only during specific times or days. This is particularly useful for parking facilities with restricted access hours or reserved parking spaces for certain users.
6. Enhanced Security: Integration with access control systems improves security by ensuring that only authorized vehicles can enter the parking area, reducing the risk of unauthorized access or parking violations.
7. Efficient Traffic Management: Automated access control systems can process vehicles more quickly, reducing waiting times and traffic congestion at the entrance during peak hours.
By integrating car parking chains with access control systems, parking facilities can enhance security, improve user experience, and efficiently manage vehicle access, making it a popular choice for modern parking facilities.
Are there any eco-friendly options for car parking chains, such as those made from recycled materials?
Yes, there are eco-friendly options available for car parking chains that promote sustainability and environmental responsibility. These options include:
1. Recycled Materials: Some manufacturers produce parking chains using recycled materials, such as recycled steel or other metals. Using recycled materials reduces the demand for new raw materials and helps minimize the environmental impact of production.
2. Biodegradable or Eco-Friendly Coatings: For parking chains that require protective coatings, eco-friendly options may include biodegradable or environmentally friendly coatings that are less harmful to the environment during application and disposal.
3. Alternative Materials: Apart from traditional metals, eco-friendly parking chains can be made from alternative materials like bamboo or other sustainable resources. These materials have a lower environmental footprint and are renewable.
4. Energy-Efficient Manufacturing: Some manufacturers employ energy-efficient manufacturing processes for parking chains, minimizing energy consumption and reducing greenhouse gas emissions.
5. Longevity and Durability: While not directly related to the materials used, designing parking chains for longevity and durability helps reduce the need for frequent replacements, which, in turn, reduces waste generation.
6. End-of-Life Recycling: Eco-friendly parking chains can be designed with consideration for ease of recycling at the end of their life cycle. This encourages proper disposal and recycling practices, reducing the amount of waste that ends up in landfills.
7. Environmental Certifications: Look for parking chain manufacturers that have obtained environmental certifications or adhere to sustainable production practices.
By choosing eco-friendly car parking chains, parking facility owners and operators can contribute to environmental conservation and sustainability efforts, aligning their operations with green initiatives and reducing their overall ecological impact.
What is a car parking chain, and how is it used in parking facilities and garages?
A car parking chain is a mechanical barrier used in parking facilities and garages to control vehicle access and prevent unauthorized entry. It consists of a sturdy metal chain suspended across the entrance or exit of a parking area.
The chain is connected to two sturdy posts or walls on either side of the entrance. When lowered, the chain obstructs the passage of vehicles, restricting their entry or exit. Conversely, when lifted, it allows authorized vehicles to pass through.
Parking chains are commonly used in places where a more sophisticated access control system like a gate or a barrier arm may not be necessary. They offer a simple and cost-effective solution for managing vehicle flow.
Typically, parking facility attendants or authorized personnel are responsible for controlling the car parking chain. They manually raise and lower the chain using a key or a specialized lock system.
In some cases, modern parking chains may be automated and integrated with access control systems. This can include keycard readers, electronic passes, or even remote-controlled mechanisms, making it more convenient for authorized users to enter and exit the parking area.
Overall, car parking chains serve as a physical deterrent to prevent unauthorized access and ensure better control over vehicle movement in parking facilities and garages.
“`
editor by CX 2023-10-26
China OEM DIN/ISO Ll Series Leaf-Chain for Stacker Forklift Car Parking Conveyor Transmission Parts
Product Description
| DIN/ISO Chain No. |
Pitch
P |
Plate lacing | Plate depth
h2max |
Plate thickness
Tmax |
Pin diameter
d2max |
Pin length
L |
Tensile strength
Qmin |
Average tensile strength Q0 |
Weight per meter q kg/m |
| LL1622 | 25.40 | 2×2 |
21.00
|
3.10
|
8.28
|
17.2 | 58.0/13182 | 76.3 | 1.52 |
| LL1644 | 4×4 | 29.6 | 116.0/26363 | 152.6 | 2.90 | ||||
| LL1666 | 6×6 | 42.4 | 174.0/39545 | 228.9 | 4.30 | ||||
| LL1688 | 8×8 | 54.9 | 232.0/52726 | 305.2 | 5.71 | ||||
| LL2571 | 31.75 | 2×2 |
26.40
|
3.70
|
10.19
|
20.1 | 95.0/21591 | 109.2 | 2.33 |
| LL2044 | 4×4 | 33.8 | 190.0/43182 | 218.5 | 4.40 | ||||
| LL2066 | 6×6 | 50.1 | 285.0/64773 | 324.6 | 6.79 | ||||
| LL2088 | 8×8 | 64.0 | 380.0/86363 | 435.1 | 8.90 | ||||
| LL2422 | 38.10 | 2×2 |
33.40
|
5.00
|
14.63
|
28.4 | 170.0/38363 | 195.5 | 4.47 |
| LL2444 | 4×4 | 46.3 | 340.0/77273 | 380.8 | 8.22 | ||||
| LL2466 | 6×6 | 66.4 | 510.0/115909 | 571.2 | 12.22 | ||||
| LL2488 | 8×8 | 86.6 | 680.0/154545 | 775.2 | 16.30 | ||||
| LL2822 | 44.45 | 2×2 |
37.08
|
6.00
|
15.90
|
32.2 | 200.0/45455 | 245.0 | 5.40 |
| LL2844 | 4×4 | 56.4 | 400.0/9 0571 | 490.0 | 10.53 | ||||
| LL2866 | 6×6 | 80.8 | 600.0/136363 | 735.0 | 15.68 | ||||
| LL2888 | 8×8 | 105.2 | 800.0/181818 | 980.0 | 20.83 | ||||
| LL3222 | 50.80 | 2×2 |
42.00
|
6.40
|
17.81
|
34.8 | 260.0/59091 | 291.2 | 6.39 |
| LL3244 | 4×4 | 60.6 | 520.0/118182 | 582.4 | 12.46 | ||||
| LL3266 | 6×6 | 86.4 | 780.0/177272 | 873.6 | 18.52 | ||||
| LL3288 | 8×8 | 112.2 | 1040.0/233970 | 1176.0 | 24.65 | ||||
| LL4571 | 63.50 | 2×2 |
52.76
|
8.00
|
22.89
|
42.2 | 360.0/81818 | 403.2 | 10.36 |
| LL4044 | 4×4 | 74.4 | 780.0/177273 | 873.6 | 20.22 | ||||
| LL4066 | 6×6 | 106.5 | 1080.0/245454 | 1209.6 | 30.07 | ||||
| LL4088 | 8×8 | 140.0 | 1440.0/323959 | 1747.2 | 39.98 | ||||
| LL4822 | 76.20 | 2×2 |
63.88
|
10.00
|
29.24
|
54.6 | 560.0/127272 | 627.2 | 15.94 |
| LL4844 | 4×4 | 92.6 | 1120.0/254545 | 1554.4 | 31.38 | ||||
| LL4866 | 6×6 | 133.4 | 1680.0/377953 | 1880.0 | 46.94 | ||||
| LL4888 | 8×8 | 174.2 | 2240.0/5571 | 2508.8 | 62.36 |
Leaf Chain
Leaf chains are known for their durability and high tensile strength. They are primarily used in lift device applications such as forklifts, lift trucks, and lift masts. These hard working chains handle the lifting and balancing of heavy loads with the use of sheaves instead of sprockets for guidance. One of the primary differences with leaf chain compared to roller chain is that it only consists of a series of stacked plates and pins, providing superior lifting strength.
Leaf Chains and Strength
Leaf chains are famous with engineers for their strength in materials handling, such as with forklifts, lift trucks, lift masts, straddle carriers, and other major works of civil engineering. Their long service life, high fatigue strength and maximum wear resistance make them the ideal solution for long-term projects that need to be both reliable and incredibly strong. The compact design of leaf chains allows them to fit well within a variety of systems. The key parts of a leaf chain include:
Link Plates: Close control of the plate dimensions allows for high fatigue strength and long service life.
Pins: The pins pass through the plates and are subject to shearing forces, while the plates articulate on the pins through rotation over the sheave.
Leaf Chain AL Series or Leaf Chain BL Series
The American National Standards Institute (ANSI) determines consensus standards for a wide range of products and processes in the U.S. that are also adopted worldwide. This regulatory body provides the chain industry with specifics around size and strength that govern the manufacture of different types of chains, including leaf chains and roller chains. While these standards do not often change, AL Series was removed from ANSI Standard in 1975. The newer edition of the standard is BL Series, which replaced the AL Series. AL and BL Series are dimensionally different. BL Series has a higher tensile strength than AL Series and is more commonly used today. However, older machinery may still use the AL Series of leaf chain, which is still offered by HangZhou Star Machine Technology Co., Ltd. in a variety of different sizes.
Leaf chains are built of interlaced plates held together by rivet pins. They are built with the same high degree of precision as our roller chains. HKK Leaf chains are used for applications that require strong flexible linkage for transmitting motion or lift. Specially selected steel and unique heat treatment assures high strength and durability. The first number or numbers in leaf chains identifies the chain pitch, the last 2 numbers identify the chain’s lacing. New applications should use BL series leaf chains.
QUICK REFERENCE XIHU (WEST LAKE) DIS.
For Applications That Required Strong Flexible Linkage | Ideal for Lifting Applications | Specially Selected Steel | Unique Heat Treatment Process.
Leaf Chain is the most simple of steel chains, consisting only of link plates and pins. This chain generally has greater tensile strength than roller chains and runs over sheaves rather than sprockets. They are suitable for hanging, balancing or motion transmitting applications. Leaf chains are often used as counterweight chains for machine tools, elevator and oven doors, fork lift truck masts, spinning frames and similar lifting or balancing applications.
When you need a leaf chain to keep your project in balance, contact the experienced professionals at HangZhou Star Machine Technology Co., Ltd. If you’re not sure exactly what type or size of chain that you need, we have decades of experience working with customers to provide the ideal chain or sprocket to keep you moving. We have a full line of Leaf AL Series Chains as well as Leaf BL Series Chains.Plates are connected by pins and hold the tension loaded on the chain.
AL Type
Plate configuration and thickness are the same as ANSI G8 roller chain. Pin diameter is almost the same as ANSI G8 roller chain.
BL Type
BL Series leaf chains consist of link plates which are thicker and larger in contour than the AL Series link plates of the same pitch. The link plates have the same thickness as the link plates of the next larger pitch size in ANSI G8 roller chains. The pins have the same diameter as those of ANSI G8 roller chains of the next larger pitch.
WHY CHOOSE US
1. Reliable Quality Assurance System
2. Cutting-Edge Computer-Controlled CNC Machines
3. Bespoke Solutions from Highly Experienced Specialists
4. Customization and OEM Available for Specific Application
5. Extensive Inventory of Spare Parts and Accessories
6. Well-Developed CHINAMFG Marketing Network
7. Efficient After-Sale Service System
The 219 sets of advanced automatic production equipment provide guarantees for high product quality. The 167 engineers and technicians with senior professional titles can design and develop products to meet the exact demands of customers, and OEM customizations are also available with us. Our sound global service network can provide customers with timely after-sales technical services.
We are not just a manufacturer and supplier, but also an industry consultant. We work pro-actively with you to offer expert advice and product recommendations in order to end up with a most cost effective product available for your specific application. The clients we serve CHINAMFG range from end users to distributors and OEMs. Our OEM replacements can be substituted wherever necessary and suitable for both repair and new assemblies.
| Standard or Nonstandard: | Standard |
|---|---|
| Application: | Textile Machinery, Garment Machinery, Conveyer Equipment, Packaging Machinery, Electric Cars, Motorcycle, Food Machinery, Marine, Mining Equipment, Agricultural Machinery, Car |
| Surface Treatment: | Baking Paint, Polishing |
| Samples: |
US$ 10/Meter
1 Meter(Min.Order) | Order Sample |
|---|
| Customization: |
Available
| Customized Request |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
What are the common issues and troubleshooting tips for car parking chains, such as jamming or misalignment?
Car parking chains, like any mechanical system, may encounter various issues over time. Here are some common problems and troubleshooting tips to address them:
1. Jamming:
– Troubleshooting: If the chain becomes jammed and doesn’t move smoothly, inspect the chain links and the surrounding area for any obstructions or debris that may be causing the jam. Clean the chain and the chain path to ensure smooth movement.
– Prevention: Regularly clean and lubricate the chain to prevent dirt or debris buildup that could lead to jamming.
2. Misalignment:
– Troubleshooting: If the chain appears misaligned or is not moving along its intended path, check the chain’s tension and alignment. Adjust the tension or realign the chain as necessary to ensure proper movement.
– Prevention: Periodically inspect and adjust the chain tension and alignment to prevent misalignment issues.
3. Chain Damage:
– Troubleshooting: Inspect the chain for any signs of damage, such as bent links or broken sections. Replace damaged chain links or sections promptly.
– Prevention: Use parking chains made from durable materials like steel or stainless steel to minimize the risk of chain damage. Avoid overloading the chain with excessive weight.
4. Stuck Chain:
– Troubleshooting: If the chain gets stuck in the raised or lowered position, check for any obstructions or issues with the chain mechanism. Address the problem and reset the chain to its proper position.
– Prevention: Regularly inspect and maintain the chain mechanism to prevent it from getting stuck due to mechanical issues.
5. Chain Corrosion:
– Troubleshooting: If the chain is made from a material susceptible to corrosion, such as steel, check for signs of rust. Treat the affected areas and consider applying protective coatings to prevent further corrosion.
– Prevention: Use materials with good corrosion resistance, like stainless steel or aluminum, or consider using eco-friendly options like recycled materials to reduce the risk of chain corrosion.
By addressing these common issues and following proper maintenance practices, parking facility managers can ensure that car parking chains operate smoothly and reliably, minimizing disruptions and providing an efficient access control solution for users.
Are there any regulations or guidelines regarding the installation and use of car parking chains in public and private parking lots?
Yes, the installation and use of car parking chains in public and private parking lots are subject to various regulations and guidelines to ensure safety, accessibility, and compliance with local laws. Here are some common considerations:
1. Building Codes and Zoning Regulations: Before installing parking chains, property owners or operators must comply with local building codes and zoning regulations that dictate the types of barriers and access control mechanisms allowed in specific areas.
2. Accessibility Requirements: Parking facilities, including those using parking chains, must comply with accessibility standards, ensuring that they are accessible to individuals with disabilities. This may involve providing designated accessible parking spaces and ensuring barrier-free access to the facility.
3. Height and Clearance: There are often regulations regarding the height of parking chains to prevent them from interfering with vehicles and causing damage. Adequate clearance must be maintained to ensure smooth entry and exit of vehicles.
4. Visibility and Signage: Proper signage should be displayed to inform users about the parking control system in place and to direct them on how to operate it. Adequate lighting should also be provided to ensure good visibility, especially during low-light conditions.
5. Safety Measures: Safety should be a priority when installing parking chains. This includes ensuring that the chain and its supports are securely anchored to prevent accidents or unauthorized removal.
6. Fire Safety Regulations: In certain areas, there may be specific fire safety regulations that dictate the use of specific materials or the inclusion of fire lanes for emergency vehicle access.
7. Permits and Approvals: Depending on the location and local regulations, obtaining permits and approvals from relevant authorities may be necessary before installing parking chains.
8. Compliance with Industry Standards: Manufacturers and installers of parking chains should ensure that their products meet industry standards for quality, durability, and safety.
It is essential for property owners, facility managers, and operators to familiarize themselves with the specific regulations and guidelines in their area and to work with reputable suppliers and installers to ensure compliance and the safe and effective use of car parking chains.
What are the benefits of using a car parking chain compared to other parking control methods?
Car parking chains offer several advantages over other parking control methods:
- Cost-effectiveness: Parking chains are generally more affordable to install and maintain compared to more complex systems like automated gates or barrier arms.
- Simplicity: They provide a straightforward and easy-to-understand method for controlling vehicle access, requiring minimal training for attendants or personnel.
- Durability: Made from sturdy metal materials, parking chains are robust and can withstand various weather conditions and potential wear and tear.
- Flexibility: Parking chains can be used in various locations, including small parking lots, private driveways, or temporary event spaces, where a permanent gate system may not be feasible.
- Manual and Automated Options: Depending on the setup, parking chains can be operated manually by attendants or automated using electronic access control systems, offering convenience for users.
- Visual Deterrent: The presence of a chain across the entrance acts as a visual deterrent, dissuading unauthorized vehicles from attempting to enter the parking area.
While car parking chains are advantageous in many situations, they may not be suitable for high-traffic areas or locations where more sophisticated access control is necessary for security reasons. In such cases, other methods like automated gates, barrier arms, or ticket-based systems may be more appropriate.
“`
editor by CX 2023-10-25
China Good quality Conveyor Chain Industrial Leaf Stainless/Carbon Steel Chain Transmission Chain Car Parking Hoisting Al844
Product Description
Product Description
1. Leaf chain conform to ISO, BS, JS and other standards
2. Mainly BL, AL, LL, FL series leaf chain
3. Our leaf chain customization service can be provided according to customer requirements
4. The leaf chain is made of high quality material and heat treatment technology.
5. The products are widely used in forklifts, textile machinery, drilling rigs, etc. to achieve vertical lifting, horizontal traction and other uses.
Available materials
1,Stainless steel: stainless steel 304, 316, etc.
2. Alloy steel: 45 Mn, 42 CrMo, 20CrMo, etc.
OEM according to your requirements
Surface treatment: polished, galvanized, nickel-plated, etc.
Design standard: ISO DIN ANSI according to customer’s drawing requirement
Certificate: ISO9001:2008
Leaf chain structure
Leaf chain consists of chain plate and pin only. The chain plates are connected by pins to carry the tension on the chain plates. The outer chain plate is overfitted with the pin and the pin is riveted.
The inner chain plate, middle chain plate and pin are sliding fit.
Scope of Application
The plate chain is widely used in forklift, textile machinery, traction, tensioning chain, etc.
Product Attribute
|
Usage |
Transmission Chain |
|
Material |
Alloy/Carbon Steel |
|
Surface Treatment |
Galvanized / nickel plated / stainless steel / carbon steel |
|
Feature |
Heat Resistant |
|
Chain Size |
1/2″*3/32″ |
|
Structure |
Leaf Chain |
|
Color |
Solid Color |
|
Structure (for Chain) |
Roller Chain |
| Port |
ZheJiang |
| Payment |
L/C, T/T, D/P, Western Union |
| Package |
Carton, Wooden Case |
Detailed Photos
Product Parameters
Our Advantages
Company Advantages:
Own Import & Export License, The TV trade mark registered successfully in many countries, Sales network spread all over China, Products export to 65 countries in 5 continents.
Membership:
1. The member of China General Machine Components Industry Association.
2. The member of China Chain Transmission Association.
3. The member of China Chain Standardization Association.
4. The member of China Agricultural Association Machinery Manufacturers.
With our excellent trained staffs and workers, advanced and efficient equipments, completely sales network, strict QA systems. You are confidence that our premium qualified chain can meet all customers’ specification and strictest quality standards.
Please do not hesitate to contact us for more information on how TransVision products can meet your industries demands at highly competitive pricing.
Quality First, Clients Uppermost.
Product Categories
| WHY CHOOSE US |
Comprehensive Product Portfolio We produce and supply a wide range of power transmission
products including drive chains, leaf chains, conveyor chains, agricultural chains, sprockets, and
couplings. This one-store-for-all shopping experience will significantly reduce your searching costs while
guarantee youfind what you want at 1 click.
Value Choice Products Our products are the best combination of quality and price, and you get what
you want within your budgets
Seasoned Sales Associates and Engineers We have 15 seasoned sales associates and 5 engineers;
on our team at your disposal any time when you need a helping hand. They are well trained with industry
know-now and will always respond to your requests within 24 hours.
100% Customer Retention Rate Our regular customers from overseas come back not just for our
premium quality products, but for the superior services that we’ve provided over the years.
| FAQ |
| Q1: What’s your average lead time? A: It varies. Our regular end-to-end lead time is 1-2 months.. We also provide express shipments for rush orders. For details,please consult our sales associate. Q2: Is your price better than your competitors given the same quality? Q4: Can we inspect the goods before shipment? Q5: What kind of payment method is acceptable for your mill? Q6: What if I have any other questions? |
| Usage: | Transmission Chain, Conveyor Chain |
|---|---|
| Material: | Alloy |
| Surface Treatment: | Electroplating |
| Samples: |
US$ 2/Piece
1 Piece(Min.Order) | Order Sample |
|---|
| Customization: |
Available
| Customized Request |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
What are the common issues and troubleshooting tips for car parking chains, such as jamming or misalignment?
Car parking chains, like any mechanical system, may encounter various issues over time. Here are some common problems and troubleshooting tips to address them:
1. Jamming:
– Troubleshooting: If the chain becomes jammed and doesn’t move smoothly, inspect the chain links and the surrounding area for any obstructions or debris that may be causing the jam. Clean the chain and the chain path to ensure smooth movement.
– Prevention: Regularly clean and lubricate the chain to prevent dirt or debris buildup that could lead to jamming.
2. Misalignment:
– Troubleshooting: If the chain appears misaligned or is not moving along its intended path, check the chain’s tension and alignment. Adjust the tension or realign the chain as necessary to ensure proper movement.
– Prevention: Periodically inspect and adjust the chain tension and alignment to prevent misalignment issues.
3. Chain Damage:
– Troubleshooting: Inspect the chain for any signs of damage, such as bent links or broken sections. Replace damaged chain links or sections promptly.
– Prevention: Use parking chains made from durable materials like steel or stainless steel to minimize the risk of chain damage. Avoid overloading the chain with excessive weight.
4. Stuck Chain:
– Troubleshooting: If the chain gets stuck in the raised or lowered position, check for any obstructions or issues with the chain mechanism. Address the problem and reset the chain to its proper position.
– Prevention: Regularly inspect and maintain the chain mechanism to prevent it from getting stuck due to mechanical issues.
5. Chain Corrosion:
– Troubleshooting: If the chain is made from a material susceptible to corrosion, such as steel, check for signs of rust. Treat the affected areas and consider applying protective coatings to prevent further corrosion.
– Prevention: Use materials with good corrosion resistance, like stainless steel or aluminum, or consider using eco-friendly options like recycled materials to reduce the risk of chain corrosion.
By addressing these common issues and following proper maintenance practices, parking facility managers can ensure that car parking chains operate smoothly and reliably, minimizing disruptions and providing an efficient access control solution for users.
How do I choose the right car parking chain for my parking facility based on traffic volume and vehicle types?
Choosing the right car parking chain for your parking facility involves considering the traffic volume and types of vehicles that will use the facility. Here are the key factors to consider:
1. Traffic Volume:
– For high-traffic areas with a significant number of vehicles entering and exiting frequently, consider a durable and heavy-duty parking chain made from materials like steel or stainless steel. These materials can withstand the wear and tear associated with frequent use.
– For low-traffic areas or temporary parking setups, lighter materials like plastic or PVC chains may be suitable as they are more cost-effective.
2. Vehicle Types:
– For standard passenger cars and small vehicles, most parking chains should be sufficient. However, consider the length of the chain to accommodate wider entry points.
– For larger vehicles, such as trucks or buses, ensure that the parking chain is robust enough to support their weight and size. Opt for heavy-duty chains with thicker links and higher load-bearing capacity.
3. Manual vs. Automatic:
– Manual parking chains operated by attendants may be suitable for smaller parking facilities with moderate traffic. They offer a cost-effective and simple access control solution.
– Automatic parking chains integrated with electronic access control systems are more suitable for larger parking facilities or those with high traffic volume. They provide faster and more efficient access control, minimizing waiting times.
4. Customization:
– Consider whether you require customized parking chains to fit specific dimensions or to align with the overall aesthetic of the parking facility.
5. Environmental Factors:
– For outdoor parking facilities exposed to harsh weather conditions, opt for materials that offer good corrosion resistance, such as stainless steel or aluminum.
6. Budget:
– Determine the budget available for the parking chains, considering both the initial investment and long-term maintenance costs.
7. Compliance:
– Ensure that the chosen parking chains comply with local regulations and accessibility requirements to provide a safe and accessible parking environment.
By carefully evaluating these factors, you can select the most appropriate car parking chain that aligns with your parking facility’s specific needs, ensuring efficient access control and a positive user experience for all vehicle types and traffic volumes.
What is a car parking chain, and how is it used in parking facilities and garages?
A car parking chain is a mechanical barrier used in parking facilities and garages to control vehicle access and prevent unauthorized entry. It consists of a sturdy metal chain suspended across the entrance or exit of a parking area.
The chain is connected to two sturdy posts or walls on either side of the entrance. When lowered, the chain obstructs the passage of vehicles, restricting their entry or exit. Conversely, when lifted, it allows authorized vehicles to pass through.
Parking chains are commonly used in places where a more sophisticated access control system like a gate or a barrier arm may not be necessary. They offer a simple and cost-effective solution for managing vehicle flow.
Typically, parking facility attendants or authorized personnel are responsible for controlling the car parking chain. They manually raise and lower the chain using a key or a specialized lock system.
In some cases, modern parking chains may be automated and integrated with access control systems. This can include keycard readers, electronic passes, or even remote-controlled mechanisms, making it more convenient for authorized users to enter and exit the parking area.
Overall, car parking chains serve as a physical deterrent to prevent unauthorized access and ensure better control over vehicle movement in parking facilities and garages.
“`
editor by CX 2023-10-24
China manufacturer Car Parking Hoisting Conveyor Transmission ANSI Al-1466 Leaf Chain
Product Description
Leaf Chain
Leaf chains are known for their durability and high tensile strength. They are primarily used in lift device applications such as forklifts, lift trucks, and lift masts. These hard working chains handle the lifting and balancing of heavy loads with the use of sheaves instead of sprockets for guidance. One of the primary differences with leaf chain compared to roller chain is that it only consists of a series of stacked plates and pins, providing superior lifting strength.
Leaf Chains and Strength
Leaf chains are famous with engineers for their strength in materials handling, such as with forklifts, lift trucks, lift masts, straddle carriers, and other major works of civil engineering. Their long service life, high fatigue strength and maximum wear resistance make them the ideal solution for long-term projects that need to be both reliable and incredibly strong. The compact design of leaf chains allows them to fit well within a variety of systems. The key parts of a leaf chain include:
Link Plates: Close control of the plate dimensions allows for high fatigue strength and long service life.
Pins: The pins pass through the plates and are subject to shearing forces, while the plates articulate on the pins through rotation over the sheave.
Leaf Chain AL Series or Leaf Chain BL Series
The American National Standards Institute (ANSI) determines consensus standards for a wide range of products and processes in the U.S. that are also adopted worldwide. This regulatory body provides the chain industry with specifics around size and strength that govern the manufacture of different types of chains, including leaf chains and roller chains. While these standards do not often change, AL Series was removed from ANSI Standard in 1975. The newer edition of the standard is BL Series, which replaced the AL Series. AL and BL Series are dimensionally different. BL Series has a higher tensile strength than AL Series and is more commonly used today. However, older machinery may still use the AL Series of leaf chain, which is still offered by HangZhou Star Machine Technology Co., Ltd. in a variety of different sizes.
When you need a leaf chain to keep your project in balance, contact the experienced professionals at HangZhou Star Machine Technology Co., Ltd. If you’re not sure exactly what type or size of chain that you need, we have decades of experience working with customers to provide the ideal chain or sprocket to keep you moving. We have a full line of Leaf AL Series Chains as well as Leaf BL Series Chains.
| Chain No. |
Assembly |
Pitch A |
Pin Dia. D |
Plate | Overall Width | Maximum Allowable Load (lbs) |
Average Ultimate Strength (lbs) |
Average Weight Per Foot (lbs) Riveted |
||
| Height H |
Thickness T |
E | ||||||||
| AL Series | ||||||||||
| AL-1466 | 6X6 | 1 – 3/4 | 0.500 | 1.390 | 0.218 | 2.93 | 10,300 | 124,000 | 9.83 | |
Leaf chains are built of interlaced plates held together by rivet pins. They are built with the same high degree of precision as our roller chains. HKK Leaf chains are used for applications that require strong flexible linkage for transmitting motion or lift. Specially selected steel and unique heat treatment assures high strength and durability. The first number or numbers in leaf chains identifies the chain pitch, the last 2 numbers identify the chain’s lacing. New applications should use BL series leaf chains.
QUICK REFERENCE XIHU (WEST LAKE) DIS.
Leaf Chain is the most simple of steel chains, consisting only of link plates and pins. This chain generally has greater tensile strength than roller chains and runs over sheaves rather than sprockets. They are suitable for hanging, balancing or motion transmitting applications. Leaf chains are often used as counterweight chains for machine tools, elevator and oven doors, fork lift truck masts, spinning frames and similar lifting or balancing applications.
Plates are connected by pins and hold the tension loaded on the chain.
AL Type
Plate configuration and thickness are the same as ANSI G8 roller chain. Pin diameter is almost the same as ANSI G8 roller chain.
BL Type
BL Series leaf chains consist of link plates which are thicker and larger in contour than the AL Series link plates of the same pitch. The link plates have the same thickness as the link plates of the next larger pitch size in ANSI G8 roller chains. The pins have the same diameter as those of ANSI G8 roller chains of the next larger pitch.
For Applications That Required Strong Flexible Linkage | Ideal for Lifting Applications | Specially Selected Steel | Unique Heat Treatment Process
WHY CHOOSE US
1. Reliable Quality Assurance System
2. Cutting-Edge Computer-Controlled CNC Machines
3. Bespoke Solutions from Highly Experienced Specialists
4. Customization and OEM Available for Specific Application
5. Extensive Inventory of Spare Parts and Accessories
6. Well-Developed CHINAMFG Marketing Network
7. Efficient After-Sale Service System
The 219 sets of advanced automatic production equipment provide guarantees for high product quality. The 167 engineers and technicians with senior professional titles can design and develop products to meet the exact demands of customers, and OEM customizations are also available with us. Our sound global service network can provide customers with timely after-sales technical services.
We are not just a manufacturer and supplier, but also an industry consultant. We work pro-actively with you to offer expert advice and product recommendations in order to end up with a most cost effective product available for your specific application. The clients we serve CHINAMFG range from end users to distributors and OEMs. Our OEM replacements can be substituted wherever necessary and suitable for both repair and new assemblies.
| Standard or Nonstandard: | Standard |
|---|---|
| Application: | Textile Machinery, Garment Machinery, Conveyer Equipment, Packaging Machinery, Electric Cars, Motorcycle, Food Machinery, Marine, Mining Equipment, Agricultural Machinery, Car, Textile Machinery, Garment Machinery, Conveyer Equipment, Packaging Machinery, Electric Cars, Motorcycle, Food Machinery, Marine, Mining Equipment, Agricultural Machinery, Car |
| Surface Treatment: | Baking Paint, Polishing |
| Structure: | Tooth Chain, Leaf Chain |
| Material: | 40mn, Alloy |
| Type: | Variable Speed Chain, Cranked Link Chain, Short Pitch Chain |
| Samples: |
US$ 10/Meter
1 Meter(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
Can car parking chains be retrofitted into existing parking facilities to upgrade their security measures?
Yes, car parking chains can be retrofitted into existing parking facilities to upgrade their security measures and access control. Retrofitting parking chains is a practical and cost-effective solution for improving security without the need for major infrastructure changes. Here’s how it can be done:
1. Site Assessment: Conduct a thorough site assessment to identify suitable locations for installing the parking chains. Consider factors such as traffic flow, vehicle types, and entry/exit points.
2. Choose the Right Chains: Select parking chains that are compatible with the existing facility and meet the security requirements. Consider factors like traffic volume, weather resistance, and automation options.
3. Anchor Points: Identify and prepare sturdy anchor points on either side of the entrance or exit where the chains will be installed. Ensure the anchors are securely attached to the ground or wall.
4. Installation: Install the parking chains according to the manufacturer’s instructions, ensuring proper tension and alignment. Consider automatic systems for smoother access control.
5. Integration with Access Control: If using automated parking chains, integrate them with access control systems like key cards, remote controls, or license plate recognition technology.
6. Signage: Install clear signage to inform users about the presence of parking chains and how to operate them.
7. Testing: Test the parking chains’ movement to ensure they raise and lower smoothly without obstructions or jams.
8. Training: Provide training to parking attendants or personnel responsible for operating the chains to ensure proper use and maintenance.
9. Regular Maintenance: Develop a maintenance schedule and conduct regular inspections to keep the parking chains in good working condition.
10. Consider Advanced Features: Depending on the facility’s requirements, consider retrofitting smart parking chains with advanced features like mobile app integration or reservation systems for enhanced security and convenience.
Retrofitting car parking chains allows existing parking facilities to upgrade their security measures efficiently, enhancing access control and providing a safer parking environment for users.
What are the safety features of car parking chains to prevent accidents and injuries?
Car parking chains are designed with several safety features to prevent accidents and injuries. These features ensure that the chains operate safely and effectively, protecting both vehicles and users. Some common safety features include:
1. Reflective Elements: Many parking chains have reflective coatings or materials to enhance visibility, especially during low-light conditions. This makes the chains more noticeable to drivers and pedestrians, reducing the risk of collisions.
2. Smooth and Even Surface: Parking chains are manufactured with smooth and even surfaces to prevent any sharp edges or protrusions that could cause injuries or damage to vehicles.
3. Clear Signage: Proper signage is placed near the parking chains to inform users of their presence and how to operate them. This helps prevent confusion and misuse.
4. Low Friction: Chains are often lubricated to reduce friction and ensure smooth movement, minimizing the risk of accidents caused by chain jams or abrupt stops.
5. Emergency Access: Parking chains are designed with emergency access in mind. In manual systems, there are quick-release mechanisms to allow easy removal of the chain in emergency situations or to facilitate access for emergency vehicles.
6. Height and Clearance: Proper clearance is maintained to prevent chains from interfering with vehicles or causing damage during entry or exit.
7. Secure Mounting: Parking chains are securely mounted to prevent accidental detachment or falling, especially in retractable systems.
8. Load Capacity: For automatic systems, parking chains are designed to handle the weight of vehicles passing through, ensuring they can safely support the load.
9. Regular Maintenance: Regular inspections and maintenance help identify any safety issues and address them promptly, ensuring the chains remain safe for use.
10. Training and Education: Parking attendants and users should receive proper training on how to operate the parking chains safely and effectively.
By incorporating these safety features and promoting responsible use, car parking chains can effectively prevent accidents and injuries, providing a secure and controlled parking environment for all users.
Can car parking chains be customized to fit specific parking space dimensions?
Yes, car parking chains can be customized to fit specific parking space dimensions. Manufacturers often offer customization options to cater to the unique requirements of different parking facilities. Here’s how parking chains can be customized:
1. Length Adjustment: Parking chains can be made to the exact length needed to span across the width of the entrance or exit of a specific parking space. This ensures a proper fit without any excess chain length that could lead to tangling or inconvenience.
2. Chain Link Size: The diameter and thickness of the individual chain links can be adjusted to match the desired strength and aesthetic preferences. Thicker links may be chosen for heavy-duty applications, while thinner links can be used for lighter traffic areas.
3. Color Options: Customization may extend to the color of the parking chain, with some manufacturers offering various color coatings or finishes to suit the parking facility’s design or branding requirements.
4. Retractable Mechanism: For parking areas that require flexible access control, parking chains can be integrated with retractable mechanisms, allowing them to be raised or lowered as needed.
5. Personalized Branding: In some cases, parking chains can be customized with logos or branding elements, particularly for commercial or corporate parking facilities.
6. Material and Coating: While most parking chains are made from steel for durability, specialized materials or coatings can be considered for unique environments, such as coastal areas with high corrosion potential.
Keep in mind that while customization offers tailored solutions, it may also affect the cost and lead time for manufacturing the parking chains. It’s essential to work with reputable manufacturers or suppliers who can provide guidance on the best customization options based on the specific needs of the parking facility.
editor by CX 2023-10-21
China Professional ANSI Al-1266 Leaf Chain Forklift Truck Stacker Car Parking Hoisting
Product Description
Leaf Chain
Leaf chains are known for their durability and high tensile strength. They are primarily used in lift device applications such as forklifts, lift trucks, and lift masts. These hard working chains handle the lifting and balancing of heavy loads with the use of sheaves instead of sprockets for guidance. One of the primary differences with leaf chain compared to roller chain is that it only consists of a series of stacked plates and pins, providing superior lifting strength.
Leaf Chains and Strength
Leaf chains are famous with engineers for their strength in materials handling, such as with forklifts, lift trucks, lift masts, straddle carriers, and other major works of civil engineering. Their long service life, high fatigue strength and maximum wear resistance make them the ideal solution for long-term projects that need to be both reliable and incredibly strong. The compact design of leaf chains allows them to fit well within a variety of systems. The key parts of a leaf chain include:
Link Plates: Close control of the plate dimensions allows for high fatigue strength and long service life.
Pins: The pins pass through the plates and are subject to shearing forces, while the plates articulate on the pins through rotation over the sheave.
Leaf Chain AL Series or Leaf Chain BL Series
The American National Standards Institute (ANSI) determines consensus standards for a wide range of products and processes in the U.S. that are also adopted worldwide. This regulatory body provides the chain industry with specifics around size and strength that govern the manufacture of different types of chains, including leaf chains and roller chains. While these standards do not often change, AL Series was removed from ANSI Standard in 1975. The newer edition of the standard is BL Series, which replaced the AL Series. AL and BL Series are dimensionally different. BL Series has a higher tensile strength than AL Series and is more commonly used today. However, older machinery may still use the AL Series of leaf chain, which is still offered by HangZhou Star Machine Technology Co., Ltd. in a variety of different sizes.
When you need a leaf chain to keep your project in balance, contact the experienced professionals at HangZhou Star Machine Technology Co., Ltd. If you’re not sure exactly what type or size of chain that you need, we have decades of experience working with customers to provide the ideal chain or sprocket to keep you moving. We have a full line of Leaf AL Series Chains as well as Leaf BL Series Chains.
| Chain No. |
Assembly |
Pitch A |
Pin Dia. D |
Plate | Overall Width | Maximum Allowable Load (lbs) |
Average Ultimate Strength (lbs) |
Average Weight Per Foot (lbs) Riveted |
||
| Height H |
Thickness T |
E | ||||||||
| AL Series | ||||||||||
| AL-1266 | 6X6 | 1 – 1/2 | 0.437 | 1.193 | 0.187 | 2.50 | 7,670 | 96,700 | 6.81 | |
Leaf chains are built of interlaced plates held together by rivet pins. They are built with the same high degree of precision as our roller chains. HKK Leaf chains are used for applications that require strong flexible linkage for transmitting motion or lift. Specially selected steel and unique heat treatment assures high strength and durability. The first number or numbers in leaf chains identifies the chain pitch, the last 2 numbers identify the chain’s lacing. New applications should use BL series leaf chains.
QUICK REFERENCE XIHU (WEST LAKE) DIS.
Leaf Chain is the most simple of steel chains, consisting only of link plates and pins. This chain generally has greater tensile strength than roller chains and runs over sheaves rather than sprockets. They are suitable for hanging, balancing or motion transmitting applications. Leaf chains are often used as counterweight chains for machine tools, elevator and oven doors, fork lift truck masts, spinning frames and similar lifting or balancing applications.
Plates are connected by pins and hold the tension loaded on the chain.
AL Type
Plate configuration and thickness are the same as ANSI G8 roller chain. Pin diameter is almost the same as ANSI G8 roller chain.
BL Type
BL Series leaf chains consist of link plates which are thicker and larger in contour than the AL Series link plates of the same pitch. The link plates have the same thickness as the link plates of the next larger pitch size in ANSI G8 roller chains. The pins have the same diameter as those of ANSI G8 roller chains of the next larger pitch.
For Applications That Required Strong Flexible Linkage | Ideal for Lifting Applications | Specially Selected Steel | Unique Heat Treatment Process
WHY CHOOSE US
1. Reliable Quality Assurance System
2. Cutting-Edge Computer-Controlled CNC Machines
3. Bespoke Solutions from Highly Experienced Specialists
4. Customization and OEM Available for Specific Application
5. Extensive Inventory of Spare Parts and Accessories
6. Well-Developed CHINAMFG Marketing Network
7. Efficient After-Sale Service System
The 219 sets of advanced automatic production equipment provide guarantees for high product quality. The 167 engineers and technicians with senior professional titles can design and develop products to meet the exact demands of customers, and OEM customizations are also available with us. Our sound global service network can provide customers with timely after-sales technical services.
We are not just a manufacturer and supplier, but also an industry consultant. We work pro-actively with you to offer expert advice and product recommendations in order to end up with a most cost effective product available for your specific application. The clients we serve CHINAMFG range from end users to distributors and OEMs. Our OEM replacements can be substituted wherever necessary and suitable for both repair and new assemblies.
| Standard or Nonstandard: | Standard |
|---|---|
| Application: | Textile Machinery, Garment Machinery, Conveyer Equipment, Packaging Machinery, Electric Cars, Motorcycle, Food Machinery, Marine, Mining Equipment, Agricultural Machinery, Car |
| Surface Treatment: | Baking Paint, Polishing |
| Samples: |
US$ 10/Meter
1 Meter(Min.Order) | Order Sample |
|---|
| Customization: |
Available
| Customized Request |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Are there any cost-effective options for car parking chains without compromising on quality and reliability?
Yes, there are cost-effective options for car parking chains that still offer good quality and reliability. While premium materials like stainless steel may be more expensive, several alternatives provide a balance between affordability and performance. Here are some cost-effective options:
1. Galvanized Steel: Galvanized steel chains are coated with a layer of zinc to enhance their corrosion resistance. They are more affordable than stainless steel chains while still offering decent durability and weather resistance.
2. Plastic or PVC Chains: Plastic or PVC chains are often more budget-friendly than metal chains. While they may not be as durable as steel, they can be suitable for low-traffic areas or temporary parking setups.
3. Chain Accessories: Some manufacturers offer cost-effective chain accessories, such as chain hooks, connectors, and tensioners, without compromising on quality. These accessories are essential for proper chain installation and maintenance.
4. Recycled Materials: Some parking chains are made from recycled materials, which can be a cost-effective and eco-friendly option. Recycled steel or other materials can still offer satisfactory performance while reducing the demand for new resources.
5. Long-Lasting Materials: Investing in parking chains made from durable materials, even if slightly more expensive upfront, can be cost-effective in the long run. Chains that last longer and require less frequent replacement can result in cost savings over time.
6. Warranty and Support: Look for suppliers that offer warranties and reliable customer support. A good warranty can provide peace of mind and ensure you get the most value from your investment.
7. Buy in Bulk: If you need multiple parking chains, purchasing in bulk can often lead to discounts or cost savings.
When seeking cost-effective options for car parking chains, consider your specific needs and the expected usage of the chains. It’s essential to strike a balance between affordability and performance, ensuring that the chosen chains meet safety and reliability requirements for your parking facility.
What are the maintenance requirements for car parking chains to ensure smooth operation over time?
Regular maintenance is essential to ensure the smooth operation and longevity of car parking chains. Proper care and attention will help prevent malfunctions and ensure reliable access control in parking facilities. Here are the key maintenance requirements:
1. Cleaning: Regularly clean the parking chains to remove dirt, dust, and debris that can accumulate over time. Clean chains ensure smooth movement and prevent unnecessary wear.
2. Lubrication: Apply appropriate lubrication to the chain links and any moving parts of the chain mechanism. Lubrication reduces friction and wear, allowing the chain to move smoothly.
3. Inspection: Conduct routine inspections of the parking chains to identify any signs of wear, damage, or misalignment. Promptly address any issues to prevent further damage and ensure optimal performance.
4. Adjustments: Check the tension and alignment of the chains regularly. Make necessary adjustments to ensure the chain remains properly tensioned and aligned.
5. Replacement of Worn Parts: If any components of the parking chain show significant wear or damage, replace them promptly to maintain the chain’s integrity and functionality.
6. Weather Protection: Apply protective coatings or paint to steel chains to minimize the impact of weather elements and reduce the risk of corrosion.
7. Addressing Corrosion: For chains made of materials susceptible to corrosion, such as steel, regularly inspect for signs of rust and treat affected areas to prevent further corrosion.
8. Preventing Obstructions: Ensure that the area around the parking chains is clear of any obstacles that could hinder their movement or cause damage.
9. Training and Education: Train parking attendants or personnel responsible for operating the parking chains to handle them properly and conduct basic maintenance tasks.
10. Regular Testing: Periodically test the raising and lowering mechanism of the parking chains to verify that they are functioning correctly.
By adhering to these maintenance requirements, parking facility managers can ensure the smooth operation and reliability of car parking chains, minimizing downtime and ensuring efficient access control for vehicles in the long run.
What are the benefits of using a car parking chain compared to other parking control methods?
Car parking chains offer several advantages over other parking control methods:
- Cost-effectiveness: Parking chains are generally more affordable to install and maintain compared to more complex systems like automated gates or barrier arms.
- Simplicity: They provide a straightforward and easy-to-understand method for controlling vehicle access, requiring minimal training for attendants or personnel.
- Durability: Made from sturdy metal materials, parking chains are robust and can withstand various weather conditions and potential wear and tear.
- Flexibility: Parking chains can be used in various locations, including small parking lots, private driveways, or temporary event spaces, where a permanent gate system may not be feasible.
- Manual and Automated Options: Depending on the setup, parking chains can be operated manually by attendants or automated using electronic access control systems, offering convenience for users.
- Visual Deterrent: The presence of a chain across the entrance acts as a visual deterrent, dissuading unauthorized vehicles from attempting to enter the parking area.
While car parking chains are advantageous in many situations, they may not be suitable for high-traffic areas or locations where more sophisticated access control is necessary for security reasons. In such cases, other methods like automated gates, barrier arms, or ticket-based systems may be more appropriate.
“`
editor by CX 2023-10-20